The UTG PRO M4/AR-15 15" Carbine Length SuperSlim Drop In Handguard is a handguard that features a rail that extends back to the upper receiver for a continuous mounting platform. It also extends past your carbine length gas block and front sight tower for even more mounting options. This easy to install two piece handguard is exactly what you need to give yourself some light weight slim and trim versatility to mount accessories. It's constructed from machined aircraft aluminum with a durable black anodized finish. Installation is easy using your existing standard delta ring, barrel nut, and handguard cap. Bring your modern sporting rifle into the 21st Century with the 15" Carbine Length SuperSlim Drop In Handguard.
Leapers Inc. has been supplying the shooting hunting and outdoors community with quality gear for over 20 years. They have risen to become a leading manufacturer of stocks, products and accessories for a wide variety of firearms. The Leapers UTG brand has become synonymous with unique and innovative hunting and shooting accessories at an affordable price point. Leapers/UTG is dedicated to being an industry leader in high quality firearms accessories at a price you can afford!
Specifications and Features:
Leapers UTG PRO 15" Carbine Length SuperSlim Drop In Handguard MTU015SS
AR-15/M4 2 Piece Handguard
Picatinny/Weaver Top Rail
Slim Tube Profile
Rail Extends to Upper Receiver for Continuous Rail
Rail Extends Beyond the Front Sight
Machined Aircraft Aluminum
Length 15"
Inside Diameter 1.89"
Weight 17 Ounces
Anodized Black
Made In The USA
Unconditional Lifetime Warranty
Includes:
Drop In Handguard
Easy Installation Manual
2x 4 Slot Add on Rail
2x 2 Slot Add on Rail
2.5mm Allen Wrench
2mm Allen Wrench
3x Set Screw/Pin
10x Hex Screws
Leapers Inc. has been supplying the shooting hunting and outdoors community with quality gear for over 20 years. They have risen to become a leading manufacturer of stocks, products and accessories for a wide variety of firearms. The Leapers UTG brand has become synonymous with unique and innovative hunting and shooting accessories at an affordable price point. Leapers/UTG is dedicated to being an industry leader in high quality firearms accessories at a price you can afford!
Specifications and Features:
Leapers UTG PRO 15" Carbine Length SuperSlim Drop In Handguard MTU015SS
AR-15/M4 2 Piece Handguard
Picatinny/Weaver Top Rail
Slim Tube Profile
Rail Extends to Upper Receiver for Continuous Rail
Rail Extends Beyond the Front Sight
Machined Aircraft Aluminum
Length 15"
Inside Diameter 1.89"
Weight 17 Ounces
Anodized Black
Made In The USA
Unconditional Lifetime Warranty
Includes:
Drop In Handguard
Easy Installation Manual
2x 4 Slot Add on Rail
2x 2 Slot Add on Rail
2.5mm Allen Wrench
2mm Allen Wrench
3x Set Screw/Pin
10x Hex Screws
27 Ratings
Looks great
I would have given it 5 stars but my only reason for not doing so was the picatinny attachment pieces. They work great but only come in two sizes. For most that isn’t a problem and is really just me being picky more than anything. I would recommend this to a friend and have done so. Looks great and fit well. Thanks guys!
July 2, 2023
Love it easy to assemble..quick shipping
March 1, 2023
Looks Good!
works and looks good on my S&W sport 2. It did take some effort to put in and the screws are the hardest part, don't mix up the two types of screws.
February 9, 2023
Great handguard for the price
Great hand guard for milspec carbine length AR’s. I installed it on a Ruger 556 with the front iron sight. The handguard required a little bit of filing in the area of the qr strap socket/bayonet lug. Other than that, it fits perfectly, seems to be decent quality, install was fast and straight forward and took about 10-15mins total with filing. The attachment when fully installed is solid and durable and makes a great mounting surface for accessories. I’m very happy with this handguard.
September 17, 2022
Sexy handquard
Installed on my lil bride's "ARF"! AR Fifteen! SW MP2 She did most of the work.
June 30, 2022
AR15 Drop-in Hand Guard
Worked great, easy to install (about 10/15 minutes), looks great.
March 26, 2022
There were not enough of the longer hex bolts to attach a vertical foregrip or tripod.I wrote the company and asked if it was possible that the rail was made in America but the hex bolts made elsewhere. I viewed their video on installing it and did not use anywhere near the hand torque it demonstrated. I was very careful, but believe that the some of the threads on the rail were stripped by the hex bolts. This was especially true on the upper forward rail section. Aluminum is relatively soft, as you know, compared to steel bolts. I asked them if it was possible that the threads per linear inch might be different in the rail versus bolts. It seemed that the alligned bolt would start to go in, but then stop. It you applied a little torque it seemed to strip the threads in the rail.I am waiting for a response from the manufacturer. I am reluctant to send it back for a replacement if my theory about the rail threads versus bolts is true and I would end up with the same place. It is very frustrating.
