The RCBS Turret Press is a simple operation with no complex or automated processes. You have complete control over every reloading step. This press may be operated in progressive or single stage mode. In the progressive mode, output can be increased from 50 to 200 rounds per hour. Or, if preferred, the press can be used as a single stage press and load cases in the batch mode.

Features and Specifications:
Manufacturer Number: 88901
Simple operation no complex or automated processes
You have complete control over every reloading step
May be operated in progressive or single stage mode
In the progressive mode, output can be increased from 50 to 200 rounds per hour
The press can be used as a single stage press and load cases in the batch mode
Rugged, cast iron frame, toggle block and turret head
Heavy duty construction to minimize springing
Detent on Turret Head for positive alignment
Standard 7/8"-14 threads for most popular reloading dies and accessories
Six Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time
Turret Head held in place by one bolt for quick, easy changeovers
Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left hand use
Standard Shell Holders slip into press ram and are securely held in place by a clip spring
Primer Plugs and Sleeves are supplied for seating large and small primers
Primers are seated away from stacked primers
Safety tube included
The Primer Catcher eliminates spent primers on floor
Snaps off for easy emptying
Baked epoxy finish for quick, easy cleaning, chip and fade resistant

The Heavy duty construction minimizes springing, and the detent on the turret head is for positive alignment. Standard 7/8"-14 threads for most popular reloading dies and accessories. Six Station Turret Head allows many combinations in the mounting sequence of dies and powder measure permits two or more calibers to be set up at the same time.

Turret Head held in place by one bolt for quick, easy changeovers. Turret Pin Assembly (provided for turret head removal and installation) and Ball Handle Assembly may be positioned for right or left hand use. Standard Shell Holders slip into press ram and are securely held in place by a clip spring. Primer Plugs and Sleeves are supplied for seating large and small primers. Primers are seated away from stacked primers. Safety tube included. The Primer Catcher eliminates spent primers on floor snaps off for easy emptying. Baked epoxy finish for quick, easy cleaning, chip and fade resistant.