MEC-GAR is a privately held family-run business that was founded by Mr. Edoardo Racheli in 1965 whose sole focus was the production of firearms magazines. The great success of MEC-GAR today is due to family pride, Fine Italian craftsmanship, hard work and dedication, along with modern equipment and proprietary manufacturing techniques. They are the most trusted magazine manufacturer in the world with over 50 years of experience and over 100 MILLION magazines manufactured specifically for the world’s largest firearm companies.
The world's finest magazines deliver superior quality that manufacturers and professional shooters demand. State-of-the-art technical design, stamping, and tooling make Mec-Gar mags the number one choice of military and law enforcement agencies. Superior performance is guaranteed by the continuous improvements, 35 years of experience allow these mags to continuously feed and function flawlessly. Made in Italy.
Features and Specifications:
Manufacturer Number: MGPB9218AFC
Mec-Gar Beretta 92FS/M9 9mm Magazine 18 Rounds Blued Steel
Caliber: 9mm
Capacity: 18 Rounds
Body Material: Carbon Steel Tube (Heat Treated For Strength)
Spring Material: High Tensile Music Wire Spring
Follower Material: Polymer
Follower Color: Black
Polymer Baseplate
Flush Fit
Anti Friction Coating
Finish: Blued
Fits:
Beretta 92FS and M9
The world's finest magazines deliver superior quality that manufacturers and professional shooters demand. State-of-the-art technical design, stamping, and tooling make Mec-Gar mags the number one choice of military and law enforcement agencies. Superior performance is guaranteed by the continuous improvements, 35 years of experience allow these mags to continuously feed and function flawlessly. Made in Italy.
Features and Specifications:
Manufacturer Number: MGPB9218AFC
Mec-Gar Beretta 92FS/M9 9mm Magazine 18 Rounds Blued Steel
Caliber: 9mm
Capacity: 18 Rounds
Body Material: Carbon Steel Tube (Heat Treated For Strength)
Spring Material: High Tensile Music Wire Spring
Follower Material: Polymer
Follower Color: Black
Polymer Baseplate
Flush Fit
Anti Friction Coating
Finish: Blued
Fits:
Beretta 92FS and M9
24 Ratings
These are the factory mag
Identical to the factory Beretta Mags because they are...in fact Beretta shipped the same ones to me as well. Not a single misfeed in over 2,000 rounds so far.
February 9, 2024
High quality in every respect, typical Mecgar product.
this was purchased for a Girsan Regard 9mm.Feeds & functions perfectly, would highly recomend this for Girsan owners.
September 19, 2022
Very pleased with the Mec Gar
Exactly what I was hoping for
September 9, 2022
Good product at a good price
Work well in my Girsan Regard at a good price
September 1, 2022
Great service and products
Yes I like it and have been using it alot and have been buying more. Thank you
January 22, 2022
Works well in EAA Girsan Regard MC
I bought this to use in an EAA Girsan Regard MC (clone of the Beretta 92). It functions perfectly in my pistol. No malfunctions of any kind. The finish of this magazine is matte, unlike the picture in the product description. I would highly recommend this magazine.
October 9, 2021
Incredible
This is one of the best handgun magazines I've ever used. Better than Beretta's factory mags. Loads easy, never jams my gun. It's perfect. Will be buying more soon.
October 7, 2021
Good quality ,just like the two that came with the Beretta!
September 21, 2021
Great magazines
I bought 2 and both work great. Going to buy more.
May 7, 2018
Awesome
Works perfect and i like the 18rds instead of the 15rds mags. No failures, no problems, no brainer.
April 12, 2018
Bought for my Beretta model 96 to 92 conversion
Feels great, fits my 16+ year old 96 Centurion .40 caliber wonderfully. It will also load up about 13 rounds of .40 caliber, but I do not plan on using it for that. If I had any complaints--when you open a mag up there is a lower support for the spring... this one happens to be of pretty high quality plastic. It feels sturdy, I'm just not a fan of plastic. Overall, a wonderful product. I will likely buy another one mid summer.
February 15, 2018
I did buy again!
I ordered one 18 days ago and now have three more on the way. Three extra rounds and round count on the back is what made me want to try them. They work flawlessly, so if you are looking for a new mag do not pass this one up, they WORK!! Pros: They never fail Cons: None
February 14, 2018
They really work!
No surprise to the reliability of this magazine made by mec-mar. I have them for other calibers and never a problem. The big plus is the three extra rounds, 18+1 is very good. Also the holes for bullet count on the back is useful. At this price and 18rds I willl be buying more.
January 27, 2018
Excellent mags
These mags are awesome, work flawless and you can tell they are made well, go in and come out smoothly.
