If you have been looking to convert your old, reliable Remington 870 field shotgun into a home defense model, then this is the part you need. This aftermarket Mossberg built Remington 870 replacement barrel is the perfect addition to your collection. This barrel features a fixed Cylinder constriction and a smooth bore perfect for Buckshot, Birdshot and rifled slugs. The barrel is 18.5" long and features a bead front sight.
Features and Specifications:
Manufacturer Number: 91335
12 Gauge
18.5" Length
3" Chamber
Smooth Cylinder Bore
Bead Sight
Matte Blued
Note: This barrel is not threaded to accept chokes, it is fixed at the Cylinder constriction rate.
Fits:
Remington 870
Note: This product is not returnable to Cheaper Than Dirt. Please the manufacturer for warranty and assistance.
Features and Specifications:
Manufacturer Number: 91335
12 Gauge
18.5" Length
3" Chamber
Smooth Cylinder Bore
Bead Sight
Matte Blued
Note: This barrel is not threaded to accept chokes, it is fixed at the Cylinder constriction rate.
Fits:
Remington 870
Note: This product is not returnable to Cheaper Than Dirt. Please the manufacturer for warranty and assistance.
21 Ratings
Highest quality replacement barrel available for your 870.
The fit and finish of this replacement barrel were outstanding. Lived up to and exceeded the quality I have come to expect from Mossberg over the years. Matte finish matched the original Remington 870 finish perfectly. Installation took about 2-3 minutes and fit/tolerances were tight. I’m glad to see that mossberg is making these replacement barrels, unfortunately Remington’s QC isn’t what it used to be, after all the buyouts.
March 29, 2024
Fits perfectly on my 870 express magnum
This barrel fits perfectly on Remington 870 12 gauge shotguns with factory 4 round magazine tubes. I was kind of skeptical about buying this online from specifications and reviews! But It fits perfectly on my 870 express magnum. Couldn't be happier.
December 19, 2019
Fit and Function issues
The finish on my barrel was perfect out of the box. I did however have two issues. The first was the mounting ring. Its about 1/8" to far forward preventing the mounting nut from tightening all the way down. I've fired the gun extensively and it doesn't appear to have caused an issue with safe operation. The second issue is that the barrel patterns extremely high, almost a foot high at 15 yards. I tried mounting it on 2 different 870's and had the exact same results from both. Im not sure if I the mounting ring has something to do with this or not. I may have just got one with a defect.
November 9, 2018
love this barrel
Great barrel. Much shorter than my factory.
May 10, 2018
Best buy. Buy this and don't look back
Couldn't have been better experience. Ordered on Sunday, delivered on Friday. Slight scratch/wear on side but perfect fit. Popped off the 28" modified and went from dove gun to "bump in the night gun" in about 45 seconds. I did remove the plug so I would have two more rounds in the mag, I live on a farm and five rounds of buckshot should handle most any problem I might ever have. Makes the old 870 easy to keep on the atv. Just good no frills upgrade to a 25 year old 870 Express. The matte finish even matched almost perfect.
April 19, 2018
Just what i was looking for
I was looking for an 18.5 inch barrel to replace the turkey barrel on my express magnum for home defense purposes, and this thing fit the bill nicely. The nice thing about it is that it takes about two and a half inches off the overall length, and it just looks nice on the gun anyway. There were a few scuff marks on the finish out of box, but in all honesty, i didn't buy my guns so they could look pretty in a cabinet, so i could care less. i was also pleasantly surprised when it showed up 2 days after placing the order, but i live in Oklahoma, so i shouldn't be too surprised. All in all, i am very pleased with this purchase.
May 6, 2017
Color matches original ba
Color matches original barrel and looks great. Shipping took 4 days. Was a bit dirty and had some marks on it when I got it but that's fine with me.
June 28, 2014
Good barrel, color matche
Good barrel, color matches, fit like the original. Wouldn't hesitate to buy another one.
May 15, 2014
The finish matches the gu
The finish matches the gun perfectly and functions great with the gun, so why 4 bullets? I was really hoping that the barrel was threaded and obviously it's not. I was hoping to be able to put a breaching tube on the end, but that's not going to happen unless I go to a gunsmith to have it threaded. But, that's just more money for something I don't really need but it would look awesome. I've already spent $400 on other parts for my 870. I guess I'll just settle for what I've got for now.
September 11, 2012
Could not be happier with
Could not be happier with the Remington 870 18.5' 12 gauge barrel by Mossberg. Fit and finish is as good as O.E.M. barrels, with absolutely no scratches. CTD impressed me with the fast shipping. 3 days - without having to pay for premium shipping - that is great. CTD has made one more new customer for life.
March 13, 2012
The first one I received
The first one I received had wear marks around the barrel. They replaced it for free, including shipping. If I didnt have to have mine replaced I would have given 5 bullets. Nonetheless it was great for the money. Fits great and looks great. Would recommend.
