The Poly Planar Bluetooth Wireless Marine Grade Amplifier with Waterproof Control Pad is an excellent choice for use in any marine environment, or your personal spa/sauna. The unit accepts either audio streamed via Bluetooth connection or hard wired input via RCA input. The waterproof control pad is easily mounted as the body of the keypad is threaded and the large mounting nut is tightened against the back side of the mounting surface. Keep the party going with the Poly Planar Bluetooth Wireless Marine Grade Amplifier with Waterproof Control Pad.

Specifications and Features:
Powers up to (8) 4ohm speakers
Internal distortion limiting circuits
Dedicated Subwoofer gain level control
External waterproof control pad included
Water resistant design for spa or marine use
Rear channels switchable from full range to powered sub out
Speaker Impedance 2-8 ohm
Output Power:
(2 ohm load) 30 Watts RMS per Channel (70W Peak)
(4 ohm load) 20 Watts RMS per Channel (50W Peak)
Frequency Response 20Hz-40kHz
Low Pass Crossover 18 - 245 Hz
Operating Voltage 13.8V DC (10V-16V)
Maximum Current Draw (full power) 5-8 amps
Amp Dimensions 8.4" x 4.2" x 1.4"
Installation Clearance 250mm free space top/sides
Weight 1.5lbs
Control pad Cable Length 20 feet
Four channel, 120 Watts RMS Bluetooth wireless audio amplifier capable of delivering up to 30W RMS per channel
Compact, water resistant design that allows for flexible mounting possibilities
Control keypad is designed to withstand installation in the gas zone of a portable spa and is equally suited for use in a marine environment
Unit accepts either audio streamed via Bluetooth connection or hard wired input via RCA input

Usage:
Add up to four loudspeakers or two popup speakers and a subwoofer to a portable spa
As a stand-alone system amplifier for any audio source - ideal for small watercraft/ATV's/golf carts