December 23, 2017
great mag
Great build quality, slides in firmly and locks securely, I will buy more.
December 18, 2017
Nice addition
This mag works flawlessly and fits flush. I plan to get more. Another three rounds is just fine with me. CTD service and shipping speed is top shelf! Pros: Works fine, fits flush Cons: Would prefer stainless to match my Inox
October 18, 2017
Excellent Beretta 9mm magazines
Very well fitting and stout magazines. I am impressed with the quality and like the high capacity.
September 2, 2017
Very good magazine. I not
Very good magazine. I noticed quickly that it does indeed fit 18, but that last round is packed in so tight in the seat of the magazine that it is jut enough mm out of balance when seating the entire magazine into the pistol that it doesn't full lock in. 17rnds works absolutely as good as you hope for, that pesky 18rnd should go in the chamber to make the full 18 cause the magazine just is a couple mm too high for it. Great look and feel to the magazine, I look forward to using these tons!
February 1, 2017
Ordered two of these. The
Ordered two of these. They are awesome. They click in perfectly. Very well made.
May 18, 2016
the best flush fitting ma
the best flush fitting mag money can buy much better than the factory mags and a better capacity. i will be buying more!
May 13, 2016
I've seen the same mags f
I've seen the same mags from other sellers and CTD is the cheapest but these mags are anything but cheap. Yes they were hard to load the last round of course. Your a fool to think differently. Hard to load mag in mag well with the slide forward but this will change too when the springs lighten up too. Rear round indicator is just fantastic. I've looked to find one thing to say bad about these and I can not. 18 rounds, great feed, no jams fits perfectly in the mag well and drops out with out any problems. Great, Fantastic a M U S T buy!!!!
April 15, 2014
Once again Mec-Gar does s
Once again Mec-Gar does something new and it works. Being a brand new mag it was a little hard to load the first time, After a couple of loads problem solved. I bought three of them loaded several different types of ammo in them to see if there was going to be a cycling problem. Never missed a beat. Good sold product
April 3, 2014
Excellent mag for any pri
Excellent mag for any price! Only problem with this mag is it only has mag catch/release 'cut out' for thumb operated mag button. If your Beretta is made in Italy or old enough to have mag release button at bottom of grip you will have to cut your own 'hole' in mag. not that hard . I did it myself. Maybe Mec-Gar will start making them with both like magpul.
January 21, 2014
I bought two of these and
I bought two of these and they have been great. I have used them numerous times and have been very happy with the quality and the function of them.
January 2, 2013
Will this fit a Kel TEC Sub2000 that takes the Beretta mags?
Answer:
If you have the Beretta magazine catch insert installed, then yes this will fit.
Which magazine will fit my .92fs compact 9mm flush?
Answer:
I recommend item # 90397.
Will this fit a Stoeger STR-9?
Answer:
No it will not.
Work with girsan regard mc?
Answer:
Yes it will.
Will this fit my 92X?
Answer:
Yes it will.
Is the mag flush fitting?
Answer:
In a full sized Beretta 92FS/M9, yes it is.
Will this mag or the 15 round mag fit in a steyr m9a1? I'm trying to find magazines that fit my steyr m9a1 I can't find any. I read that these would work.
Answer:
No they will not.
Will this mag fit the EAA Girsan Regard?
Answer:
Yes
Anybody know if the Beretta baseplates will fit on these mags?
Answer:
Yes, they should.
I assume they will but I wanted to be sure, will these Mags fit the 92A1?
Answer:
Yes they will.
Will these fit in/seat correctly in the newer M9A3 models?
Answer:
Yes they will.
You just answered my question regarding the compatibility with the 92S and the lack of mag release in the heel. However, in the Q&A section under this product, it is still answered that the mag is compatible with the 92S. I would request, and recommend, that you change that, so that it is not confusing, as it was to me. Thank you.
Answer:
Thank you.
You answered already that it fits in the 92S. However, I do not see a mag release notch in the heel of the magazine. Does it have one, and if so, can you send me a better picture of that side of the mag? Thanks.
Answer:
This magazine does NOT fit the 92S. Mec-Gar no longer puts the notch for the magazine release.
Do they sit flush in the full size 92fs
Answer:
Yes, they will.
Will this mag seat flush in a 92s?
Answer:
Yes, they will.
Will these work in a Beretta 92 Compact?
Answer:
No, it will not seat flush.
Will these work with the 92s?
Answer:
Yes, it will work.
Will these work CORRECTLY in a TAURUS PT92AF ??? It's a NEAR Copy of the 9MM Beretta.
Answer:
Yes, you can use them in a PT92AF.