Established in 2010,TacFire offers an extensive line of sporting good products ranging from riflescopes, red dots, flashlights, Iron sights, Mounts and much more accessories. They serve the needs of their consumers by offering their wide variety of accessories for many different firearm platforms.
AR-15/M4 two-piece quad rail drop-in design is constructed of T6 6061 anodized aircraft grade aluminum for strength and durability. This will replace the hand guard and will give you plenty of space to mount accessories such as: optics, lights, lasers & other tactical gear. It is compatible with most rifle length direct impingement gas systems and accepts all standard Weaver/Picatinny 1913 accessories. Includes all hardware needed, no gunsmithing is required.
Features and Specifications:
Manufacturer Number: HG01-12
Length: 12"
Weight: 17.2 oz.
Color: Black
Machined 6061-T6 Aircraft Grade Aluminum
Type III Hard Coat Anodized
AR-15/M4 two-piece quad rail drop-in design is constructed of T6 6061 anodized aircraft grade aluminum for strength and durability. This will replace the hand guard and will give you plenty of space to mount accessories such as: optics, lights, lasers & other tactical gear. It is compatible with most rifle length direct impingement gas systems and accepts all standard Weaver/Picatinny 1913 accessories. Includes all hardware needed, no gunsmithing is required.
Features and Specifications:
Manufacturer Number: HG01-12
Length: 12"
Weight: 17.2 oz.
Color: Black
Machined 6061-T6 Aircraft Grade Aluminum
Type III Hard Coat Anodized
16 Ratings
Easy upgrade
Easiest upgrade I've ever done, replaced M-lok with this drop-in two piece quad picatinny and now all my accessories fit.
November 22, 2021
Fit perfect. And looks awesome
November 18, 2021
Garbage
Product is egg shaped wouldn't fit rifle. Nor did it come with parts to be installed. Complete waste of money
November 16, 2021
Manufacturer mold is okay but custom never hurts!
Customer loved it, after a little grinder she was snug tight!
October 27, 2021
Good quality, great price, but needs fitting.
Nicely made and from good strong aluminum. But be prepared to do some filing to fit around the barrel nut. Tried it on 3 AR's and the same on all, just a bit too big. But, too big is better than a sloppy fit that's too loose. I'll but another soon.
October 3, 2021
Good for the price
For the price it’s fine. I had to take a grinder to a couple points on both pieces so they would fit over the barrel nut. Once that was done they fit well and are tight. I don’t prefer the large size of the four pic rails but it’s a cheaper alternative and beats the A2 plastic hand guard. Good stuff for the price…
September 5, 2021
Doesn’t seat at delta ring.
Will not seat properly at the delta ring so it’s literally useless. Dimensions are off. Spend your money elsewhere. Can’t get tacfire to respond to email regarding these install issues.
August 14, 2021
Looks good
This thing looks nice, in my opinion it should come with a cap for the end it was a real pain to install, somewhere between a super tight fit and not quite made right but it's on and I'm not taking it back off and I am satisfied with it. Cons: Hard to install
March 31, 2021
Perfect fit but difficult to install
I bought this for my M16A4. It feels and looks like its made with great quality material. It fits great with zero movement. You will need a a delta ring tool to install this rail or you might have a hard time like I did. I hard a hard time aligning the bottom rail to the barrel not. For some reason, it won't go in. I finally gave up after struggling with it for 20 minutes so I decided to use a rubber mallet and hammered it in. This rail looks awesome on my M16A4!
June 18, 2020
Did not fit my Colt Match H-bar.
Had to machine the hell out of the base with a dremel to get it to seat correctly on my Colt Match H-bar. Slipped a little and now needs some touch up. That part is on me. Nothing about this was drop in.
June 6, 2020
Very very tight
This handguard is very great quality for the price, its light weight while still durable. It fits very tight, you may think it's too tight but it's not, you just need to Depress the delta ring as far as you possibly can and hammer it on with a rubber mallet, you may need to ask someone for an extra set of hands on this specific handguard. But once it's on it is an amazing fit that doesn't give at all making for a super solid handguard. I wouldn't recommend for beginner builders, especially if you haven't dealt with drop in handguards before, but overall great buy! Pros: Tight fit Cons: Hard to put on
May 25, 2020
Great product, exact fit
This was an exact fit for my sporting rifle. Bushmaster AR 15 platform. It is tight, saw comments about filing or dremeling. DO NOT. Product is exact fit, fit handguards in upper triangle one at a time, use delta ring tool to pull delta ring down. Use a RUBBER mallet to tap into delta ring. Then finished put screws in and add attatchments.
