The Knurled MZ 1019XP brake has a unique design adding a touch of personality to your build, With its large expansion champer flash is reduced while also projecting sound forward making it an overall more comfortable shooting experience. The MZ 1019 only weighing 0.6 oz makes it a light weight transistion to your rifle.
Features and Specifications:
Manufacturer Number: MZ 1019XP
Thread: 1/2x28
Length: 2.25"
Weight: 3.2 oz.
Material: Machined Steel
Finish: Black Nitride
USA Made!
Fits:
.223
Features and Specifications:
Manufacturer Number: MZ 1019XP
Thread: 1/2x28
Length: 2.25"
Weight: 3.2 oz.
Material: Machined Steel
Finish: Black Nitride
USA Made!
Fits:
.223
11 Ratings
Excellent product
It performs just as advertised. It lessens the concussion at the shooters ears and bystanders. Just what I was looking for when i shoot in prone with by pod. Experienced virtually no blow back of the ground.
June 6, 2022
Ear saver
Works beautifully. Put that sound down range like they said. Swapped between 3 mussels that day and left XTS attached for good
May 4, 2022
Keeps the sound down range enough that you can fire the rifle in the field when you don’t have time for hearing protection, without extreme discomfort. I still wear hearing protection when possible.
April 25, 2022
Great buy.
Very nice compensator, looks nice and directs the sound down range which really helped on my AR pistol.
April 11, 2022
Good product at a reasonable price.
Looks like a nice quality piece. Very easy to install once the Mil spec flash reducer was removed. (That took more than an hour.) I purchased this compensator to insure that the shot clock would pick up the sound during steel challenge but I haven't been to a match yet. The knurled linear compensator seemed to work properly when I put 80 rounds of .22lr through the gun. Very pleased with my purchase and also I feel the price was a bargain.
March 29, 2022
Better than a standard bird cage!!
I love how it looks, and the price was great!
March 15, 2022
Very good especially for the money.
My buddy bought a couple of these and gave me one for my Ruger Ranch .223/5.56. The short barrel made it uncomfortable to shoot from the expected muzzle blast, even with mild varmint reloads. I tried it out yesterday and for all of the various muzzle devices I have tried this is the best for the money I have seen yet. I wish I could get the same for my Ruger Ranch in .300 BO.
February 22, 2022
Good break
Works fine. Fit well
January 25, 2022
Nice textured grip on it fits my barrel great
January 19, 2022
Great value
Absolutely no problem to put on. The forward projection of gas, flash, and sound makes for an overall more more comfortable shooting experience.
September 28, 2021
I would buy this again.
Great products, Great delivery. Thanks you.
May 12, 2020
Do you have anything for my M&P10 .308/7.6251 ?
Answer:
We do not have this exact item available for your firearm. However, we have this item available in stainless and other muzzle devices that are compatible with your firearm. Check out item # 146747 and ARR-046-030 and 2-SPKSBV1019 and ARR-046-016.
Would this fit .22 caliber? Thinking it should.
Answer:
This fits a 22 caliber. If your barrel is threaded 1/2 x 28, than this will fit.
Will this work with 223/556?
Answer:
Yes this item is compatible with .223 Remington and 5.56 NATO. If your barrel is threaded 1/2x28, than this will fit.
Does it work for 5.56 nato?
Answer:
If your barrel is threaded 1/2x28, than yes this will fit a 5.56NATO rifle.
I was told I need a linear compensator so the shot timer will pick up the sound when using .22lr. Will this work for me?
Answer:
This is a linear compensator, however, I cannot guarantee that this will make your firearm loud enough for a particular shot timer.
Will this fit a mini 14 ranch?
Answer:
Yes it should.
Does this include the crush washer?
Answer:
No it is not included. This is a linear compensator, so timing is not required. However, we do have them in stock. I recommend item # ARR-046-210.
Will it fit a 7.62x39 barrel ?
Answer:
No it will not fit.
Will this work with 5.56?
Answer:
Yes, it'll work just fine.
Does this come with a crush washer?
Answer:
No it is not included. This is a linear compensator, so timing is not required. However, we do have them in stock. I recommend item # ARR-046-210.
Will this fit hi point 4595 45acp carbine ?
Answer:
No it will not. I recommend item # GNS-149-113 or GNS-149-114.
What is length?
Answer:
2-1/4"
Do l need a crush washer on my ruger 556 ?
Answer:
It is not required. But there is no harm in using one either.
I need one to fit a 22?
Answer:
This is a 22 caliber. If your barrel is threaded 1/2 x 28, than this will fit.
Will this work on a Ruger PC Charger 9mm with threaded barrel being 1/2x28?
Answer:
No. Physically it would fit the thread pitch but the bore diameter is far to small for 9mm. Per the written description: Fits: .223
Hi I have a Anderson manufacturing am-15 or ar 15 will this fit and do I need anything else to make it work it shoots 223 and 556? thanks
Answer:
Yes, it'll will fit.
Timed correctly??
Answer:
This is a liner comp and shouldn't need to be timed. But if you are concerned, I would recommend that you purchase a crush washer as well.
Will I need a crush washer on my m&p sport ll?????
Answer:
Yes it is best to have a crush washer. Try item ARR-046-210
Does this fit m&p sport 11 ar 15 and do I need any washers or anything else for it to fit?
Answer:
Yes this will fit the Smith & Wesson M&P15 Sport II AR-15 just fine.
will it work on a hi-point carbine 9mm
Answer:
No it will not
Will I have to modify my ruger ar15 5.56/.223 for it to fit?
Answer:
No you will not.
Does it need a lock washer? Or just a high grade thread locker?
Answer:
You would likely want a crush washer and thread locker, potentially shims as well to assure you have it timed correctly
Would this work on 300blk ?
Answer:
No it will not
Will this fit on a smith and Wesson m&p ar-15
Answer:
Yes it will.
Is the item full auto rated?
Answer:
XTS does not explicitly state that it is rated for full auto use, but it should work fine.
Outside diameter?
Answer:
It has a 0.866" outside diameter.
How would this fit on the end of a CZ Scorpion Evo 3 S1?
Answer:
No it will not.
It's described as a compensator, but the design does not look like it would actually reduce recoil at all. Does it reduce recoil?
Answer:
It is a Liner Compensator. It is not designed to reduce recoil, it's designed to reduce flash and make shooting more comfortable by pushing the sound and pressure forward away from the shooter.
Will it work with 556 also?
Answer:
Yes
what is the length
Answer:
3"
Good for .223 and 5.56?
Answer:
Yes
Would this work with a KelTec PLR-22 .22 caliber pistol?
Answer:
Yes it does.