Mec-Gar is the most trusted magazine manufacturer in the world with over 50 years of experience and over 100 MILLION manufactured for the world's largest firearm companies. Fine Italian craftsmanship is incorporated into every magazine they make. They monitor all variables during the manufacturing process to offer you the best magazines possible and reject any which don't meet their high standards of quality.
Features and Specifications:
Manufacturer Number: SRAI-ML3-3HBT-00
Mec-Gar Para Ordnance Magazine
Caliber: .45 ACP
Capacity: 14 Rounds
Body Material: Steel
Spring Material: Music wire
Follower Material: Polymer
Baseplate Material: Polymer
Heat-treated housing
Corrosion resistant
Finish: Black Anti Friction Coating
Fits:
Para Ordnance P14
Features and Specifications:
Manufacturer Number: SRAI-ML3-3HBT-00
Mec-Gar Para Ordnance Magazine
Caliber: .45 ACP
Capacity: 14 Rounds
Body Material: Steel
Spring Material: Music wire
Follower Material: Polymer
Baseplate Material: Polymer
Heat-treated housing
Corrosion resistant
Finish: Black Anti Friction Coating
Fits:
Para Ordnance P14
Good magazines for rare guns.
Good magazines, the fit the rock island 1911a2 and 2011s well. I recently bought more due to my older ones being worn out after 5+ years of heavy usage. Definitely worth it!
July 22, 2024
Fits the Rock Island BBR 3.10
Fits my Rock Island perfectly. Of coarse it protrudes from the grip.
February 11, 2023
Fit perfect and feeds ammo perfectly.
August 30, 2022
Fit perfect and feeds ammo perfectly.
August 30, 2022
Quality clip
Worked as advertised. Operated seamlessly in my Para 1911 double stack. Found no operation difference between the factory clip and this one. Going to purchase another. Highly recommend
February 10, 2022
Virtually Identical To Factory Mags
Bought two of these for my Para-Ordnance Expert 14.45 pistol. Both ran flawlessly with no failures to feed and locked the slide open at the end. Both were flush-fitting and ejected cleanly. I placed one of these mags side-by-side with the factory mag and it seems quite obvious that MecGar is the supplier of factory magazines for Para Ordnance (just as they supply factory mags for a number of other gun manufacturers). The only obvious difference is a slightly different baseplate and no "PARA" logos on the MecGar mag. The baseplate on the factory mag extends slightly in the front, while it does not on the MecGar version. Great mags, fair price. Recommended highly. Pros: Nearly Identical To Factory Mags
May 10, 2018
I would purchase this item again and probably will.
Bought this for a different weapon and it runs flawlessly!
May 5, 2018
They work well but...
They work perfectly but I ejected and empty mag and it fell on the concrete floor. The cheap plastic base did not hold up. The locking tab broke off. Replacements are not available so I did my homework and found aftermarket aluminum base pads the were slightly extended. With the mag funnel on my RIA TAC Hi-Cap, this was a win-win. This price and the cost of the aluminum base pads gave me an awesome mag that was still a good price.
November 11, 2017
I ordered 3 of these mags
I ordered 3 of these mags for my para 14.45 LDA. All three held all 14 rounds, little tight getting the last one in but they are brand new. Ran all three mags dry, fed properly, and caught the slide catch when empty
March 22, 2017
The magazine feeds fine d
The magazine feeds fine during operation, but it fails to lock the slide on the last round. The only other function is to lock the slide, so I gave it two stars since it only performs half of its intended purpose.
February 6, 2016
Will this fit a Girsan MC1911 C? .45
Answer:
No this will not fit. Try item # 7-MGCG4510B or 44709 or MAG-211 or MAG-274.
Will this fit a Rock Island M2911 A2?
Answer:
Yes this should fit.
Does this mag fit the Remington double stack 1911?
Answer:
Yes it would.
Will this fit a SAR USA K2 45?
Answer:
It should. Para P14 magazines are functional in the K2 but don't engage the slide lock.
I have a Para Ordnance P12. Will this magazine fit?
Answer:
Yes this should fit however it will stick out the bottom.
Will it fit springfeild 1911?
Answer:
Only if your Springfield 1911 accepts double stack magazines such as the V10.