January 25, 2012
this barrel is well worth
this barrel is well worth the money, great fit and finish is a match to my 870 super mag. went from a bird killer, to a zombie killer!. only thing though there were a few little stratches but who cares it is a shotgun!
December 20, 2011
Was an exact fit for my E
Was an exact fit for my Express Magnum. Even the finish was a dead on match! Turned my 870 from a bird gun into a riot gun.
June 15, 2011
I got this for my home se
I got this for my home security gun. Installed on the 870 with ease, syntech stock, shell tube expander, and thats abit long, 3/4 inch longer than the Barrel but after I put on the muzzle brake, no problem in that area. I have yet fired it, but all the 12's, 16's so I have fired over the years, I'd expect abit of a hammering w/18.5 inches and cyl choke, but I'm not shooting birds with it as it is, maybe some skeet as it looks a bit like an old skeet gun I used to shoot, and if your gonna breaking at 3am be prepared for the worse reception you'd ever expect. I know I am a lot more at ease with it in tight spaces now more than before with a 30incher. Thanks CTD for a good product/deal.
April 29, 2010
I bought 2 of these at th
I bought 2 of these at the same time, one for me and one for a buddy, in order to save on shipping. Both barrels are perfect fit and match the 870 express matte finish exactlly. Cant loose with this one
January 31, 2010
I think this barrel is aw
I think this barrel is awesome. It works like a charm and fits really good. It scraches pretty easy but your not supposed to lay it on the ground any way right?:)
December 11, 2009
Great product for the pri
Great product for the price.Why pay more for the same product when this accomplishes the same thing? Extremely prompt shipment from Cheaper Than Dirt! Ordered and arrived 3 days later. So far have not been disappointed with any products or service from CTD!
September 18, 2009
Can't beat this barrel fo
Can't beat this barrel for the price. Fits perfectly and was easy to attach. Fits perfectly with my +2 magazine extension so now I can have 6 +1 shells in the shotgun and magazine extension is still an inch or so clear from the end of the barrel. If you are planning on adding a +2 magazine extension I would definately suggest this barrel over the 18' model. I am buying a second barrel for my dad right now. Thanks CTD.
July 9, 2009
Can't beat it for the pri
Can't beat it for the price. Fit perfectly in my 870 express magnum.
February 17, 2009
Remington 870 express:Thi
Remington 870 express:This is a good home defense barrel, especially when matched with a 7 shot magazine extender. A great substitute to spending $150+.
October 6, 2008
i got this barrel with my
i got this barrel with my folding butt stock and forearm, it looks great but does scratch really easy i had to reblue marks on it when i took it out of the package. my remington 870 express magnum with the stock folded is now the same length as the barrel alone that came with the gun. i can still add a 2 round magazine cap and be clear of the barrel. its a great buy, just watch out scratches on the barrel.
August 18, 2008
Is this a Full Choke? or Cyl Bore
Answer:
Per the written description: Smooth Cylinder Bore
Can you fire expandable slugs from this barrel ?
Answer:
Yes, as long as they are 12 gauge and have 2-3/4" or 3" shells you can.
Will this barrel fit a new Remington 870 fieldmaster?
Answer:
Yes this will fit.
This barrel fits on my mossberg 500?
Answer:
No. This is an aftermarket Remington 870 barrel made by Mossberg. It will not fit a Mossberg 500.
Will this work on a Remington 870 Express Magnum?
Answer:
Yes it will.
Will this barrel fit my 12 guage 2 3/4 " 870 Wingmaster made in the 60s
Answer:
Yes, however the finish may not match your firearm.
Will this barrel fit on a 870 SuperMag receiver?
Answer:
Yes, but you will not be able to use larger than 3" shells.
Is this barrel made in the USA?
Answer:
Yes, it is.
On an 870 express, will this barrel prevent me from adding a tube extension, for example, adding a +2 round extension?
Answer:
No, it will not.
Is it a smooth bore?
Answer:
Yes, it is smooth bore.
Is it 2 3/4" and 3" only with a magnum receiver or up to 3" with just an express reciever? Just wondering because I know there's a fine line, and I run 3" shells in my Express with the 28" factory barrel.
Answer:
2 3/4" or 3" with either receiver, as long as the shotgun originally accepted 3" shells.
Is the bead removal/replaceable? If so, what are the thread dimensions?
Answer:
The bead is removable. Mossberg has not published thread specifications.
the mfg # 90335 vs 91335 what is the difference??
Answer:
The difference is the finish, 90335 has a polished blued finish whereas 91335 has matte blued finish.
Will this barrel accept 2 3/4 inch shells?
Answer:
Yes. It can use 2.75" and 3" shells.