Pearce Grip is a company based in Texas producing the highest quality grips available in the USA. They specialize in replacement grips for your firearm and are expanding their offerings to ensure they have what you want and need. Their products are sought after worldwide because of their functionality and rugged dependability. In an age when things are mass produced overseas, it is comforting knowing that Pearce products are manufactured in the USA. These units replace the magazine base plate and retain all other factory components. They do not alter the capacity of the magazine. These units will add 1/2" additional length for better control and comfort.
Features and Specifications:
This is not a Glock Factory Product, it is an aftermarket Product
Manufacturer Number: PG-29
Blend with the contours and texture of the handgun giving a factory appearance
Made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F
Provide comfort without increasing the length of the grip over stock dimensions
Provide an easier means of manually extracting the magazines
Will not alter the capacity of the magazine
Black
Fits:
Glock 29
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
DISCLAIMER: "Glock" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Features and Specifications:
This is not a Glock Factory Product, it is an aftermarket Product
Manufacturer Number: PG-29
Blend with the contours and texture of the handgun giving a factory appearance
Made from High Impact Polymer and withstand drop tests at temperatures from -20 F to 350 F
Provide comfort without increasing the length of the grip over stock dimensions
Provide an easier means of manually extracting the magazines
Will not alter the capacity of the magazine
Black
Fits:
Glock 29
Note: This product is new and being closed out; sold "As Is" and is not returnable to Cheaper Than Dirt. Please contact the manufacturer for warranty and assistance.
DISCLAIMER: "Glock" is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of "Glock" on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
Way better grip
These are great. Love the gun, but my pinky had no where to go. I get a waaaaay better grip on the pistol now, and that’s better for shooting 10mm
April 4, 2022
For G29, don't buy Pearce extensions
The problem is not so much with the Pearce design as the fact that not all Glock frames and magazine Wells are equal. On the G29, the part of the grip frame that equates to a front strap doesn't overhang the floorplate of the magazine like it does on some Glocks. Therefore, the sharp upper edge on the Pearce extension for a G29 will pinch, cut, or abrade your pinky severely. They may work OK on Glocks where the grip frame overhangs the magazine baseplate. I had six of these on G29 mags and removed them all. Again, the negative review is only for models where the Glock frame doesn't cover the gap between frame and mag baseplate.
April 4, 2019
Glock misses out on this design
These are easy to install. I actually matches the glock 29 SF design as if it were made by Glock. Why won't Glock design their default mags for compact/subcompact this way? Anyway, looks, functions and perfectly fit. Pros: It matches perfectly on my Glock 29 SF Cons: None
January 21, 2019
Works great, great price
Works great, great price too. These really seem like OEM parts from GLOCK. I'm still surprised they haven't started making these yet. If you own a small GLOCK buy these for your corresponding model.
May 1, 2014
These are what turn a goo
These are what turn a good gun into a great gun. They look factory and the feel is much better than the mag extension on the model 30. A little hard to install , some instructions from Pearce would have been helpful , but that does not take away from the fit and quality.
December 6, 2013
Installed these on all of
Installed these on all of my G29 mags. I find the 'two finger' grip on the subcompact GLOCKs awkward, so much so that I didn't want to own one. I was looking at the midsize offerings at the local gun store, talking to the Guy that owned it, when he said 'hold on, I think you'll like this.' He goes to the back, rummages around a bit, and comes back with a mag fitted with this plate, throws it in a 29, and hands it to me. Perfection embodied. I have mid sized hands, and this configuration was PERFECT for me. JUST big enough to get a good full hand grip on, still the small concealable package I was looking for. I cannot recommend these base plates high enough.
February 6, 2013
Put these on my two G29 m
Put these on my two G29 magazines tonight. They definitely look OEM. Fit and finish could not be better. I have pretty large hands and it's still a tight squeeze to get my pinky secured around the extension. I've not yet shot the weapon with this modification so I can't say how much it will help in that regard. However, it helps a great deal in drawing the weapon from my Fobus holster and would highly recommend it from that standpoint alone. If my hand width was about 3/8' less, I would have given these 5 bullets.
January 3, 2013
With the grip extension I
With the grip extension I am now able to fully grip my glock 29. I would recommend this to anyone.
February 22, 2011
With the grip extension I
With the grip extension I am now able to fully grip my glock 29. I would recommend this to anyone.
February 22, 2011
These do exactly what the
These do exactly what they say they will do, add more room to hold on to your sub compact Glock 29 for better control.
January 9, 2011