January 23, 2020
i would by this again
have yet to range test, fitting was exact...MUCH TOO exact..on my hbar marksman model the d ring would not go back far enough for the grips to slide in...i could get either the top...or the bottom...but not both...luckily i know a bit about this particular weapon system..and i was able to carfully use a dremel to shave down the seating prongs so i could get both to fit (not recommended if you dont know what you are doing as this is around the gas tube for direct impigment system)...once installed it is great...VERY SOLID...VERY WELLMADE....i would recommend proffesional instalation unless you are VERY FAMILIAR with your particular firearm.
October 10, 2019
It fits and is snug
I bought this as a simple and cost effective way to upgrade my A2 HBAR, which still had the factory hand guards. Out of the box I was a little worried it wouldn't fit with the triangle shape of the front post, that normally fits with the OG hand guards. But overall it is a very good fit, and seems pretty solid.
August 24, 2019
Awesome fit
Fit like it should with no problems, its secure with no wobble at all. Had no problems installing this at all, simple to use.
December 30, 2018
Avoid at all cost
Tried to install on a PSA upper and it was a disaster. Tacfire combo tool broke,and the handguard was pointed the wrong direction. Almost 1/2 inch off horizontally. A little better vertically. Cheap parts, but ya get what ya pay for. Pros: None at all Cons: Won't line up with the barrel
May 7, 2018
Will this work with the triangular end cap?
Answer:
It should
Is this compatible with S&W M&P sport 2, .223/5.56? Easy to install.
Answer:
No this will not fit. I recommend item # ARR-238. Changing a handguard is simple, however, I recommend watching the video in the link below for installation instructions. https://www.cheaperthandirt.com/leapers-utg-pro-ar-15-carbine-length-drop-in-quad-rail-hand-guard-aluminum-anodized-matte-black/FC-4712274525061.html
Will this fit my bca 20 inch upper with triangle end cap?
Answer:
Yes it should.
Will this fit a dpms Oracle 5.56?
Answer:
Not likely the oracle was a Carbine gas system. Try item ARR-238
Will this fit on a Stag Retro 15?
Answer:
Yes it should.
Will this fit and Adams arms P1 AR-15?
Answer:
This is a Drop in for Rifle length systems. The P1 looks to be a carbine system, so it would not fit.
Will this fit ruger ?
Answer:
No, probably not.
Does this fit a Triangle end cap?
Answer:
Yes this item will fit a Triangle end cap.
Do you have a how to video?
Answer:
There are several videos for the installation of the TacFire rails available on YouTube.
Will this fit in an AR-15 bushmaster ?
Answer:
It will depend on the length of your gas system. This will fit any AR-15 platform rifle with a delta ring and end cap that requires a rifle length two piece drop in handguard.
Will this fit a M&P ar15 16" ?
Answer:
Yes, but you may also have to change your gas block.
Will this fit a carbon 15?
Answer:
This will fit any AR-15 platform firearm with an industry standard rifle length gas system that requires a two piece drop in handguard.
Will this fit my ATI Omni Hybrid Maxx P3 .223/5.56 NATO w/ 16 Barrel? Also, will it fit by itself or are other part(s) required to mount?
Answer:
No this will not fit. Try item ARR-238
Will this fit on a SIG 516 patrol?
Answer:
No it will not.
Will it fit on a m+p sport 2?
Answer:
No it will not. Try item ARR-276-091
Do I need a low profile gas block?
Answer:
No. This is a two piece drop-in handgaurd for a rifle length gas system. It will lock-in between the delta ring at the receiver and the end cap, just before the front sight/gas block.
Does this come with a barrel nut?
Answer:
No, it is not a free float rail so it would use the delta ring assembly and encap to mount to the receiver
I have a Diamondback A.R. 15. Will this fit my rifle and if so what other parts will I need to make this work?
Answer:
It will fit on any AR-15 with a delta ring, circular handguard endcap, and rifle length gas system
Will it fit Ruger AR 556 carbine? If so what all will I neeed for it to work?
Answer:
No. It will fit on any AR-15 with a delta ring, circular handguard endcap, and rifle length gas system
I have a M&P AR 15 Sport 2. What do I need for this to fit correctly? Thanks
Answer:
You would need a rifle length gas system, circular handguard endcap, and delta ring.
