Removes cartridges which have has a case head separation broken off in the chamber of a gun. Works on SKS or AK type rifles. Very necessary as it is impossible to get a broken shell out without this tool. Goes into the back of cartridge with the a case head separated. Catches the spent shell on the inside neck and pull it out by using the guns regular extractor. Will work on bolt action and semiautomatic rifles.
Instructions for use:
When the head is torn from the case leaving the majority of the shell casing inside the chamber of your weapon. You will need a Broken Shell Extractor (BSE from here on out) to safely remove it from the chamber.
1. Insert the narrow end of BSE into the chamber with the casing stuck inside. Make sure that the inner pin is unscrewed so the end is not flared. (You will know it when you see it)
2. Once the BSE is proplerly installed into the chamber you can release the bolt. Then you can pull the bolt back, by doing so it will pull the BSE back and and the end will flare and grab the case opening where the bullet was and pull it out like a regular loaded round.
Keep one with your shooting gear, in your gunsmithing kit, or gun case. A handy must have item for shooters and hunters.
Instructions for use:
When the head is torn from the case leaving the majority of the shell casing inside the chamber of your weapon. You will need a Broken Shell Extractor (BSE from here on out) to safely remove it from the chamber.
1. Insert the narrow end of BSE into the chamber with the casing stuck inside. Make sure that the inner pin is unscrewed so the end is not flared. (You will know it when you see it)
2. Once the BSE is proplerly installed into the chamber you can release the bolt. Then you can pull the bolt back, by doing so it will pull the BSE back and and the end will flare and grab the case opening where the bullet was and pull it out like a regular loaded round.
Keep one with your shooting gear, in your gunsmithing kit, or gun case. A handy must have item for shooters and hunters.