Founded in February of 1991, Warne Manufacturing Company set off with the objective of designing, manufacturing and marketing a quick detachable scope mounting system worldwide. Warne continues to deliver innovative and functional scope mounts to shooters everywhere. Let THEM focus on the details so YOU can focus on the target.

Make sure your scope stays securely in place and perfectly zeroed with the Warne Scope Mounts 7.3 Series Quick Detach Ring. The Rimfire rings are designed to fit a very wide selection of rifles with either a 3/8" or 11mm dovetail. This is made possible by using a solid asymmetrical reversible clamp that can be flipped 180° and used on wider or narrower dovetails for the best fit. The 7.3/22 ring is vastly different in design from our Maxima line of mounts. These weigh less due to their 70/30 horizontal construction and are only 1/2" wide. The attachment is mated to the dovetail using a single T-15 Torx style fastener and has 2 of the same fasteners for the ring top strap holding the entire package together securely.

Features and Specifications:
Manufacturer Number: 721LM
Warne 7.3/22 Quick Detach 1 " Scope Rings Medium Matte Black
1" Scope tube diameter
Medium Height
All steel rings with a horizontally split design and only ½" wide
Asymmetrical reversible side clamp fits a 3/8" or 11mm dovetail
Securely mounts to firearm with Torx style T-15 socket cap screws, 25 in/lb. of torque recommended
Color: Matte Black

Fits:
Rimfire rifles with 3/8" or 11mm dovetail



Note: Rings are factory set for 3/8" dovetail (dimple up), for 11mm dovetails, remove clamp and re-install with the dimple down.