The Midwest Industries AR-15 Low Profile Gas Block is constructed from 4140 steel and features a matte black finish. This particular low profile gas block will fit under most commercially available hand guards and secures to the barrel with the two included set screws. The additional length of 1.815" will cover the taper pin holes if you had to remove a FSB. Like with all Midwest Industries parts, this gas block is made right here in the USA by proud American's and is backed by Midwest Industries Lifetime Warranty.
Specifications and Features:
Midwest Industries MI-MCTAR-LPG.936
Low Profile Gas Block
.936" Diameter Gas Seat
1.815" Overall Length
Long enough to cover taper pin holes if FSB is removed
Low Profile Design will fit under most commercially available hand guards
Made from 4140 Steel
Secures with two set screws
Made in the USA
Matte Black
Fits:
AR15, M16, M4, M4A1 Barrel with a .936" Barrel/Gas Seat
Specifications and Features:
Midwest Industries MI-MCTAR-LPG.936
Low Profile Gas Block
.936" Diameter Gas Seat
1.815" Overall Length
Long enough to cover taper pin holes if FSB is removed
Low Profile Design will fit under most commercially available hand guards
Made from 4140 Steel
Secures with two set screws
Made in the USA
Matte Black
Fits:
AR15, M16, M4, M4A1 Barrel with a .936" Barrel/Gas Seat
Very good quality gas blo
Very good quality gas block, as expected from MI. Used this to fit under a free float tube. Fits very tight over the bull barrel I used this on. At first try at dry fitting , it appeared to be undersized. Few drops of oil and couple of twists back and forth and it slid right into place. Gas tube aligned correctly with my barrel nut, no issues.
January 1, 2017