ProMag manufactures quality parts and accessories for a variety of firearm platforms and their products are used by enthusiasts across the country. Shooters have found their items to be effective and one of the best bangs for your buck on the market. This aftermarket 14 round magazine is compatible with the Para Ordnance P14, P13, P12, and P10 Warthog pistols chambered in .45 ACP. Perfect as a spare on the range or to replace a factory unit, its steel body is heat treated and features a black oxide finish to handle rigorous training conditions. Internally ProMag selected a heat treated chrome silicon spring with an injection molded follower to ensure consistent performance for a lifetime of use. Speaking of lifetimes, every mag they produce includes a warranty to protect against any manufacturer defects. Pick up an American made magazine and head to the range with your beloved Para Ordnance handgun.
Features and Specifications:
Manufacturer Number: PAR-A1
Fits: Para Ordnance P14, P13, P12, & P10 Warthog
Caliber: .45 ACP
Capacity: 14 Rounds
Body: Heat Treated Steel
Follower: Injection Molded Polymer
Spring: Heat Treated Chrome Silicon
Baseplate: Polymer
Finish: Black Oxide
Lifetime Warranty
Made in USA
Features and Specifications:
Manufacturer Number: PAR-A1
Fits: Para Ordnance P14, P13, P12, & P10 Warthog
Caliber: .45 ACP
Capacity: 14 Rounds
Body: Heat Treated Steel
Follower: Injection Molded Polymer
Spring: Heat Treated Chrome Silicon
Baseplate: Polymer
Finish: Black Oxide
Lifetime Warranty
Made in USA
Will not fit Rock Island BBR 3.10
Looks fine, but does not fit the Rock Island BBR 3.10 (will not lock in) without modification.
February 11, 2023
Took quite a bit time to file fit these mags to get inserted proper fit & function ,
Required hand fitting , at location of mag real ease . Then upper mag was over size , hand fitting was also needed . Only holds 12 max in capacity instead of 14 ,
December 20, 2022
does not eject properly in my American classic 3011
Would not eject the magazine properly in my gun .
April 7, 2019
The product I received was exactly as I ordered
I received my Para .45 mags in the mail and they fit perfect exactly what I wanted. Tried them out with no flaws, I definitely will be shopping at Cheaper than dirt for all my handguns and rifles.
May 20, 2018
Just plain didn't fit. It
Just plain didn't fit. It looks the same but it's too tight to fit into the magwell.
April 18, 2012
The only problem I have h
The only problem I have had with these mags is that when fully loaded with 14 rounds, they are hard to seat fully in the magwell when the slide is forward. However, I have no problem seating them with the slide locked back and have had zero problems with feed, fit, ability to fall freely from the gun when the mag release is pressed, or anything else. I highly recommend these and will be buying more.
November 18, 2011
I bought 3 of these. None
I bought 3 of these. None of them hold the slide back with the last round. The Mec-Gar brand worked flawless. Don't waste your hard earned money on ProMag products. I have 15 ProMag magazines for several of my weapons. Only 2 of the 15 work as they should.
November 6, 2011
I bought two of these and
I bought two of these and It would not fit in my para 14-45 had to grind the base plate to get it to work. It also would not load the last round.
October 22, 2011
Ordered three of these fo
Ordered three of these for my Para Hi-Cap LDA. Exactly the same as the factory mag, only black. They fit perfectly and fed smooth. At half the price of the Para brand mags, you really can't go wrong!
September 16, 2011
I bought two of these awh
I bought two of these awhile back, they fed okay but realized the plastic follower was the culprit for all the substandard performance. I disassembled the mags and used a fine file and dressed down the circumference area of the follower only slightly. I reassembled and loaded all 14 rounds in with wolf ammo no less and didn't have a single malfunction in either magazine. When the slide locked open, the latch was all the way up into the slide recess. I'm now very satified with the product. Remember to always disasseble any mag every now and then to clean and dry lubricate them. If you don't, any mag can fail you. I give it a three bullet rating just due to the fact that it didn' t come to me with life for death reliability.
September 5, 2009
will this fit a ATI FATBOY LW .45 DOUBLE STACK
Answer:
No sir, sorry!
Will this fit a Rock Island M1911 A2-FS
Answer:
Hi Trip! The manufacturer only specifies this magazine for Para-Ordnance P14, P13, P12, and P10 Warthog .45 ACP pistols.
Will this fit Springfield 1911 LDD (PX9109L)?
Answer:
No this will not fit. Try item # MAG-234-001 or MAG-283 or 44710 or 2-MGEB848.
will this mag fit a LLama 45 Cal 1911 ?
Answer:
No this will not fit. If you have a full size single-stack 1911, try item # 2-MCGCG4507B or 20-MGCG4508BPF.
Will this fit in a para pro custom?
Answer:
No this will not fit. Try item # MAG-428-083. Please note, you may need to remove the slip over grip sleeve and this may extend past the bottom of your magazine well.
will this fit the para warthog?
Answer:
Yes it will.
Will it fit a Remington R1 Enhanced 1911 double stack?
Answer:
No it will not.