Based on the same rugged design as the original Modstock, with additional features designed from lessons from the modern battlefield. The EMOD features a slightly longer stock and butt pad that increases comb for any given length of pull when used on scoped rifles. The buttplate of the EMOD is slightly wider and longer at the toe than the regular M4 stock with a noticeable negative pitch, making transitions from the ready feel much more natural. Extra weight was also added to balance out the normally muzzle heavy feel of combat carbines.

Includes two removable cheek weld adaptors that also act as waterproof storage compartments that will hold three AA or four CR123 batteries each and an additional weather proof compartment is attached to the clubfoot portion of the stock and will hold two AA batteries or other small parts.

Includes VLTOR EMOD stock and receiver extension tube (milspec), buffer and spring, lock plate and nut

Specifications and Features:
Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
Comes pre-assembled with rubber buttpad and strike plate
Matte (anti-reflection/anti-glare) finish
Impact and temperature resistant polymer, specifically blended for VLTOR stocks
Has standard military and quick disconnect swivel socket accessible from both sides
Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
Kit includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
Length with buttpad: 7.75 inches (at centerline of tube)
Weight: 14 oz
LOP fully collapsed: 11.50 inches
LOP fully extended: 15.00 inches
Buttpad angle: -5 degrees with decrease to -15 at toe
Receiver extension is made of 7075 T6 impact extrusion