SKS Magazine Installation Instructions:
1. MAKE SURE YOUR SKS IS UNLOADED!
2. Lock bolt open and switch the safety on.
3. Take out trigger assembly. To do so turn SKS upside down and look behind the trigger guard for a detent. With a Phillips head screwdriver insert the tip into that detent and push forward. This will release the trigger guard causing it to come out of the SKS.
4. Remove Factory 10rd. Magazine Assembly. The magazine will remove after the trigger assembly is out of the way. The magazine should just pull out easily provided the bolt is still locked back.
5. Remove the Butt Stock from Barreled Assembly. The butt stock will come out if you grab the barrel and gas tube in front of the wood stock and lift. While the SKS is upside down, with the right hand slap the Butt Stock where your cheek rest when shooting and the Barreled Assembly will separate from the Butt Stock.
6. Disassembling the SKS allows you to see how the NEW MAGAZINE mounts to your SKS. Under the rear sight on the bottom side of your SKS is a block with a notch where the extension of the NEW MAGAZINE inserts. Once the extension is in the notch you will be able to rock the magazine into the slot in the rear of the magazine well.
7. Now put your SKS back together with your NEW MAGAZINE in place. Go shooting and function test your SKS with all of that ammo you bought from CHEAPER THAN DIRT.
1. MAKE SURE YOUR SKS IS UNLOADED!
2. Lock bolt open and switch the safety on.
3. Take out trigger assembly. To do so turn SKS upside down and look behind the trigger guard for a detent. With a Phillips head screwdriver insert the tip into that detent and push forward. This will release the trigger guard causing it to come out of the SKS.
4. Remove Factory 10rd. Magazine Assembly. The magazine will remove after the trigger assembly is out of the way. The magazine should just pull out easily provided the bolt is still locked back.
5. Remove the Butt Stock from Barreled Assembly. The butt stock will come out if you grab the barrel and gas tube in front of the wood stock and lift. While the SKS is upside down, with the right hand slap the Butt Stock where your cheek rest when shooting and the Barreled Assembly will separate from the Butt Stock.
6. Disassembling the SKS allows you to see how the NEW MAGAZINE mounts to your SKS. Under the rear sight on the bottom side of your SKS is a block with a notch where the extension of the NEW MAGAZINE inserts. Once the extension is in the notch you will be able to rock the magazine into the slot in the rear of the magazine well.
7. Now put your SKS back together with your NEW MAGAZINE in place. Go shooting and function test your SKS with all of that ammo you bought from CHEAPER THAN DIRT.