Mosin-Nagant 7.62x54R broken shell extractor is an essential tool to remove shells that are lodged in you Mosin. When the head is torn from the case leaving the majority of the shell casing inside the chamber of your weapon you will need a Broken Shell Extractor to safely remove it from the chamber. Keep one with your shooting gear, in your gunsmithing kit, or gun case. A handy, must have item for shooters and hunters.
Features and Specifications:
Manufacturer Number: SHELL
Shell Extractor
7.62x54R
Instructions for Use:
1. Insert the narrow end of BSE into the chamber with the casing stuck inside. Make sure that the inner pin is unscrewed so the end is not flared. (You will know what I mean when you see it)
2. Once the BSE is proplerly installed into the chamber you can release the bolt. Then you can pull the bolt back, by doing so it will pull the BSE back and and the end will flare and grab the case opening where the bullet was and pull it out like a regular loaded round.
Features and Specifications:
Manufacturer Number: SHELL
Shell Extractor
7.62x54R
Instructions for Use:
1. Insert the narrow end of BSE into the chamber with the casing stuck inside. Make sure that the inner pin is unscrewed so the end is not flared. (You will know what I mean when you see it)
2. Once the BSE is proplerly installed into the chamber you can release the bolt. Then you can pull the bolt back, by doing so it will pull the BSE back and and the end will flare and grab the case opening where the bullet was and pull it out like a regular loaded round.