The Phantom Flash Suppressor has been designed to work as a muzzle compensator while maintaining excellent flash hiding capabilities. This 5 port design has no downward facing port which helps eliminate dust problems when shooting in the prone position. The 5C2 features an aggressive front end used in hand-to-hand situations. For 1/2"-28 threaded barrels only. Includes crush washer.
Features and Specifications:
Manufacturer Number: YHM-28-5C2
Five port design
No downward facing port
Aggressive front end for hand to hand situations
For 1/2"x28" threaded barrels only
Includes crush washer
For warranty information, please contact:
Yankee Hill Machine Co, Inc.
20 Ladd Avenue, Suite 1
Florence, MA 01062
1-877-892-6533
service@yhm.net
Features and Specifications:
Manufacturer Number: YHM-28-5C2
Five port design
No downward facing port
Aggressive front end for hand to hand situations
For 1/2"x28" threaded barrels only
Includes crush washer
For warranty information, please contact:
Yankee Hill Machine Co, Inc.
20 Ladd Avenue, Suite 1
Florence, MA 01062
1-877-892-6533
service@yhm.net
YH Flash Hider
Definitely an improvement from the bird cage. Less muzzle rise. The front end looks mean ferocious. Very reasonably priced.
October 23, 2023
Old vet
Nice improvement good price work better than I thought it would
September 23, 2022
Old vet
Nice improvement good price work better than I thought it would
September 23, 2022
YHM AR15 Phantom Compensator...buy one!
This is a high quality Compensator that is very effective in controlling the flash pattern. The slightly longer length helps control more of the flash. The phosphate coating is very will done and the ones that I bought years ago have held up extremely well. Solvents and other fluids to not affect the finish. The end of the compensator have a more aggressive edge and somewhat pointed tips that would be applicable for striking objects or used for direct self defense. For the money, this is the best compensator hands down.
June 25, 2022
Best you can get for the money
This not only looks better than the A2, but it reduces more flash as well. You simply cannot do better unless you spend more than twice as much, plus no tuning fork effect.
June 28, 2018
Looks great on my rifle.
Looks great on my rifle. Did require some fitting which I had heard upon watching a YouTube video. Spent about 15 min sanding the crush washer so that the flash hider would line up properly. Most of the add ons to my rifle are from Yankee hill and so far i have been very impressed with everything I've gotten from them.
February 28, 2014
As other reviews have imp
As other reviews have implied, this is mean looking device to put on the end of your AR. Also like other have implied, installing it was a bit difficult. The hardest part was getting the crush washer to crush. I found a way around that by heating up the washer with a torch until it was more pliable. Then I put the device on until it was in almost the correct position. Once the washer cooled, I pulled the compensator off, put some thread lock on it, and tightened it down to its final position. The washer holds it in place, and the thread lock gives me the added feeling of security that it will not come off.
November 21, 2013
I had same problem puttin
I had same problem putting this onto my Kel-Tec SU-16 that the other review noted, but I noticed that I'd put the crush washer on the wrong way... I flipped I over and it fit perfectly. Hand tightened followed by a quick hit from a wench and its secure and perfectly alighted. I agree it is loud, but it works to kill the fireball that I used to get out of the muzzle.
March 16, 2013
Had no problem mounting.
Had no problem mounting. It was tight but I did it by myself with a wrench. I did have to spin it 360 degrees after it was hand tight, but it wasn't hard.
January 8, 2013
The flash hider is great.
The flash hider is great.
December 27, 2012
Can it be used for both 223 and 556?
Answer:
Yes it can.
Is the finish black or gray?
Answer:
This has a black finish.