Leapers/UTG has again designed the best polymer magazine that is guaranteed to feed and function flawlessly. UTG is known for its quality products and this 15 round 9mm magazine for Glock is no exception. This magazine has endured multiple tests; temperatures ranging from extreme heat to extreme cold, water, dirt, dust, drop and even a weight test. Yes, a weight test, drive your truck over it, pick it up and place it back in your pistol or PCC to continue shooting.
Why spend money on the expensive G-branded magazines that are not guaranteed to flawlessly perform, when you can buy the brand you know and trust, UTG - The Best Never Rests.
Features and Specifications:
Caliber: 9mm Luger
Capacity: 15 Rounds
Durable, Impact Resistant Polymer Construction
Compatible with Reversible Magazine Release
Anti-Tilt High Visibility Follower
Left and Right Side Capacity Holes
High Longeity Stainless Steel Spring
Flared Floor Plate
Guaranteed Reliable Feeding
Black
Fits:
Glock 19 and 26 Models and Most Other Pistol Caliber Carbines, Large Platform Pistols, and Pistol Clones
DISCLAIMER: Glock is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Why spend money on the expensive G-branded magazines that are not guaranteed to flawlessly perform, when you can buy the brand you know and trust, UTG - The Best Never Rests.
Features and Specifications:
Caliber: 9mm Luger
Capacity: 15 Rounds
Durable, Impact Resistant Polymer Construction
Compatible with Reversible Magazine Release
Anti-Tilt High Visibility Follower
Left and Right Side Capacity Holes
High Longeity Stainless Steel Spring
Flared Floor Plate
Guaranteed Reliable Feeding
Black
Fits:
Glock 19 and 26 Models and Most Other Pistol Caliber Carbines, Large Platform Pistols, and Pistol Clones
DISCLAIMER: Glock is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
15 Ratings
Reliable!
pretty good, no issues. feeds perfectly into the chamber with no problems
January 30, 2024
Good mags. No issues
October 25, 2023
Outstanding
Excellent price and quality. Will be ordering more soon!
September 14, 2023
Design flaw, but there’s an easy fix.
I purchased six of these units to decrease time loading at the range. They have a design flaw, which is easily remedied. While trying to insert the magazine into the Glock, nine times out of 10 it would not go past the magazine release, unless it was pressed. After studying the Glock magazine versus the UTC magazine. The Glock had a 45° angle on the top of the magazine and the UTC was 90°. So after filing a 45° angle on the top of the magazine it inserted 10 out of 10 times with no problem. Months earlier I had purchased another batch of UTC magazines in a different capacity that would also fit the Glock. I had not use them and just put them on the shelf. After looking at them, they too had the same problem. Once filing a 45° angle on them they worked great also. So it’s evidently been an ongoing problem for sometime.
June 15, 2023
UTG Mags for Glock 19
I have had zero problems feeding, and works as advertised. The spring is a little stiff and can be harder to load for my old fingers, but an auto loader will take care of that. These are light weight and can’t beat them. Definitely worth it and would purchase again.
May 9, 2023
FITS AND LOADS AS THEY SHOULD GREAT PRODUCT FOR PRICE I WILL PURCHASE MORE.
April 28, 2023
Good for the price
They feed well, seat well in my Glockenstien clone and drop free easy. Everything I look for in a pistol magazine.
April 18, 2023
Decent product
The are decent mags, you get what you pay for in a way they have a little bit of a hard time feeding into the mag well if you’re trying to reload fast
February 18, 2023
Very good and tried them at the range with no problems
January 26, 2023
Great for me
They shipped very quickly. Hard to load but they are new. I like them very much.
December 22, 2022
Good choice
Works great in my Dagger and my AR9
November 17, 2022
Don't buy
Didn't fit well at all. Won't buy again.
November 9, 2022
UTG 9mm magazine
Really liked the price I’ve tortured tested it and it holds up, nice investment if you want reliability and are on a buget
August 13, 2022
Not a good fit!
July 13, 2022
UTG MAGS - A Buyers review
Works great, no issues!
July 12, 2022
How does it work with steel ammo?
Answer:
It will work fine with steel case ammo.
Will this fit a kel-tec sub2000?
Answer:
If your SUB-2000 uses GLOCK 19 mags it will fit.
Will this fit flush, on the bottom of a Glock 19 5th generation?
Answer:
Yes it will.
Will this fit in my glock 19 gen 5??
Answer:
Yes this will fit.
Will theUTG RBT-GL915 magazine with the flared baseplate still work if you have a magwell installed? Wasn't sure if the flared baseplate would allow the mag to seat properly.
Answer:
This magazine is compatible with most flared magazine wells.
Does this fit the Glock 19X?
Answer:
No this will be too short. Try item # MAG-276-008.
Will it work on a 4th gen Glock ?
Answer:
If you have a Glock 19 or Glock 26 Gen 4, then yes this will fit. However, this will be too short for a Glock 17.
Are these gen3 compatible?
Answer:
Yes
Does this fit the psa dagger?
Answer:
This will fit the PSA Dagger Compact. This will not fit the full size PSA Dagger. If you have the full size model try item # 2-MGMPI546BLK.
What grip extension will fit this magazine for my glock 26?
Answer:
Check out item # 2-XGGL26-27C.
Does it fit gen 3 Glock 19?
Answer:
Yes it will.