Para-Ordnance 1911 SS Laser Sight Warranty [FC-798816191172]

Para-Ordnance 1911 SS Laser Sight Warranty [FC-798816191172]

Lasermax


Out of Stock

Don't forget to send in your  Firearms Sales Form [PDF]  or  Select FFL Dealer

Lasermax

UPC
798816191172
SKU
38490
Top of the line. Extremely rugged, lightweight and completely internal. Widely adopted by SWAT, Special Forces, federal agencies, Presidential Security Services, and many other top tier forces. Also available to civilians for personal protection.

Completely internal! Keep your holster, keep your tactical lights, and keep your favorite grips.

Extremely rugged. LaserMax internal guide rods meet or exceed both Mil-Spec and Homeland Security durability test standards including drop tests, blowing sand, temperature and humidity extremes, salt water fog, deep water immersion, 20,000+ rounds live fire.

Installation takes minutes. If you can field-strip your gun, you can install your LaserMax sight. No gunsmithing required.

Alignment. The Internal Guide Rod lasers come permanently aligned from the factory for center-of-mass accuracy at 20 yards. It will never drift out of alignment. There is no need to re-zero after changing batteries.

Accuracy. As close to the bore of the firearm as possible, positioning allows for the closest and most consistent relationship between your point of aim and point of impact (POA/POI) over all shooting distances. Especially useful for moving targets.

Turn it on! Ambidextrous switch in custom take-down lever. Deliberate on/off activation-highly desirable in a tactical or personal defense situation!

Batteries Powered by watch or hearing aid batteries, easily found in grocery, pharmacy and electronics stores. Also available from CTD!

Specifications and features:
Fits Para-Ordnance 1911 stainless steel finish
635nm red-orange laser
3mW power output
+/-2" point of aim at 20 yds.
5/16" spot at 7 yds.
3/4" spot at 25 yds.
Up to 20 yds. effective range
Visible range up to 1,000'
Class IIIa laser
Built-in ambidextrous switch
Glass lens
Internal guide-rod laser design
Self-aligning
Weather-resistant
15 deg. F to 120 deg. F operating temperature
Uses a silver oxide battery
0.5 to 3 hrs. continuous use
Steel & polymer construction
Replaces existing rod & spring
Easy to install
Made in the USA
3-year warranty

For warranty issues, contact 1-800-527-3703
Top of the line. Extremely rugged, lightweight and completely internal. Widely adopted by SWAT, Special Forces, federal agencies, Presidential Security Services, and many other top tier forces. Also available to civilians for personal protection.

Completely internal! Keep your holster, keep your tactical lights, and keep your favorite grips.

Extremely rugged. LaserMax internal guide rods meet or exceed both Mil-Spec and Homeland Security durability test standards including drop tests, blowing sand, temperature and humidity extremes, salt water fog, deep water immersion, 20,000+ rounds live fire.

Installation takes minutes. If you can field-strip your gun, you can install your LaserMax sight. No gunsmithing required.

Alignment. The Internal Guide Rod lasers come permanently aligned from the factory for center-of-mass accuracy at 20 yards. It will never drift out of alignment. There is no need to re-zero after changing batteries.

Accuracy. As close to the bore of the firearm as possible, positioning allows for the closest and most consistent relationship between your point of aim and point of impact (POA/POI) over all shooting distances. Especially useful for moving targets.

Turn it on! Ambidextrous switch in custom take-down lever. Deliberate on/off activation-highly desirable in a tactical or personal defense situation!

Batteries Powered by watch or hearing aid batteries, easily found in grocery, pharmacy and electronics stores. Also available from CTD!

Specifications and features:
Fits Para-Ordnance 1911 stainless steel finish
635nm red-orange laser
3mW power output
+/-2" point of aim at 20 yds.
5/16" spot at 7 yds.
3/4" spot at 25 yds.
Up to 20 yds. effective range
Visible range up to 1,000'
Class IIIa laser
Built-in ambidextrous switch
Glass lens
Internal guide-rod laser design
Self-aligning
Weather-resistant
15 deg. F to 120 deg. F operating temperature
Uses a silver oxide battery
0.5 to 3 hrs. continuous use
Steel & polymer construction
Replaces existing rod & spring
Easy to install
Made in the USA
3-year warranty

For warranty issues, contact 1-800-527-3703
Product added to cart
Product added to cart
We are unable to fulfill the total quantity that you have requested. Please review the adjusted available quantity.

Recommended for you