Durable and Dependable TuffZone Polymer AR-15 Flip-Up Front and Rear Sights
These polymer flip-up front and rear sights are lightweight, durable and adjustable for windage and elevation. Simple to operate, just pull back the lever to flip the spring-loaded sights up. The one-inch overall height only needs .75" clearance above the Picatinny rail. This is a same-plane sight set and is not for use on gas blocks.The sights feature a metal rear aperture and front sight post for improved durability in all conditions. Additionally, they have a metal elevation adjustment turret so you can always ensure your AR-15 rifle. is zeroed-in. With tool-less elevation adjustment, these sights are simple to use and calibrate to your favorite load.
TuffZone Flip-Up Sights Specifications and Features:
- Manufacturer Number: TZ-MSPFR
- Spring-Loaded, Flip-Up Operation
- Positive Click Windage and Elevation Adjustments
- Metal Rear Aperture
- Metal Front Sight Post
- Metal Elevation Adjustment Turret
- Tool-Less Front Sight Elevation Adjustment
- Black Polymer
24 Ratings
Junk!!! Broke on install
Product bike upon install I didn't tighten it too tight even if I did it shouldn't break from me tightening it with my hand. Both from and back sights broke
April 21, 2020
Good by
Price was fair Pros: Lightweight Cons: Fit is a little rough
March 14, 2020
do not buy these
these sights are garbage Pros: none Cons: sights move side to side
September 8, 2019
I would buy this product again
Very good sights for the price. At 50 yards I was able to keep 2 inch groups but I'm sure with a better shooter you could keep much tighter groups. Very pleased with this item
February 18, 2018
Nice
Fit and perform as expected
November 6, 2017
You get what you pay for
The construction seems cheap, novelty quality item. I used it, but it has too much play in the seating in the rail as well as the flip between night/close and day/far sights for my taste. It was adjusted all the way to one side. I set it roughly in the middle by eye, but after time and frustration at the range, I ended up adjusting way back over to one side. That leaves very little room for adjustment at further distances (than 100yd).
October 6, 2017
No
The sights do not fit on the rail of my DPMS AR.
September 20, 2017
Horrible Sights, don't wa
Horrible Sights, don't waste your money. Spend a little more money and get better sights. Put them on the rifle and tried to zero them in, windage was fine but the tool-less elevation adjustment on the front sight was impossible to move. Took them off my rifle and put on an optic, but when I went to put them back on the screws stripped out and wouldn't stay tight on the rifle. HORRIBLE wish I had gotten Magpuls instead
November 23, 2016
Very good for the price.
Very good for the price. As stated, the fit is finicky but I tightened the crud out of them until they didn't move. Seems to have fixed it, overall great for the price.
October 22, 2016
So far these sights are g
So far these sights are great. Shot a little low out of the box but easy to fix. Great flip ups when the alternative costs 4 times as much
August 13, 2016
decent set of backup iron
decent set of backup iron sights for an AR. I had no intention of paying more for a pair of backups when I plan to eventually put an optic on it. They went on easy and stay on tight and the rear sight is very easy to adjust with a nice audible click. my only complaint is adjusting the front sight, it's nearly impossible. I haven't been able to get my rifle sighted in properly because I can't get the knob for the elevation adjustment to turn.
July 27, 2016
Great sights for the pric
Great sights for the price. Worked Great on my AR Pistol. Two slight adjustments and I was on Target. Better than paying more for any other brand. Very happy
May 3, 2016
I put them on my AR15, wo
I put them on my AR15, worked great until I realized I had put the front sight on backwards. As I tried to undo the screw that held it in place on the rail I somehow snapped the threaded end of the screw off. Save your self some time and just go with something else. I replaced them with the Magpul kind and haven't had a problem since.
March 22, 2016
great value. fits my JR c
great value. fits my JR carbine great
March 8, 2016
These sights are exelent
These sights are exelent for the money.They install easy just sliding them down the rail front to back with the mounting screw removed then replacing the screw. Zeroed at 100 meters in one adjustment.
February 21, 2016
I like these sights. I d
I like these sights. I don't shoot open sights very often, but when I do, these get the job done.
December 8, 2014
Very strong polymer, the
Very strong polymer, the ghost ring and front post are metal. Easy to adjust and clear to see through. The only problem that occurred to me was the tightness to get them onto my rail. but nothing a few gentle taps from a soft rubber mallet can't fix.
August 23, 2014
First off, they are inexp
First off, they are inexpensive so I didn't have high expectations. Bought for my daughters M&P 15-22 so I wasn't looking to spend a lot. Already have a red dot installed but wanted a set of back up sights. These install easy enough- but you have to tighten them really well or they wobble. My main complaint is the rear sight will not lay flat if you use the small aperture setting. On the large aperture it will lay flat and click into place. So you have to either switch the aperture after they flip up or you have to be content with looking through the big hole all the time. Seems backwards to me. I have a Magpul on my AR and it's a much better product but also considerably more expensive.
July 6, 2014
just what i wanted for th
just what i wanted for the price this are set up for close range while the scope is for long range
April 17, 2014
These are just as functio
These are just as functional as some other simailer sites on the market for a fraction of the price. Only thing I have an issue with is the post for the front sight being slightly loose.
March 10, 2014
Great set of sights for t
Great set of sights for the price. No issues as of yet.
February 26, 2014
These flip up sights are
These flip up sights are lightweight and durable. However, when mounting the sights they remain loose and unstable. I've never had an issue mounting optics to my quad rail so I'm going to have to make modifications to these sights for stabilization. Just remember guys you get what you pay for...
February 9, 2014
Install easily, work like
Install easily, work like they should, and are the right price. I was shooting pop cans at 75 yards easily. I have no intentions of ever spending 100$ on a pair of sights just to have a name on the side. Don't hesitate to buy these! They are great!
February 8, 2014
I bought these for a Moss
I bought these for a Mossberg Warhammer so I could shoot slugs at distance accurately. They mounted and worked perfectly. I was unsure about them because they are polymer, but the sights themselves are steel the body is the only polymer and they are durable...I haven't broke them yet anyway. I think these are a great choice!
January 28, 2014
Will sites work on a DPMS Oracle?
Answer:
No it will not. You need a taller front sight that is set up for a lower 1/3 gas block. Check out item # ARR-833-372 and ARR-801
Will these sights fit on the T rail
Answer:
Yes!
Will these sites fit m-lol?
Answer:
No
Does this tuffzone rear sight line up with standard A2 front sight, off pinn. rail of standard AR-15? Thanks
Answer:
Yes.