The Magpul Trigger Guard makes gloved shooting more comfortable and effective.
The MOE Trigger Guard's shallow "V" shape does not fold, has rounded edges, and removes an ugly gap at the bottom rear of the standard trigger guard where dirt and dust can accumulate. By allowing more space for gloved hands, this trigger guard facilitates tactical and cold-weather shooting. This polymer drop-in replacement for AR-15/M16 platforms includes all mounting hardware. The trigger guard also works well with most 7.62x51 AR platforms, though may require custom fitting.Visit our AR-15 Parts and Accessories section to continue upgrading your AR-15 with the best selection of attachments and upgrades online.
Magpul MOE Trigger Guard Features and Specifications:
- Shallow "V" Shape with Rounded Edges- Non-Folding
- Great for Gloved Hands
- Fills Standard Trigger Guard Rear Gap
Material: Polymer
Finish: Black
Includes Mounting Hardware
Made in the USA
Fits:
AR-15/M16 Platforms
Most 7.62x51 AR platforms (may require custom fitting)
20 Ratings
Cheap and Dependable Trigger Guard
Cheap and dependable trigger guard that is a must have for your build. I have used one of these for every build that I've done and could not be more happy with it. For the price and the quality of trigger guard, this magpul polymer one cannot be beat.
June 2, 2018
Great piece for your lower build!
This being the "plastic" one and not the aluminum model makes no difference besides price. If you want to save a little money buy this one! It's by no means cheap plastic, it's super rugged! Just to test, I threw it across my house and not even a single scratch. And I mean I threw it! Pros: Good fitment Cons: None
May 10, 2018
Nice trigger guard
Good for gloved hands or not. Take time installing use quality Allen wrench ( Bondhus)
February 28, 2018
Just what my AR needed
This was the last piece to the Magpul puzzle for my AR. Not too difficult to install, just had to make sure and take my time to do it right. Lots of tapping, but it was worth the wait.
January 1, 2018
Nice item for a decent pr
Nice item for a decent price, Fit very good, Solid,
August 27, 2016
I purchased this trigger
I purchased this trigger guard a few days ago, and it is a cheap but awesome upgrade. Had to do some minor work taking out the pins with a push pin rod, a hammer, and some pliers. But got it done within minutes. It is very durable polymer, very sturdy, feels like an OEM part of lower receiver. Feels smooth, looks great, and now I can wear shooters gloves with more trigger space.
June 23, 2014
I have a DPMS lower parts
I have a DPMS lower parts kit on my other AR and it's less roomy with gloves. With this, you don't need to worry about space for you finger with gloves on. I get extra space for my booger picker on the boom boom trigger. Easy to install but the bad thing is you need a hex wrench for the screw. But that didn't stop me from putting it together with my tools I already have.
April 18, 2014
Very easy installation an
Very easy installation and mounts solid. Living in a cold climate this item makes it easy to keep shooting with thicker winter gloves on. Would definitely recommend.
February 2, 2014
easy install, took all of
easy install, took all of 5 minutes. great Magpul part! fast shipping too!
December 3, 2013
Looks and feels great. Do
Looks and feels great. Does the job and is inexpensive.
November 10, 2013
Installed two of these on
Installed two of these on 2 ARs. Took about 10 minutes for both ARs, 6 minutes of those just looking for the tools in the garage. Sure does allow the use of winter gloves or simple shooting gloves. Black plastic blends right in with the finish, fills in that awkward gap behind the stock trigger guard, sits solid, and stays in place.
March 24, 2013
Installed on my Del-Ton i
Installed on my Del-Ton in 10 minutes. Feels much better than the slab of aluminum it replaced. Well worth it!
January 15, 2013
It is perfect. What more
It is perfect. What more can I say?
June 9, 2012
Installation was super ea
Installation was super easy, even without instructions, because I'm stubborn. Shaves a little weight and adds looks. Why spend more on an aluminum one?! Great product.
June 4, 2012
Lots of room by the trigg
Lots of room by the trigger with this trigger guard. Why waste a extra $10 on the aluminum one?
April 20, 2012
Got this, along with a Ma
Got this, along with a Magpul pistol grip and vertical grip. I don't shoot with gloves much, but this trigger guard just makes my M4 look awesome. Great fit and easy installation. It even fills the gap just forward of the pistol grip.
April 13, 2012
This is the best. Magpul
This is the best. Magpul is a great company.
February 5, 2012
Put this on my Stag with
Put this on my Stag with no fit-up problems at all. Looks great! Makes the grip feel better by filling 'the gap.' The only improvement I can suggest is supplying the hex head with the guard. I assumed 'all mounting hardware included' meant a hex head too seeing as the B.A.D. Lever came with its own torx. 4 bullets instead of 5 because being on a road job away from my tools, I had to go buy a 1/8 hex head. But it was all worth it!
January 12, 2012
The shipping was fast and
The shipping was fast and easy, and I received exactly what I ordered. I ordered a front sight from another company the same day I ordered this and I am still waiting for it. Next time I will order everything from CTD even if it is a couple bucks more.Looks better, will probably upgrade to an aluminum one in the future.
December 11, 2011
It does make room for glo
It does make room for gloves however I don't shoot with gloves and to be honest the factory straight guard is fine. But for the price an easy installation, I put this on my two AR's strictly for BLING factor. It's cheap and it looks a lot better than stock. It is what it is.
October 12, 2011
Is hardware included?
Answer:
Yes, hardware is included.