Purchased two of these. Only tried one. This magazine will not reliably feed. I tried it with round nose and hollow point rounds. Pull slide back and lock, press slide release and it will jam. Round will not chamber. Every single time. If it will not cycle cold it will not be reliable when fired. I ordered a magazine for a 92FS and it was unusable for a different reason. I do not recommend buying ProMag magazines.
CTD was very good and provided a prompt refund. Will certainly buy from CTD again but will not buy another ProMag magazine.
Year after year, ProMag has increasingly become one of the leading manufacturers of firearms magazines in the world. Gun enthusiasts and law enforcement personnel have agreed, be it for recreational "plinking", competition shooting, or law enforcement, Promag is the source you can count on.
This is a ProMag double-stack 15 Round magazine for the Walther P99 series of pistols in 9mm. Constructed from heat-treated blued-steel, with a follower, lock-plate, and base-plate molded from a proprietary DuPont Zytel based black polymer. Expertly machined for exceptional quality and guaranteed to feed and function for every shot. ProMag magazines include a lifetime guarantee, if you ever have a problem with their magazines; simply return them to ProMag for replacement.
Features and Specifications:
Manufacturer Number: WAL-A2
ProMag Walther P99 Magazine
Caliber: 9mm Luger
Capacity: 15 Rounds
Body Material: Heat Treated Steel
Spring Material: Chrome Silicon Wire
Follower Material: Dupont Zytel Polymer
Baseplate Material: Dupont Zytel Polymer
Lifetime Warranty
Made in the U.S.A.
Finish: Blued
Fits:
Walther P99
Do not recommend
March 27, 2026
They work great.
May 17, 2022
Fits my PPQ M1
I was looking for some additional PPQ M1 mags and they appear to be sold out everywhere. I did some research about the P99 mags working with the PPQ M1 so I gave this a shot. I had no problems loading it into my ppq m1. I haven't fired it yet to test it, but I would assume since the mag fits my ppq m1 and ejects normally, it should have no problem firing and cycling when fired. with the discontinuation of the ppq m1 line, I might need to buy a couple more of these.
May 3, 2021
Work on PPQ M1 toi
Feed, fire and slide lock back just like factory magazines. Slide also slams home when inserted with force. Can actually squeeze 16 rounds in them with slide open so you can close the slide and have the full 15 in the mag and 1 in the chamber.
August 13, 2018
Very well made and work p
Very well made and work perfectly with my Walther P99 AS. I have purchased 3 and all worked perfectly, I look forward to purchasing more.
February 5, 2017
I purchase 3 for my Walth
I purchase 3 for my Walther P99 and they work perfectly. I will purchase more!
January 28, 2017
These work in my PPQ M1 a
These work in my PPQ M1 and with a small cut they also work in my wife's PPQ M2.
March 30, 2014
Seems like a nice magazin
Seems like a nice magazine, but will not seat in the ppq m2. Make sure to buy this only if you have the older version with the non button mag release.
June 14, 2013
...I had receved the P99
...I had receved the P99 mags I ordered, and read the revue of the slide not holding open on the last shot. I Have two ProMag AR15 mags that do just that-the slide will not lock on an empty mag. When I took the P99 mags out of their packages I tried them out, and sure enough, the slide would not lock. I looked at the mags and seen that the mag follower against the original mag for my Magnum Research MR Eagle and the follower on the ProMag was just a little shorter than the factory model. I looked around my junk mag box and found three ProMag mags for a SIG P228 I owned a few years ago, and seen where the followers matched the correct size of the original mags. I swaped out the followers and the slide locks back on an empty chamber! So, if anyone out there is having trouble with the mags, look into the follower that assists in locking the slide, and ether order factory parts or, get some ProMags for a SIG P228 and MacGuiver it as I did!
April 7, 2013
I bought two. Current pic
I bought two. Current picture on CTD is misleading. It shows a factory mag but the Promags are smooth sided and the base plates are smaller. That said the order came quickly and they seem to work and function well.
March 18, 2013
Will these fit a PDP?
Answer:
No this will not fit. I recommend item # 2-MGWA2856891.