If your AK-47, AK-74 or Saiga came without a scope mount, here is the part to fix that. With MI durability that will last as long as the rifle and quality that is backed up by a lifetime warranty from Midwest. So fix that AK-74, AK-47 or WASR that needs a scope or a red dot optic by having this MI installed on your Kalishnikov.
Specifications and Features:
Manufacturer Number: MI-AKSR
Machined from 4140 bar stock
Phosphate finish
Gunsmith install
Works on almost all AK pattern rifles
100% Made in USA
Lifetime Warranty
Specifications and Features:
Manufacturer Number: MI-AKSR
Machined from 4140 bar stock
Phosphate finish
Gunsmith install
Works on almost all AK pattern rifles
100% Made in USA
Lifetime Warranty
Will this fit vska?
Answer:
Yes this should fit, however, we recommend installation be done by a qualified gunsmith.
Hellpup?
Answer:
It should fit, however, we recommend installation be done by a qualified gunsmith.
Will this work on a milled receiver like the SLR-95?
Answer:
The manufacture states it will Work on almost all AK pattern rifles.
Does it work on Riley defense ?
Answer:
Yes it should. Minor fitting may be require.
Does it work on Riley defense ?
Answer:
Yes it should. Minor fitting may be require.
How do I know which rails will work with this mount?
Answer:
Standard Ak47 rails. Minor fitting may be required.
Will this fit a yugo m72-b1? Having a fun time finding parts for it. Also is there a bolt kit you can get for it to avoid the gunsmith? Thanks
Answer:
It should fit, we recommend installation be done by a qualified gunsmith
I'm assuming this will allow attachment of all Midwest Industries scope mounts?
Answer:
It will allow attachment of all Midwest scope mounts for AK's, yes.
Will this fit a pioneer JRA AKM?
Answer:
Yes it will, but you will need a gunsmith to install it and the rivets and bolts necessary to mount it.
I want to buy this side rail for my micro Draco from century arms what else do I have to buy to add a red dot sight
Answer:
You would also need a scope mount like item 2-MWMI-AKSM
Will this fit a Zastava M77 in .308? And if so, are any other parts needed?
Answer:
Yes it will work, but you will need rivets and/or bolts to install it.
Will this fit a bit century arms VSKA?
Answer:
Yes it will.
Will this fit romanian micro draco?
Answer:
Yes it will.
Will this fit a Century Ras 47?
Answer:
It could be installed, but the RAS47 already has a side rail.
Does it come with mounting hardware, ie screws etc.?
Answer:
No, it does not. This item is riveted to the receiver. Gunsmith installation is recommended.
Does it come with template so your elevations are not to far up or down
Answer:
No, it does not.
Will this fit io Inc ak 47 sporter stamped receiver And is there and exact fitment chart so the scope is not pointed up or down to much
Answer:
It will fit. Gunsmith installation is required.
Will this mount on an NDS-3?
Answer:
Yes.
Will this work on my Hungarian AMD65?
Answer:
Yes, but you might have to relocate the sling swivel.
will it fit a Century CV39 V2?
Answer:
No. You must use a Red Army Standard mount.
Will this fit my arsenal slr 106-21
Answer:
Yes.
Will this fit yugo pattern rifles? I have a century m70b1, fixed stock.
Answer:
Yes, the Midwest Industries Steel AK-47 Side Rail will fit Yugo model AK's with gunsmith installation.
Hello, I have a Feg SA85 AKM Ban era rifle will this fit it? I know that a Bulgarian and Romanian will not, as they do not reach the rear Trunion rivet or clear the trigger and hammer pins Thanks
Answer:
This rail will fit your SA-85M. This MI rail, and the Bulgarian and Romanian rails, do not use existing holes or rivets, but they require new holes to be drilled and rivets (or screws) to be installed.
Will this mount on a NDS 4 Ak 47
Answer:
It sounds like you have an built with a Nodak Spud NDS-4 receiver. The NDS-4 is an underfolder receiver. If you have an underfolder AK-47 you cannot fold the stock if you install a side rail.
Does it come with rivets to install it?
Answer:
No it does not.