If this is for the circular end caps, do you a 12" 2 piece for triangular end caps?
Answer:
It is for circular handguard end caps. The Magpul rifle length MOE forend will fit triangular endcaps. Try item 2-MPIMAG427GRY
Will this fit a S&W M&P 10?
Answer:
No it will not.
Is this for a triangle or circle retainer plate?
Answer:
This should fit both.
Will this work on my Anderson am 15
Answer:
It will fit on any AR-15 with a delta ring, circular handguard endcap, and rifle length gas system
Will this 12 inch rail fit my Bushmaster H-bar ,it has a triangular end cap up top.
Answer:
No it will not, it needs a circular handguard end cap to fit properly
Is this hand guard designed for a carbine rifle?
Answer:
No it is not.
Does the MP sport 2 fit this straight from stock
Answer:
No. This is for a rifle length gas system. The M&P Sport II utilizes a carbine length gas system.
Do I need to change to a low profile gas block on my bushmaster carbon 15 to use this?
Answer:
No, it is a drop in, it doesn't require a low profile gas block. You simply need the correct gas system length. It will not fit the Carbon 15
Will this fit a Colt expanse M4 carbine?
Answer:
No. It will fit on any AR-15 with a delta ring, circular handguard endcap, and rifle length gas system
will this fit onto a DPMS panther arms ar15?
Answer:
It will fit on any AR-15 with a delta ring, circular handguard endcap, and rifle length gas system
Will it fit ruger ar .556 ?
Answer:
No. Only if it has a rifle length gas system, round handguard end cap, and delta ring
Will it fit a m&p sport 15
Answer:
No.This Only fits an AR-15 with a rifle length gas system, round handguard end cap, and delta ring
Will this work on a JR .45 Carbine?
Answer:
Yes it will if you have a low profile gas block
will this hand guard wok on my bushmaster ar 15
Answer:
If it uses a rifle length gas system, delta ring, and circular handguard end cap it will.
Can the factory triangle front sight and gas system on a standard Palmetto State AR15 remain intact with this setup?
Answer:
You would have to use a round handguard end cap
Will this fit on a Smith and Wesson MP15 sport 2?
Answer:
It will fit if you have a rifle length gas system and round handguard end cap.
Will this fit on Triangle, or circle end cap?
Answer:
It will fit circular hand guard caps
Will this fit an Anderson Arms Am-15 ?
Answer:
It will fit if you have a rifle length gas system.
would this work on areo precision 300 blk
Answer:
It will work on any rifle length gas system.
Do I need an end cap w/this style drop in quad rail,I'm using a low profile gas block w/standard length gas tube. Thank You Mike Gray
Answer:
Yes, you would need a circular handguard endcap to accommodate this drop in handguard.
Will this fit a bushmaster carbon 15?
Answer:
No it will not.
Will this fit on a colt H-bar spotter rifle?
Answer:
It will fit any AR-15 with a rifle length gas system.
Will this fit on an Aero Precision AR-15?
Answer:
It depends on your rifle's current configuration. You may have to replace the gasblock with a low profile gas block.
will this fit the Bushmaster XM15-E2S
Answer:
Only if it uses a Rifle length 2-piece handguard.
Will this work with bushmaster xm15-e2s if I change the gas block
Answer:
If it does not have a rifle length gas system, it will not fit.
Will this fit the dpms oracle AR-15?
Answer:
No it will not. Check out item # ARR-238.
Will this fit a Smith & Wesson M&P15 Sport 2 with a 16" barrel?
Answer:
No it will not.
Will this fit my del-ton echo 316l ar-15?
Answer:
No it will not. Check out item # ARR-238
Will this fit my del-ton echo 316l at-15?
Answer:
No it will not. You will need a carbine length drop-in handguard.
Will This fit the Springfield Armory Saint AR 556?
Answer:
No, the current Saint AR556s come with a mid-length gas system. Check out item # ARR-241
I have a carbine length gas system, will this fit over it with a .750 low profile gas block?
Answer:
No, this handguard will not work with a carbine length gas system. This is a drop-in two piece handguard that requires a round retaining cap and a rifle length gas system to fit. Check out item # ARR-397 or ARR-398
Will this fit an m&p sport 2. It don't have the triangle sight. It has the short 7" handrail. It has a regular gas block and tube. How can I make this work or what item will work. Also need item # for the gas block and length tube I need.
