Precision stamped and formed from 4130 chrome moly steel with durable hard coat finish to provide years of service, the Tango Down Vickers Tactical slide stop is that essential piece of gear you cannot be without. The Vickers Tactical slide stop allows for easy slide release and locking even when shooting with gloved hands. The Vickers Tactical slide stop should be installed by a professional gunsmith.
Specifications and Features:
This is not a Glock Factory Product, it is an aftermarket Product
Tango Down Vickers Tactical Slide Stop VTSS-001
Reshaped Thumb pad with deep serrations
Allows for easy slide release and lock with gloves
Precision stamped from 4130 chrome moly steel
Non glare black hard coat finish
Fits the majority of Glock pistols
Made in the USA
Professional gunsmith installation recommended
Overall length 2.38"
Overall weight 0.2 oz
Black
Fits:
Glock 17/17L/18/19/21/22/23/24/25/26/27/28/31/32/33/34/35/41
DISCLAIMER: "Glock" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Specifications and Features:
This is not a Glock Factory Product, it is an aftermarket Product
Tango Down Vickers Tactical Slide Stop VTSS-001
Reshaped Thumb pad with deep serrations
Allows for easy slide release and lock with gloves
Precision stamped from 4130 chrome moly steel
Non glare black hard coat finish
Fits the majority of Glock pistols
Made in the USA
Professional gunsmith installation recommended
Overall length 2.38"
Overall weight 0.2 oz
Black
Fits:
Glock 17/17L/18/19/21/22/23/24/25/26/27/28/31/32/33/34/35/41
DISCLAIMER: "Glock" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Not for me
Well, for my medium hands on a Glock19 size frame it was not the leap forward hoped for. The rear point of contact with the skin could be rounded and smoother to reduce pain, or for large hands you'll just be pushing down the flat upper tab. The front to back dimension could be longer to avoid having to shift my grip to reach it, again good for large mitts, I guess. That said, Vickers makes good workable parts, but I'm going with a factory extended lever here to fix my little problem.
April 4, 2022
Great value!
Feels great, easy to install. Well worth the money.
October 2, 2018
Check your grip
Well made and very easy to install on my G19 and functions great. However, my small hands require a very high purchase on the gun. This causes my palm below my support hand thumb to hit this device during operation and causes premature slide locks. I can see where this would be great for some but not for me. Pros: Well made easy to install Cons: High grip purchase can cause premature slide loc
September 9, 2018
Quality product and fast shipping
Just what I ordered. Came in a couple days. Can't go wrong with CTD.
February 19, 2018
Massive improvement
Massive improvement over tiny stock Glock 26 slide stop.
November 17, 2017
I purchased this and 6 ot
I purchased this and 6 other slide stops from other brands for my Glock 30 Gen 3. Yes, although the Glock 30 isn't listed, it fits perfectly. In my opinion, it's the best one on the market. It looks closest to the OEM slide stop, it protrudes just enough to provide a firm grip (even with gloves) without getting in the way of my kydex holsters like the other slide stops did, and it doesn't poke you when wearing some IWB holsters. Will definitely be getting for my other Glocks.
March 10, 2017
Having owned and carried
Having owned and carried GLOCKs for years, I've learned that there is verylittle to add to it to help it run better. Iron sights are 1, because thepolymer ones can pop off (it happened to me). So I always put Trijicons on. A 4.5# connecter. And a Vickers slide release, because it is just long enough to reach when releasing the slide and it feels like the original.
November 2, 2013
Having owned and carried
Having owned and carried Glocks for years, I've learned that there is verylittle to add to it to help it run better. Iron sights are 1, because thepolymer ones can pop off (it happened to me). So I always put Trigicons on. A 4.5# connecter. And a Vickers slide release, because it is just long enough to reach when releasing the slide and it feels like the original.
November 2, 2013
I had this installed, in
I had this installed, in less than 2 minutes. This should be a factory part. Ergonomically wonderfull, the stop is positioned perfectly. I can engage, without any struggle what so ever.. Thanks, CTD!
March 24, 2013
By far the best slide rel
By far the best slide release made for a Glock. Installed in less than a minute and did not need gunsmithing. Well worth the money and Cheaper Than Dirt did a great job getting it to me before the estimated time of delivery. Thanks, CTD
February 27, 2012