MEC-GAR is a privately held family-run business that was founded by Mr. Edoardo Racheli in 1965 whose sole focus was the production of firearms magazines. The great success of MEC-GAR today is due to family pride, Fine Italian craftsmanship, hard work and dedication, along with modern equipment and proprietary manufacturing techniques. They are the most trusted magazine manufacturer in the world with over 50 years of experience and over 100 MILLION magazines manufactured specifically for the world’s largest firearm companies.
Mec-Gar magazines are heat-treated to provide additional strength. The feeding ribs are precisely formed and shaped to guide each round of ammunition without jamming or slow down. Mec-Gar magazines are made from certified Carbon Steel AISI 1010 or 17-7 PH aircraft-grade stainless steel. The are made of high tensile strength spring wire and reinforced coils with stiffening folds. This allows for an increase in thrust force. With the incorporated high strength custom blended fiber-fill nylon bases or heat-treated steel bases designed, they are able to withstand the most severe of durability tests.
Features and Specifications:
Manufacturer Number: MGBRHP15B
Mec-Gar Browning Hi-Power 9mm Magazine 15 Rounds Steel Blued Finish
Caliber: 9mm
Capacity: 15 Rounds
Body Material: Carbon Steel
Spring Material: High Tensile Music Wire Spring
Follower Material: Polymer
Follower Color: Black
Heat-treated Carbon Steel Body for strength
Removable steel butt-plate
Made in Italy
Finish: Blued
Fits:
Browning Hi-Power 9mm Pistols
Mec-Gar magazines are heat-treated to provide additional strength. The feeding ribs are precisely formed and shaped to guide each round of ammunition without jamming or slow down. Mec-Gar magazines are made from certified Carbon Steel AISI 1010 or 17-7 PH aircraft-grade stainless steel. The are made of high tensile strength spring wire and reinforced coils with stiffening folds. This allows for an increase in thrust force. With the incorporated high strength custom blended fiber-fill nylon bases or heat-treated steel bases designed, they are able to withstand the most severe of durability tests.
Features and Specifications:
Manufacturer Number: MGBRHP15B
Mec-Gar Browning Hi-Power 9mm Magazine 15 Rounds Steel Blued Finish
Caliber: 9mm
Capacity: 15 Rounds
Body Material: Carbon Steel
Spring Material: High Tensile Music Wire Spring
Follower Material: Polymer
Follower Color: Black
Heat-treated Carbon Steel Body for strength
Removable steel butt-plate
Made in Italy
Finish: Blued
Fits:
Browning Hi-Power 9mm Pistols
Quality workmanship and materials
Works flawlessly, no issues.
July 28, 2023
Awesome perfect fit!!!
July 12, 2023
Exact replacement
Perfect fit and function. High quality magazines.
July 10, 2023
Meggar 15 Rnd mags for Fn High power 9mm
I use these magazines in my edc gun and kit!
June 21, 2020
There is a good reason P35s hold 13 rounds, not 15!
The Browning P35 Hi Power, the Daewoo K5, and the Sig Sauer P228 could hold 15 rounds, but they hold 13 rounds, and for a very good reason! 13 round magazines feed more reliably, than 15 round magazines, and the springs last almost forever. I have Belgian 13 round magazines that have been in use since the 1960s. It's an okay magazine, but stick with what Savie designed, and you will be much better equipped for anything that comes along, provided you either buy MecGar or original Belgian mags. MecGar made the magazines for Browning starting sometime in the 1980s or 1990s. Pros: When these work they work. Cons: More prone to malfunctions
April 13, 2018
I could fit all 15 bullet
I could fit all 15 bullets, but the mag didn't fit in the gun properly so I had to use it with 14. It also didn't eject out the gun while empty.
June 29, 2014
Spring was very stiff, bu
Spring was very stiff, but still managed to load all 15 rounds. Fed reliably in Browning FN Belgian Hi-Power.
May 25, 2014
Haven't had a Problem fee
Haven't had a Problem feeding all 15 rounds I bought 3 mags, went to the shooting range, shot 200 rounds and the mags didn't give me any problems. planing to buy more
March 11, 2014
Feeds great in my FEG, ev
Feeds great in my FEG, every round. Drops free easier than the factory mag as well. I'll probably pick up a few more soon.
March 25, 2012
As expected, these Mec-Ga
As expected, these Mec-Gar magazines are beautifully made, and fit my Mk III Hi-Power perfectly. They fit flush in the grip just like a factory 13 round magazine but do in fact hold 15 rounds. They feed 14 of 15 rounds very reliably. (I used a variety of new, brass-cased FMJ ammo.) However, just as reliably, the last round creeps forward a few millimeters in the magazine. This creep causes the slide on my HP to prematurely lock open, as if the last round had already been expended. This 'last round creep' (and premature slide locking) consistently happens whether I start with 15 rounds or 3 rounds in the magazine. I bought 2 of these magazines, and both consistently demonstrate this behavior on the last round.
November 30, 2011
Will this fit a FEG 9HP?
Answer:
Yes this will fit. However, the magazine may extend a little past the bottom of the grip.
Will this work in a Arcus 98DA?
Answer:
This may or may not fit. Based on what I am seeing in online shooting forums, there are some people that say Hi-Power mags will run in a 98DA, however, there are also people commenting that they will not fit.
Will this magazine work in a late model (circa 1967), Belgian made, Browning Hi-Power?
Answer:
Yes this should fit.
Will this mag work with the Girsan MC P35?
Answer:
Yes, it should fit and function fine.
Will this fit a PJK-9HP?
Answer:
Yes, this Hi-Power mag should fit and function in your Hi-Power clone just fine.
