Pearce Grip Extension for Glock 36 Plus Zero Polymer Black PG360 [FC-605849200453]

Pearce Grip Extension for Glock 36 Plus Zero Polymer Black PG360 [FC-605849200453]

nan PG36

Out of stock

nan PG36

Model
PG36
UPC Barcode
605849200453
Pearce Grip is a company based in Texas producing the highest quality grips available in the USA. They specialize in replacement grips for your firearm and are expanding their offerings to ensure they have what you want and need. Their products are sought after world wide because of their functionality and rugged dependability. In an age when things are mass produced over seas, it is comforting knowing that Pearce products are manufactured in the USA.

Specifications and Features:
Does not alter the capacity of the magazine
These units replace the magazine base plate and retain all other factory components
Provides 1/2" additional length for better control and comfort
These units blend with the contours and texture of the handgun giving a factory appearance
They are made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F

Fits:
Glock 36




DISCLAIMER: “Glock” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
10 Ratings
5 out of 5 stars
10 Ratings

Rated 5 stars by 100% of reviewers

Rated 4 stars by 0% of reviewers

Rated 3 stars by 0% of reviewers

Rated 2 stars by 0% of reviewers

Rated 1 star by 0% of reviewers

Rated 5 out of 5
Good item!
Perfect, it really does give you the extra bite you need on this gun!
January 18, 2023
Rated 5 out of 5
Great for big hands and Glock 36
The grip extension gives your pinkie finger just enough real estate to have a comfortable grip. I have large hands and this extension allows me to get a firm grip and not have my small finger hanging off when holding my Glock 36. Excellent product.
October 9, 2021
Rated 5 out of 5
Pearce +0 mag extension
I'm an instructor and carry a Glock 36. Every time I shot the gun with the standard magazine, I pinched my little finger, leaving a large blood blister. After installing the Pearce +0 extension, I shot 50-60 rounds without discomfort or a blister. They're challenging to install, but that's Glock's design, not Pearce's. Once you learn the trick, it's easy, though. Pros: Absolutely recommended to prevent pinching Cons: Difficult to remove the stock base.
November 5, 2017
Rated 5 out of 5
Luv the Glock 36 for ccw
Luv the Glock 36 for ccw but, my hands are a bit large for the small powerhouse. This extension doesn't add any additional rounds to your mag however, it also doesn't change yours factory spring dynamics either. A simple small Phillips screw driver in lieu of the the the Glock tool inserted into the tab hole, shoving the spring plate out of the way and with a small pinch at the mid section mag tabs will allow you to use your tool for the proper leverage to remove the old mag bottom. The new mag ext simply slips on and voila, you now have a new grip when introduced to your sidearm. It also doesn't add squat to your print signature either. It was suggested to touch the sides of the sharp corners with a file (round off) in order to reduce recoil bite but, as-is, it doesn't seem to bother me. Great item!!!!!
January 9, 2014
Rated 5 out of 5
I just installed this lit
I just installed this little gem on all of my magazines for my 36, and it feels so comfortable, without adding to the length of the grip in any real manner. I definitely recommend this upgrade for 36 owners. It's a little gun with a big recoil, and you need the extra grip.
April 7, 2011
Rated 5 out of 5
I highly recommend this f
I highly recommend this for G36 owners! This little base makes a world of difference. All my G36 mags have this grip extension on them.
January 12, 2011
Rated 5 out of 5
This really helped improv
This really helped improve my handling on my Glock 36. I have big hands, and that extra finger groove made it a lot easier to point the pistol on center, and keep a firm, steady grip. The best part is that it is only slightly larger that the factory floor plate (at the front the finger groove is maybe 1/8' taller- the height of the plate at the rear is almost identical to factory), so you are not really giving concealabilty up like you might with the +1.You might want to keep one mag 'factory' for max concealabilty, but really, you give up very little and get a lot by adding this accessory! A tip for R&R- use a small screwdriver to loosen the factory floor plate at the sides by twisting them loose. There are two notches there near the center that a pocket screwdriver will fit right into. After that, you can depress the floor plate button, and wiggle it off. If you forget to loosen the sides, you will unnecessarily frustrate yourself!
July 4, 2010
Rated 5 out of 5
This magazine extender is
This magazine extender is much better than the stock Glock mag base. You achieve better control with your small finger resting comfortably on the extender and the extender also gives you just enough additional room so as not to jam your middle finger knuckle into the trigger guard when gripping the weapon. Does not seem like a big deal until you run 150 rounds through the weapon breaking it in. I also like to shoot my personal carry weapon often to increase proficiency. A comfortable session with a .45 is a huge plus. The extender also looks much better, actually appears to be more of a stock extender than an after market. Double thumbs up!!
January 22, 2010
Rated 5 out of 5
works as described. to re
works as described. to remove stock clip bottom, you really have to squeeze the sides.
November 22, 2009
Rated 5 out of 5
This works as described.
This works as described. It is just a little bit bigger, but makes a world of difference in control. A little difficult to install. I would have liked it better if it was actually made by Glock. Other than this and trijicon sights, it is completely stock.
July 10, 2009