XS Sight Systems has just implemented a product line name change, the sights formally known as the 24/7 Tritium Express are now referred to as the DXT Defensive Express Tritium Rear. Rest assured that even though the name may have changed the quality, craftsmanship and integrity of the product line remains the same. Designed to be the finest sights made for fast sight acquisition in any lighting condition, XS sights certainly don't disappoint. Simply put, by "dotting the I" you can be assured that you are on target quickly and accurately during the critical moments right before you break your shot. Don't settle for other imitations, get the original from XS Sights.
Features and Specifications:
This is not a Glock Factory Product, it is an after market Product
Manufacturer Number:GL-0001S-5
Enhances sight acquisition in any lighting condition
Low profile snag free design
Excellent in high stress defensive situations
Big Dot configuration
Green Trijicon tritium
Tritium Front/ Tritium Rear
Metal Housing
Matte Black Metal Finish
Fits:
Glock 17/19/22-24/26/27/31-36/38
DISCLAIMER: “Glock” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
Features and Specifications:
This is not a Glock Factory Product, it is an after market Product
Manufacturer Number:GL-0001S-5
Enhances sight acquisition in any lighting condition
Low profile snag free design
Excellent in high stress defensive situations
Big Dot configuration
Green Trijicon tritium
Tritium Front/ Tritium Rear
Metal Housing
Matte Black Metal Finish
Fits:
Glock 17/19/22-24/26/27/31-36/38
DISCLAIMER: “Glock” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
6 Ratings
Big dot low price
Very bright sights and only tools needed for installation are a hammer and punch to get the stock sights off. The front site tool is included, the rear is secured using set screws, and red locktite is also included. Great value and easy install!
September 26, 2017
These sights aren't desig
These sights aren't designed for precision target shots. You put the big dot on where you want the bullet to go and that's what happens. Aim center mass, you'll hit center mass. I say this because I see reviews all the time that whine and complain about how these sights 'aren't accurate'. These are PREFECT sights for your EDC pistol (G19 in my case). Extremely easy to pickup the front sight and get it on target. If you carry and if you train as if you carry, not just shooting paper in a lane, you cannot go wrong with theses sights.
June 19, 2014
I've used this on all fou
I've used this on all four of my GLOCKs, and for those revolvers for which it is available. I find that the big dot front sight is easier and quicker to find when you're in a hurry to put a bullet in the target. My last application was to the slide of a Taurus 9mm Slim. Just be sure to use red locktite and let it dry overnight before using the weapon.
November 3, 2013
Quality sights, easy to i
Quality sights, easy to install- no sight pusher needed.Installed these on a Gen 4 Glock 22, couldn't be happier. I seem to get on target, faster with these sights. That big white dot pulls my eye to the front sight, where it should be. Keep in mind folks, these are not target sights. Having said that, watch the Yeager video. Here's what else helped me- I used a laser bore sighter, before I tightened down the rear sight, and applied the red thread locker. Happy shooting!
October 29, 2011
I got this after I saw so
I got this after I saw some of the videos for this product. I have a very bad eye and needed something to help my aim. I have not gotten the full swing of it yet. But, the three times I went to the range last week there was a significant improvement. I am going to order now a set for my Glock 19 as well. I did all the work by myself to put the XS on my Glock 26...it took me about 30 minutes or so. All the tools included and truly it was a piece of cake to do. There are a couple of videos to watch beforehand readily available if you have never done Sight changing...I highly recommend this product and I love Cheaper Than Dirt, the prices are great and they always have what I need.
September 11, 2011
All I can say is wow! I'
All I can say is wow! I've had my eye on these sights for a while and have read many positive reviews on them. I was sold when I watched two shooting videos on YouTube by James Yeager. I ordered them for my G23 to give them a try. Normally you should be able to install these yourself because they include everything you need- front sight tool, hex tool, and red lock tight. If you have the polymer factory sights this won't be a problem, but I had the factory steel night sights with some sort of gorilla lock tight so I had to have a gunsmith take care of it. I put a quick 50 rounds through to give it a test run at 3, 7, and 10 yards. I probably could have covered up my two groupings (head and chest) with a silver dollar. I was shooting very fast too and I am by no means a gunslinging operator. These sights make target acquisition very easy and the accuracy is outstanding. I will be installing these on ALL my handguns. Excellent Buy!
August 15, 2011