SGM Tactical is a company founded on the belief that using cutting edge materials and modern manufacturing processes, better products could be designed. SGM Tactical strives to build the best and most affordable aftermarket magazine on the market, not because they can, but because you expect it.
Using innovated polymer technology the magazines meet the requirements for three 922r compliant parts. Each magazine is built using Dupont composite/glass-filled polymer that is extremely durable, internally slick, and fast feeding to provide years of service. The slightly longer springs provide a more uniform pressure and are specially coated to provide smoother action along with resisting moisture.
Features and Specifications:
Manufacturer Number: SGMTMG17
SGM Tactical 9mm Magazine 17 Rounds For Glock 17 Polymer Black
Calilber: 9mm
Capacity: 17 Rounds
Body Material: Polymer With Heat Treated Metal Lining
Spring Material: Stainless Steel Spring
Follower Material: Polymer
Follower Color: Black
Easy to load
Drop Free
Heat treated continuous sheet, metal lining (1 piece lining)
All aftermarket base plates work
Lifetime Consumer direct warranty
Finish: Black
Fits: Glocks Chambered In 9mm
DISCLAIMER: “Glock” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Using innovated polymer technology the magazines meet the requirements for three 922r compliant parts. Each magazine is built using Dupont composite/glass-filled polymer that is extremely durable, internally slick, and fast feeding to provide years of service. The slightly longer springs provide a more uniform pressure and are specially coated to provide smoother action along with resisting moisture.
Features and Specifications:
Manufacturer Number: SGMTMG17
SGM Tactical 9mm Magazine 17 Rounds For Glock 17 Polymer Black
Calilber: 9mm
Capacity: 17 Rounds
Body Material: Polymer With Heat Treated Metal Lining
Spring Material: Stainless Steel Spring
Follower Material: Polymer
Follower Color: Black
Easy to load
Drop Free
Heat treated continuous sheet, metal lining (1 piece lining)
All aftermarket base plates work
Lifetime Consumer direct warranty
Finish: Black
Fits: Glocks Chambered In 9mm
DISCLAIMER: “Glock” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
7 Ratings
"AGM Tactial" 9mm Lugar for "Glock 17"
Quality above average, metal parts inside. Will fit my AR-9 pistol and Carbine with "80 Percent" lower where cheaper magazines will not.
March 3, 2022
Very good quality Magazine.
Very well made mag. I loaded this mag 5 times ,and i have not had any issues so far. Seem like a reliable Magazine. Should of bought 4 of them.
October 23, 2020
good
these are the exact same as glock oem mags. they run just as well, they can take a beating, and they are 1/3 the price. they also have a extra panel on the front to mark them for whatever reason you would... Pros: as good as OEM
August 19, 2019
Excellent
Excellent buy Pros: Fall out of gun empty with no issues Cons: Should have bought 2x as many my first order
June 24, 2019
They work.....great price
Good for range use
February 15, 2019
Good as Glock Mags
These mags are as good as Glock Mags I have bought 10 of these and not one has failed, 100%
February 7, 2019
Not one failure
I bought 5 of these mags and to test the I've only used one to shoot with I have over 5000 rounds through it without one malfunction I am completely confident in these mags at this point don't hesitate there good
May 5, 2018
Will it fit Fmk 9c G2?
Answer:
No it will not. I recommend item # 2-MGFMKM9C1M14.
Will this clip fit a Hi point 9mm C9 ?
Answer:
No it will not. I recommend item # 2-MGMKSCLP10C.
Will this magazine fit a Taurus G3?
Answer:
No it will not.
Does it fit Glock 30?
Answer:
No it will not.
Works with 9mm security?
Answer:
No it will not.
Will it fit a Girsan 9 mm
Answer:
You did not say which GiRSAN 9mm you have, but this magazine will not fit any GiRSAN pistol currently in production. If you need assistance selecting a magazine for your pistol you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
Will this fit a glock 22?
Answer:
No it will not.
Will this fit the Kriss Vector Gen 1 9mm?
Answer:
Yes
Will this fit 19x? Thanks
Answer:
Yes it will fit
Will this magazine fit a Tel Tec sub 2000
Answer:
Only if it has the adapter installed to take GLOCK magazines
Is this mag compatible with an fmp9(ar9)
Answer:
If it takes GLOCK magazines in 9mm it will
Will this fit gen 3?
Answer:
Yes it will.
Is this compatible for either left handed or right handed mag release on the firearm?
Answer:
It should fit both.
To verify, will this work on Glock G34 Generation 5
Answer:
Yes it will.
Will this fit a Ruger carbine 9mm ? Thanks
Answer:
It will fit current production PC Carbine models with the GLOCK magazine adapter installed.
Is this a side by side clip?
Answer:
This is a standard size double stack magazine for GLOCK 17 models.
Will these fit my gen.1 ,17
Answer:
Yes it will
Will this mag fit the Glock G45?
Answer:
Yes
Where is this made ?
Answer:
Korea
Will this clip fit my High Point 9mm
Answer:
No it will not.
Does this magazine fit a G17 Gen5?
Answer:
Yes.
Will these work with the Kel-tec Sub2000 that takes 9mm G17/G22 Magazines?
Answer:
Yes
Do these fit the polymer80 ?
Answer:
Yes, they do.
Do they fit the glock 17 gen 4?
Answer:
Yes, they do.
Will the 17 round mags fit in my Glock 19 like the Glock mags do? I'm assuming that they would
Answer:
Yes they would.
Will Taylor freelance magazine extentions work with these?
Answer:
No. Taylor Freelance extensions are designed to fit factory GLOCK magazines only.
Does this magazine have the round windows
Answer:
This magazine does have witness holes in the back, yes.