Answer:
This will not fit your Sport 2. If you want to add a handguard to your existing rifle without changing the gas system, check out item # ARR-276-091 or ARR-238... If you are changing out your gas system and still using the existing barrel, you will need gas tube, gas block, and free-float handguard. Check out gas tube, item # ARR-089-151. Check out gas blocks, item # ARR-089-016 or ARR-9243. Check out free-float handguards, item # ARR-398 or ARR-276-039.
Will this fit a Smith & Wesson AR15? Model M&P-15?
Answer:
It depends on what model you have. If you have a Sport 1 or Sport 2, than you need a carbine length drop-in handguard. Check out item # ARR-238.
Will it fit FN15 rifle length? Does it have any QD sockets?
Answer:
This will replace a drop-in handguard for a rifle length gas system. It does not have QD sockets.
What handguard will fit an Anderson AR 5.56/.223?
Answer:
Probably not.
My rifle has a delta ring. Will this work with that? If not which barrel nut do you recommend
Answer:
If it has a rifle length gas system, yes it will.
will this fit over a carbine length low profile gas block?
Answer:
Please note this is a 2-piece drop-in handguard for use with rifle length gas systems.
What is the diameter of the Handguard opening? As in the hole in which the barrel comes through
Answer:
This is a standardized two piece rifle length drop in handguard that is closed off during installation by the delta ring on the receiver side and the handguard end cap behind the front sight on the other side. They do not make the inside diameter measurement available.
would.this fit into my M16A1
Answer:
This is a rifle length two piece drop in quad rail. It should fit an M16A1 just fine.
Will this fit a ruger ar 556?
Answer:
No it will not.
I have a Wyndham AR-15 with a 12 carbon hand guard. Ordered this for my gun, but it didn't come with a Barrell nut. Do I need one to get it to attach to my AR?
Answer:
It would depend on the configuration of your current rifle.
Will this item fit the round handguard retainer or is if for triangle style only?
Answer:
It's round only.
Would this fit an ati Omni hybrid multi cal ar15
Answer:
No. This is a drop in handgaurd for a rifle length gas system. The ATI Omni Hybrid uses a carbine length gas system.
What longer hanguard will work for an m&p 15 sport?
Answer:
If it has the A2 front sight item ARR-157 will fit
Will this fit a High standard model HSA-15 in 5.56?
Answer:
No.
If this handvuard doesn't work with M&P 15, which models will?
Answer:
Any Carbine drop in would work. Try item ARR-238
Will this fit a M&P AR15 S&W
Answer:
No it will not.
Will it fit a DPMS panther sporticle ar 15 carbine
Answer:
No it will not.
Will this handguard fit a Armilite Rifle 15 A2 without any modifications?
Answer:
Yes
Will this fit the Black Rain Ordnance 5.56 Spec15?
Answer:
No. Try item ARR-398
Will a laser mounted on this handgaurd retain zero or does the handgaurd wonble
Answer:
It would retain zero.
Will it fit a colt 6920
Answer:
No it would not. Try item ARR-176-004
Bought a Eagle Arms eagle 15 was wondering if this product would work?
Answer:
Only if it has a 20" barrel.
Will this fit bushmaster ar15 with circle end cap
Answer:
If it has a 20" barrel, yes
Does this fit for a circle gas block ring or a triangle?
Answer:
Circular
Will it fit ruger ar 15 556
Answer:
No it will not.
I have the palmetto state armory 16.5 inch. Will this fit if I take off the front sight? And will it fit appropriately?
Answer:
No, try item ARR-631-044 and you will need item ARR-276-095
Will this fit an Anderson Manufacturing AM-15 optic ready 16" rifle
Answer:
No it will not.
Will it fit anderson mfg. Am-15 multi caliber?
Answer:
Probably not. This would fit an Anderson with a Rifle-length handguard, but most are Carbine length.
does it fit a bushmaster xm15 e2s?
Answer:
If it has the 20" barrel and/or the 12" polymer two-piece handguard it will.
Will this fit a smith and Wesson m&p15 sport 2
Answer:
No it will not.
Will this quad have the necessary accessories to mount in a Delton 20" AR15 multi cal government rifle ?
Answer:
Yes
Will this fit a diamondback AR-15
Answer:
Yes
Will this fit a bushmaster qrc?
Answer:
No it will not
Will this fit a Ruger ar-556?
