When installed on the base of a rifle magazine, the Magpul provides unsurpassed speed and controllability during high stress, tactical magazine changes.
Durable thermoplastic loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para cord loops and duct tape tabs currently in use with special warfare units worldwide.
NSN: MAG001-BLK BLACK MODIFICATION KIT, GUN, WEAPON 1005-01-554-2868
Made in U.S.A.
Durable thermoplastic loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried and true para cord loops and duct tape tabs currently in use with special warfare units worldwide.
NSN: MAG001-BLK BLACK MODIFICATION KIT, GUN, WEAPON 1005-01-554-2868
Made in U.S.A.
24 Ratings
Nice product
Very useful recommend 100% to everyone
January 29, 2024
It's an MLOK rail ??♂️??♂️??♂️
Not much more to it. It functions as it should haven't really beat it up but my light is on my SBR now so I'm not complaining
April 12, 2021
Magpul provides yet again
This is a must have accessory if you run an electronic optic on your AR-15. Nothing is more frustrating than having your battery die and not having a replacement handy. I carry one CR123A battery and a couple DL1/3N batteries without issue.
December 16, 2018
Excellent
Great product. Easy to install.
July 14, 2018
Great flip up sight
Got this in OD green looks awesome, good quality, light weight, and great price
April 13, 2018
Awesome Product !!!
Fits very tight, but that's a plus, so it should not come off when in use
April 4, 2018
Like it!
Bought this as a backup sight for my Rock River Arms AR. It fits great on the standard rail, mounted behind my Burris P.E.P.R. 30mm scope mount. Polymer feels very strong, and locks down tightly on the rail. Very pleased with CTD's price on the item, too.
March 6, 2018
A nice add-on
These are a nice add-on to the gen 2 mags. Definitely makes it easier to pull magazines out of pouches.
September 4, 2017
I have these on EMags for
I have these on EMags for my Tavor and Gen2 PMags (both 30 and 10 round flavors) for my wife's SIG Sauer 516. They add a good grip point for pulling them out of a range bag or MOLLE pouch, as well as out of the weapon itself with the 10 round magazines. Their rubber construction also adds a cushion for reload drills on concrete range floors, though PMags are pretty tough already. Note that these are for Gen2 PMags (and EMags) and slide on from the front. Gen3 PMags require a different Ranger Plate that slides on from the rear.
August 4, 2014
Finally got a chance to b
Finally got a chance to battle sight zero the MBUS sight on my AR-15. The Magpul sight is well built and durable leaving little doubt that can withstand rough duty. I only needed the rear sight as my front sight is the fixed post. I had no problem getting the weapon zeroed in short order and I found the left right adjustment knob easy to use. The only complaint I have is that I wish the sight was easier to switch from the small aperture to the large. It can be difficult to fold down. Other than that this a another fine product from Magpul
February 23, 2014
protects the mag from any
protects the mag from any damage and makes the mag look nicer. magpul always makes awesome products
January 1, 2014
great piece of gear been
great piece of gear been using them for years,2 deployments to Iraq,and now civ life,No Problmes to reportPros...Faster mag draws,easier to draw maGS from mag pouch,faster,easier mag changes helps quiet with mag pouch rattle, easy to put on, stays on til you're ready to remove..cheap its a 3 pack !!!Fits AR's,Mini 14 20,30,40 round mags...Cons...May be a tight fit to close ur mag pouchs ,but with this item you can squish it down...sold only in 3 packs,very stiff when new,but easy to work with
April 23, 2013
Wanted a good rear flip u
Wanted a good rear flip up sight so i decided to go with Magpul since everything else on my rifle was Magpul. Very happy with my purchase! Installs in seconds without any trouble. Only problem i have is that the knob for adjustment can be hard to turn sometimes. Other than that its perfect.
February 13, 2013
What else can I say? Buy
What else can I say? Buy some, now. You will like them.
November 25, 2012
Received these on time. E
Received these on time. Easy to install and works well.
June 13, 2012
If you like PMAGs, you re
If you like PMAGs, you really have to give these a try. It doesn't matter if you keep spare mags in a pocket or in a ready bag. They make snatching your mags so much easier. These really make a great pair with the Ace shoulder mag pouch sold here at CTD.
June 6, 2012
Another amazing product b
Another amazing product by Magpul. Perfect fit on Magpul mags and extremely natural feel. Recommended to all!
February 21, 2012
I bought this to use with
I bought this to use with the Magpul Industries MIAD Grip Kit. Fits perfectly and holds the batteries with no rattle or sound at all. Perfect addition to the Magpul grip. Fast shipping with CTD as always. Very happy with both the grip and the insert and highly recommend both.
November 22, 2011
These things are great, r
These things are great, really make getting the clips out of my AR bag easy, just grab the loop and out they come. Made of a very durable rubber, they also provide a level surface on the bottom of the clip if you need to steady the rifle for a precise shot...Magpul products ROCK, and CTD has the fastest shipping, and really nice packing.
October 31, 2011
What can you say these ar
What can you say these are just plain cool. Will buy these for all my mags.
August 26, 2011
These came with a sweet s
These came with a sweet sticker and make my 40 round mag look amazing! buy this!
July 21, 2011
I Love the OD Green Magpu
I Love the OD Green Magpul products. I put front and rear flip ups on my bushmaster AR-15 and I love them. They were very easy to sight in. I only thing I would like to see them do in the future is make a tool to use to adjust the knob for sighting in. It is hard plastic and a sometimes is difficult to turn by hand and a wrench could tear up the plastic. CTD is great prices and service are a win win combo.
June 17, 2011
I recently bought this fo
I recently bought this for my bushmaster AR15. I love it. Right out of the box I mounted it went outside my home to my personal range. I was locked in on the bull in less then 30 rounds. I think its very easy to use as far as adjustments go. I shot 25, 50, and 100 yards with a few simple adjustments. The only reason I didn't give this 5 bullets is nothing is perfect.
May 30, 2011
If you have open top, ak-
If you have open top, ak-47 magazines and need some magpuls for them, this is the solution. These fit standard steel magazines, the Asian ones without the rib on the back, perfectly. They will fit European ones, but the rib may cut them eventually. They are tough and well made.
March 14, 2011
Does it work on the UTG polymer ar mags? I noticed the magpul pmags are flatter on the bottom
Answer:
Yes this should fit.