Designed for comfort, control and superior weapon retention. Constructed of high-strength carbon fiber filled polymer. Ambidextrous gooseneck-style stock with palm swell. Click-adjustable cheek-riser and length-of-pull. Front and rear quick detach style flush cups. Secure grip storage compartment. Includes one 10 round magazine with 5 round follower. Includes extended mag release. Pre-inletted for a Timney Trigger. Soft rubber recoil pad - contoured and textured for superior comfort. 3.8 pounds.
5 Ratings
I would recommend this to any FN Herstal Mauser 98 owner
With just a dash of assistance from a rubber mallet, this fit my FN Mauser 98 perfectly! I had been looking for a good, ergonomic stock for this gun for years, that didn't cost what a custom stock would cost and I found it with this stock. It took only about 10 minutes and just a dash of coercion from a rubber mallet for this to fit nice and tight on my Mauser action. Having an adjustable cheek riser/rest makes this stock just about perfect for what I am trying to do with this Mauser action and that is to make it into a reliable longer distance shooting rifle. I am hoping, with a bit of smithing, I can get this rifle to shoot out to about 600 to 800 meters. We'll see. The scope and mounting are next. For the price of this stock, you cannot beat what you get to turn your old Mauser into an up to date rifle.
July 24, 2018
nice stock
I used this stock on a Chilean mauser I had rebarelled to 308. I had to fit the barrel channel quite a bit but it worked out nice. I love the adjustments and the large magazine. Looks nice too. Pros: Solid and stiff Cons: Heavy / Bulky
January 9, 2018
Put on an Yugo M48A that
Put on an Yugo M48A that the wooden stock was rotten. Manageable recoil and the adjustable cheek makes it nice for my scope which sits a few inches higher. The including 10 round magazine is nice while at the range and beats loading the rounds in one by one.
December 26, 2016
I used this for a Yugo m4
I used this for a Yugo m48. Some fitting is required. The interior hole on the front action screw grommet is way too small. That should have been sized right from the factory.
November 5, 2016
Just got this stock for m
Just got this stock for my 1944 model 98 german mauser. In a word, awesome. Fit like a glove, easy installation. I used a timney trigger with it, with no modification. Installing a bipod was also easy, just look had to look up video on youtube because didn't specify in instructions where to drill hole. I can't stop looking at it. Great product!
September 2, 2016
Will this fit the Czechoslovakian- VZ24 model small ring mauser that's based off of the 98K?
Answer:
No. Per the written description: Fits: Most large ring Mauser military rifles
Will this fit an FN 1952 Mauser 30-06?
Answer:
Yes this should fit. Some fitting may be required.
Does it have scope mount accommodation?
Answer:
It does not include a scope mount, however, you will still be able to mount a scope to the action.
Will this work for a browning FN Safari that has the Mauser action?
Answer:
Yes the screw patterns are compatible and this stock should fit.
Will this fit a German 1917?
Answer:
Per the written description: Fits: Most large ring Mauser military rifles
Will this fit argentine 1909 mauser?
Answer:
Yes it should fit
will it fit a 308/7.62X51 MODEL 1916 SPANISH MAUSER
Answer:
It should fit most large ring Mausers
will this fit the Mauser 1895 - Deutsche Waffen - Chileno Modelo - Berlin - 308win?
Answer:
It will fit most large ring Mauser military rifles, minor fitting may be required.
will straight bolt work with this by the picture the bold is curved?
Answer:
The straight bolt will fit also.
Will this stock fit the 7mm Mauser?
Answer:
This will fit many rifles chambered in 7mm Mauser, but not all of them.
Can it be suitable for k96 Carl Gustav? 6.5mm Bullet?
Answer:
No. This will not fit small-ring Mausers like the Swedish m/96
Will this fit a Dumoulin FN large ring action? Also, what size barrel is the barrel channel inlet from factory?
Answer:
The stock will accept up-to a 1" bull barrel
Will this work with an Persian k98 carbine?
Answer:
Yes, it should.
How do I know if it will fit a 1938 Radom Mauser?
Answer:
Assuming it is a Wz.1929, this stock should fit.
Will this fit the M48 Turkish mauser?
Answer:
Yes it will.
Will This fit a CZ 98 Mauser 8mm?
Answer:
Probably. The 98 should be a large ring model, and this stock fits most large ring Mausers.
Will this fit an Argentine 1891 Mauser?
Answer:
No, it will not fit.
will this stock work with my 1916 Gerwher 98
Answer:
Yes it will.
Will this stock fit a Brazil Mauser 08/34? Also, will it feed 30-06 rounds?
Answer:
The Archangel Mauser Precision Mauser Stock is compatible with large ring Mauser actions. I do not know if the magazine will feed 30-06, but they will fit in there.
Will this fit a large ring Mauser Brno VZ24 and will the magazine contain 30-06 rounds?
Answer:
The Archangel Mauser Precision Mauser Stock is compatible with large ring Mauser actions. I do not know if the magazine will feed 30-06, but they will fit in there.
What is the max COL for the magazines?
Answer:
The magazine for the ProMag, Archangel Mauser Precision Stock will accept 8mm Mauser ammunition with a max cartridge overall length of 3.325 inches.
Will this fit the m38 6.5x55 Mauser?
Answer:
No. The M38 is a small-ring Mauser.
What is the shortest possible LOP?
Answer:
This stock has an adjustable LOP from 13.5"-14.6" inches.
I have an FN Herstal Mauser will the Archangel stock fit it?
Answer:
It might. FN made small and large ring Mausers. If yours is large ring it should fit.
will this fit a Mauser M67 F2 .308?
Answer:
Yes it will.
will this fit a 1893 Turkish mauser
Answer:
No. This stock will fit a 1903, 1938, 03/38 and 38/46. The 1893 is a "small ring" and will not fit this stock.