Answer:
No it will not.
Will this fit my Pametto state armory 16" AR 15?
Answer:
No it will not.
Will this fit my FN FN-15 SRP TACTICAL?
Answer:
No
will it fit an ar-15 5.56 NATO 16" barrel if im building it from scratch
Answer:
I suppose you could make it fit if building a dissapator-type upper.
Would this fit Oracle DPMS?
Answer:
No
Will this fit a M4 carbine 5.56?
Answer:
No it will not.
Will this fit Ruger AR-15?
Answer:
Will this fit a,Ruger AR 15?
Will this fit on a m&p 15 sport 2
Answer:
No it will not. Item ARR-631-017 will fit
I cannot get this product to fit on my 20" psa ar with a triangle end cap. Is this product not compatible?
Answer:
TacFire now makes this to only fit the round end caps.
Will this go on my ds-15 16 inch barrel
Answer:
No. This replaces rifle-length handguards only.
Will this fit a core 15
Answer:
Probably not. This will replace only Rifle Length hand guards.
Is this item able to be returned?
Answer:
Yes it is.
Will this fit m&p ar 15 sport II
Answer:
No it will not. Item ARR-631-017 will fit.
Will this work with an Olympic PCR 02 AR?
Answer:
If your rifle has the rifle-length gas system then yes. If it is the carbine-length, no.
Will this work on a dpms oracle .223/5.56
Answer:
No it will not.
What is the inside diameter of this quad rail?
Answer:
This is a drop-in rail, so that is not a normal measurement we have access to.
Will this fit 20 inch barrel with an a2 front sight?
Answer:
Yes it will.
Will this fit on a bushmaster xm15?
Answer:
Only if it has the 20" barrel.
Will this fit on my rifle length AR10
Answer:
Yes it will.
I have a triangular front mounting plate. DPMS Panther AR-15. Existing handguard is 15""". Is this product compatible?
Answer:
This fits the round end plate.
Will this fit a diamondback db15 in 5.56?
Answer:
No it will not. You will need a freefloat handguard or a shorter drop-in.
Does anyone know if this will fit a colt AR-15 A4 20 inch barrel?
Answer:
This will fit.
I have the Del ton echo 316L with the factory handguard. Can this work on my ar15
Answer:
No, the Echo 316L comes with a CARBINE length handguard and the handguard you are inquiring about is RIFLE length. A drop-in CARBINE length handguard will be easier. Check out item # ARR-631-017 and item # ARR-046-028
Will this fit a S&W M&P 15 Sport if I replace the A4 sight with a low profile gas block? What other parts besides the gas block will I need, if it will fit?
Answer:
This will not fit as it is a rifle length Drop-In handguard; you will need a free float handguard. I recommend item # 104000.
will this fit a m&p 15-22 and if so what other parts do i need to install
Answer:
Unfortunately that handguard will not fit as the M&P 15-22 uses a proprietary barrel nut.
Will it fit a Ruger 556 ar 15
Answer:
No. This will only work for rifle length AR-15s
Will this fit a Ruger A.R. 15 223 and 556
Answer:
No. This will not fit carbines
Will this fit on a palmetto dissipater upper receiver? I have Magpul rifle length handguards on it at the moment.
Answer:
Yes it will.
Does anyone know if this will fit a Windham Weaponry .223/5.56 CF model?
Answer:
Yes, it will.
Will this fit a Palmetto PA-15 Multi 5.56
Answer:
No, it will not.
will this fit bushmaster xm15. triangle front cap
Answer:
No, it's for round end caps.
Will this fit a Delton echo 316l
Answer:
No it will not. Try item 2-NSTARMAR4S
Is this supposed to be a free float rail? I am having issues with fitting it to a smith and wesson m&p 15 sport
Answer:
This is for a rifle length gas system. It will not fit your carbine-length rifle.
Will this fit an anderson am 15
Answer:
This is for a rifle length gas system. It will not fit your carbine-length rifle.
Will this fit my bushmaster carbon 15??
Answer:
Yes it will.
Will this fit on a full size ar15 with the A frame at the end?
Answer:
Yes it will.
will it fit a Smith & Wesson M&P 15
Answer:
Yes, it will.
will this fit a RRA AR-15 A2 variant with a triangular end cap and slip ring? (12" length)
Answer:
This is for round end caps.
will this fit on a DPMS Oracle
Answer:
No. This is for rifle length platforms.