Features and Specifications:
Manufacturer Number: MNT-RS08L
Medium Profile Riser Mount for Rifles with Picatinny Rail
5.7" Long Picatinny Rail 13 Slots and STANAG Feature for Flexible Accessory Application
Clever Retention Thumb Nuts and Locking Plate for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.83" Saddle Height with See-through Design
Material: Aluminum
Weight: 6.1 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.7 inch
Width: 1.75 inch
Height: 1 inch
See-through: Allows for use of the original iron sights for aiming when installed, design may be low profile with special cutting, high profile with tunnel or clearance so as not to block the user's vision from the rear aperture to front post.
STANAG Dimension: Includes mounting base about 5 1/4 inch long, two through holes about 4 1/4 inch apart and proper clearance below the base for installing the classic STANAG styled scopes originated from Europe that are still popular now.
Manufacturer Number: MNT-RS08L
Medium Profile Riser Mount for Rifles with Picatinny Rail
5.7" Long Picatinny Rail 13 Slots and STANAG Feature for Flexible Accessory Application
Clever Retention Thumb Nuts and Locking Plate for Quick Easy Installation
Precision Made from Aircraft Aluminum with Matte Black Anodizing
0.83" Saddle Height with See-through Design
Material: Aluminum
Weight: 6.1 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.7 inch
Width: 1.75 inch
Height: 1 inch
See-through: Allows for use of the original iron sights for aiming when installed, design may be low profile with special cutting, high profile with tunnel or clearance so as not to block the user's vision from the rear aperture to front post.
STANAG Dimension: Includes mounting base about 5 1/4 inch long, two through holes about 4 1/4 inch apart and proper clearance below the base for installing the classic STANAG styled scopes originated from Europe that are still popular now.
19 Ratings
Heavy duty, works fine, f
Heavy duty, works fine, fits fine and always awesome fast shipping!
February 13, 2014
Read reviews saying it wa
Read reviews saying it was ugly, but it's hardly noticeable where it counts. It's awesome. Large screws for easy hand tightening. Fits rail perfectly. Doesn't interfere with charging handle. Best price out there.
March 7, 2012
Bought this to co-witness
Bought this to co-witness with my iron sights. Need to return for the lower one since it is too high for my application. Going to order the 1/2' riser instead, which should do just fine. Nothing negative about this one. It may be just what you need, but it didn't fit my red/green dot sight. Oh well. Live and learn. May be just what you need. Will recommend.
March 6, 2012
Bought this to co-witness
Bought this to co-witness with my iron sights. Need to return for the lower one since it is too high for my application. Going to order the 1/2' riser instead, which should do just fine. Nothing negative about this one. It may be just what you need, but it didn't fit my red/green dot sight. Oh well. Live and learn. May be just what you need. Will recommend.
March 6, 2012
I bought this for my RRA
I bought this for my RRA LAR-6.8mm SPC. Perfect fit and didn't come loose after a day on the range. This is inexpensive and (if you correctly attach it) secure.
August 8, 2011
Ater getting a look at my
Ater getting a look at my set-up(DPMS panther, .83 riser, red dot,& rear BUIS), my son wanted a similar look for his Sigarms 522. so back to the well I go! as always, CTD was on point with the fast shipping. Part puts his 3x9 at the perfect height.,combine that with his BUIS, foregrip, bipod, and tac-sling, he says that it look just NASTY!!(i could tell from the smile on his face that he meant it as a good thing! thanks again CTD.
July 25, 2011
Got this for my DPMS pant
Got this for my DPMS panther. Just what the doctor ordered! Puts everything at just the right height. some folks say that it's ugly- really didn't notice.I was too busy looking at those pretty little crosshairs!!
July 10, 2011
Got this for my DPMS pant
Got this for my DPMS panther. Just what the doctor ordered! Puts everything at just the right height. some folks say that it's ugly- really didn't notice.I was too busy looking at those pretty little crosshairs!!
July 10, 2011
I bought this for my S.W
I bought this for my S.W M&P15OR and fits on there good. I also bought the 1' but was a little to high so I put that one on my Ruger SR .22, holds on nice and tight. Good deal for the price.
June 29, 2011
UTG offers great utilitar
UTG offers great utilitarian products. This offering is yet another one. Ugly as all get out, but squint your eyes a little and she don't look too bad afterall
June 11, 2011
Got it in 2 days, looks g
Got it in 2 days, looks great. On the M&P this would have been a little better if it had been a 12 slot, sticks over past the upper just a little but no big deal. I have a red dot on mine and raising it up really did the trick. This one is great. Thanks CTD.
May 21, 2011
I bought this riser for m
I bought this riser for my flat top AR-15 I built. The red dot scope I got as a gift was very low, and the front post sight was in the line of sight. With this riser, I can see everything now. Its rock solid! One thing is that it covers the whole length of my AR's rail which leaves no room for a flip up rear sight. But with a hacksaw, cutting off each end will give me plenty of room.
January 27, 2011
I bought this riser for m
I bought this riser for my flat top AR-15 I built. The red dot scope I got as a gift was very low, and the front post sight was in the line of sight. With this riser, I can see everything now. Its rock solid! One thing is that it covers the whole length of my AR's rail which leaves no room for a flip up rear sight. But with a hacksaw, cutting off each end will give me plenty of room.
January 27, 2011
It does exactly what it's
It does exactly what it's supposed to; raises my quick-detach 3-9x scope to a comfortable eye level while still leaving plenty of room for my BUIS to do their job. Stays tight and does the job.
January 14, 2011
Needed a riser mount betw
Needed a riser mount between .5 and 1 inch. It worked perfect.
January 9, 2011
Bought this for a CETME.
Bought this for a CETME. Locked up tight on a low profile clamp rail. CTG is not 'pretty'...it is good stuff for the money. Quality, affordability, utility. Want 'pretty'? Dig deep and cough up the bucks. Want function and dependability at an economical price? ADD TO CART and let CTD apply their top shelf customer service. 1 day shipping as usual. Dropped on my door step.
January 8, 2011
Bought this for a CETME.
Bought this for a CETME. Locked up tight on a low profile clamp rail. CTG is not 'pretty'...it is good stuff for the money. Quality, affordability, utility. Want 'pretty'? Dig deep and cough up the bucks. Want function and dependability at an economical price? ADD TO CART and let CTD apply their top shelf customer service. 1 day shipping as usual. Dropped on my door step.
January 8, 2011
Ugly, heavy and the worst
Ugly, heavy and the worst accessory I have ever added to my ARs.
December 27, 2010
tried this riser out and
tried this riser out and worked well for my large high power tactical scope on a Flat top AR build.
August 20, 2010