The world's finest magazines deliver superior quality that manufacturers and professional shooters demand. State-of-the-art technical design, stamping, and tooling make Mec-Gar mags the number one choice of military and law enforcement agencies. Superior performance is guaranteed by the continuous improvements, 35 years of experience allow these mags to continuously feed and function flawlessly. Made in Italy.
Features and Specifications:
Manufacturer Number: MGMK22LRB
Mec-Gar Ruger MKII Magazine
Caliber: .22 Long Rifle
Capacity: 10 Rounds
Body Material: Carbon Steel Tube, heat treated for strength
Spring Material: High tensile music wire
Follower Material: Polymer
Baseplate Material: Polymer
Follower has easy load button
Removable baseplate
Finish: Blued
Fits:
Ruger Mark II Pistols
Features and Specifications:
Manufacturer Number: MGMK22LRB
Mec-Gar Ruger MKII Magazine
Caliber: .22 Long Rifle
Capacity: 10 Rounds
Body Material: Carbon Steel Tube, heat treated for strength
Spring Material: High tensile music wire
Follower Material: Polymer
Baseplate Material: Polymer
Follower has easy load button
Removable baseplate
Finish: Blued
Fits:
Ruger Mark II Pistols
15 Ratings
Liked them a lot and easy to modify for my Ruger Mark 1
September 29, 2023
Best for less
Delivered on time. Fits and feeds rounds well. Just as good as if they were from the original manufacturer.
April 22, 2023
Good quality (ruger) quality for a decent price
Works like a reg ruger mag. No issues whatsoever. Recommend
February 27, 2023
Works great.
At first they felt rough, but after applying grease to spring smoothed out and function is great.
December 22, 2022
Very disapointing
I'm very disappointed in this magazine. It caused my Mk II to jam time after time. My Ruger magazine works flawlessly so it not the gun or the ammo. I went out and bought a new Ruger mag and I'm trashing this one. Garbage!
December 1, 2018
This fit my late model Ruger Mk 1 22LR pistol
Not a perfect fit, but it will fit a Mark 1 without any modifications. (My clip button is on the left as shown, late model Mark 1). I shot a clip without it jamming. I will make a few minor modification to help it go in a little easier, it gets caught on the Mark 1 mag release going in and out, but it is no big deal. I bought two and am happy with them. Almost half the price of an Mark 1 mag.
July 2, 2018
I would buy this product again
Works great! fits and feeds correctly
March 28, 2018
Fits and functions exactl
Fits and functions exactly like the original Ruger OEM magazine that came with the pistol, and at 2/3 the price of a Ruger OEM magazine. I actually like the Mec-Gar better because the buttons at the side of the magazines are rounded, thus easier on thumb and forefinger than the OEM magazines.
March 9, 2017
bought 2 of these for my
bought 2 of these for my pre 1971 MK1 after checking with customer service to see if the button on the magazine could be moved from the left side to the right side. Pre 1971 Rugers had the magazine button on the right side and then in 1971 and newer, the magazines had the button on the left side and wouldn't fit in a pre 1971 ruger. I moved the button after taking the magazine apart, (be very careful when you do this since the spring is under a lot of pressure), and the magazine worked great.
March 8, 2016
I ordered 2 of the MKII m
I ordered 2 of the MKII magazines and am very disappointed with them. They don't even begin to fit into the receiver. I would not recommend these to anyone.
July 13, 2014
i switched the button to
i switched the button to the other side. for my mark one. We have put over 100 rounds through the magazine. no problems. I did put a little lube on the button. I plan to buy more when there available.
June 12, 2014
This mag would only load
This mag would only load 3/4 of the way up into the pistol. The slide buttom is alot small than the one on the ruger mag. I would not buy this item.
November 7, 2011
Just like the other two g
Just like the other two gentlemen said before me...these are every bit as good as the factory mags.
September 16, 2011
save a buck or two where
save a buck or two where you can! you can do it here without sacrificing any quality. bought two of these to shoot a rimfire game at my local club. flawless. every bit as good as the factory issue. they appear to be identical. it wouldn't surprise me to discover that mec-gar makes this item for ruger.anyhoo ... they work so well, i bought two more for steel challenge.
April 3, 2009
this is a great mag for
this is a great mag for a 22 longround it works great even with subsonic rounds that is with the ten inch barrelruger pistol to ok.just keep it clean works great.
June 24, 2007
Will these fit a Ruger MK II?
Answer:
Yes they do. Per the written description: Fits:Ruger Mark II Pistols
Will these Magazines fit and function in a Ruger Mark 1?
Answer:
No this magazine is not compatible with Mark 1 models.
Will this fit a standard Ruger .22lr pistol? It is NOT marked as Mark 1.
Answer:
This will NOT fit the Mark 1 or the "Standard" Ruger pistols. Try item 70458
Will it fit a mark 1 ruger
Answer:
Yes it will if you move the button to the other side of the mag.
What is the return policy on these?
Answer:
They are returnable within 90 days. You can review our return policy from the link at the bottom of the page.