Planning an AR-15 build in .22 Nosler? Odin Works has the barrel you need! This 18" Designated Marksman Rifle (DMR) heavy profile (.850 behind the gas block, .745 in front) is made from 416R stainless steel. It features button rifling, is hand lapped and has M4 feed ramps. The gas system is rifle length, and Odin includes a tunable gas block. Muzzle threads are 1/2x28. Odin Works guarantees 1 MOA accuracy with this barrel.
Specifications and Features
.22 Nosler
416R stainless steel
18" DMR heavy profile barrel
Rifle length gas system
Hand lapped
M4 feed ramps
SAAMI spec chamber
Muzzle threads 1/2x28 TPI
Weight 2lbs 8oz
1 MOA guaranteed
Includes:
Tunable gas block
Fits:AR-15 upper receivers
Note: This product is not returnable. Contact the manufacturer for warranty and assistance.
Specifications and Features
.22 Nosler
416R stainless steel
18" DMR heavy profile barrel
Rifle length gas system
Hand lapped
M4 feed ramps
SAAMI spec chamber
Muzzle threads 1/2x28 TPI
Weight 2lbs 8oz
1 MOA guaranteed
Includes:
Tunable gas block
Fits:
Note: This product is not returnable. Contact the manufacturer for warranty and assistance.
1 Rating
Buy This!
This barrel shoots. If you are looking to build a 22 Nosler this is what you need. I know. I started with a less expensive barrel from someone else. Couldn't get it to shoot. handloads or factory ammo. 1 1/2 inch groups was about it. Bought this barrel installed it. First set of handloads was 7 three shot groups with an overall grouping of under .600. You cant beat this barrel. Wish i would have bought it from the start.
August 22, 2017