December 19, 2021
Great look, poor fit.
I love the look of it. But it doesn’t fit around the gas block of my M&P 15 sport 2. You have to modify the existing openings so that it all mounts flush. Kind of disappointed.
October 15, 2021
CTD products rock !!
Exact fit for my S&W M&P 15. Looks great, great heat shield, ready to add accessories. (Get a delta ring removal tool).
September 25, 2021
Great rail terrible screws.
The rail is solid but the screws strip very very easily. If you tighten them they will strip trying to back out. I would get different screws. My rail is now stuck on until i dremel the screws out. Not sure how others did not have this issue especially the people using thread locker.
August 19, 2021
Definitely what I was looking for and it works for my set up
August 17, 2021
I would buy this again
It's easy to install and its nice and sturdy I would recommend this to anybody
March 1, 2021
Fits perfectly and easy to install on my S&W M15 Sport 2
Recently purchased for my S&W M15 Sport 2 5.56 fits perfectly! Very easy to install.
October 21, 2020
Had cut it up a bit for fitting
Very light, durable material. Unfortunately the underside did not fit forward of the gas block/sight mount for my optics ready M&P Sport II....It was a relatively easy fix with my dremmel and some touch up paint, but I was a little disappointed to have to do that in the first place. I'm sure if your rifle comes with a pinned front sight it would fit just fine. Slight amount of wobble after install, which may have been from my cutting out some of the metal. Comes with several picatinny rail sections, all the necessary screws and allen keys to install - just don't forget the loctite! Pros: Lightweight, sturdy material Cons: Not universal fit
February 28, 2020
She's tight...
I'm new to the AR world. My wife bought me a Ruger AR 556 and it's a great gun at a low price. I've been searching for something like this to upgrade my rifle. When I found it, I was a bit hesitant to purchase. After some time I finally pulled the plug and got it. Delivery was quick. Item was well packaged. Upon installation, I encountered a small issue. When trying to fit the bottom front of the handguard on, the part that goes around the bayonet lug/QD point of the gas block wasn't big enough. After some deliberation, I decided to grind it down. I didn't have to take much off, but I got it to fit. As you can see from the included photo, it wasn't exactly pretty, but it got the job done. Overall I'm really happy with the product and if I get another rifle where I need this, I won't hesitate to buy again.
May 30, 2019
Great Addition to Your Carbine
Didn't really want to change the factory look of my Colt but that chunky hand guard had to go. Wow, totally changed the handling characteristics of my Colt LE6920. Fit & finish were superb & Installation was a breeze. For extending the adaptability of your standard AR carbine this unit is hard to beat at any price point. Extra Bonus- Made in the USA!!
November 27, 2018
Awesome!
I love this handguard and I love the price! Looks and easy to install. The only negative comment I have to make is that I own a Ruger AR 556 and I had to grind a little meat off the side QD spot on the gas block. Dont know why Ruger made a proprietary one. So if you have a different AR or an aftermarket gas block you won't need to modify it. Definitely would recommend to a friend. Pros: Looks great and at a great price. Cons: Had to modify my Ruger AR556 to make it work.
September 6, 2018
Very Satisfied
This looked like a nice 15" aluminum hand guard. I was happy it was made in the USA. But even more, I was stoked that it didn't cost an arm and a leg. Looks great on my rifle as well.
August 24, 2018
Great quality
Fit my M&P 15 perfect not loose at all. The only thing is the hex wrenchs supplied don't fit the screws perfectly and makes it easy to strip out the screw.
August 22, 2018
recommend to anyone that wants to keep org. iron sights
perfect fit. slim and light weight ,especially compared to the quad rail i had on before
November 1, 2017
Great fit Easy Instal
I installed this on my Colt Expanse. I was able install it easily without any special tools, although a delta ring tool was recommended. Just popped off my the stock hand guard and popped this one's three pieces in place then secured it with included screws. No need to mess with stock front sight or strap attachment. It came with four small picatinny rails which can be attached under or on either lateral side of the guard for you accessories. Stock my AR weighed 6.25 lbs unloaded. With this new hand guard, magpul veritcal grip, popup rear sight, it weighed in at just over 7lbs. Not bad. Looks great. Still have to shoot it to make sure everything stays in place. Pros: Attractive
June 2, 2017
This is so easy to instal
This is so easy to install, and works great. I installed this on an S&W M&P 15 Sport 2. I had to adjust the barrel nut slightly. maybe 0.002in. just to get it perfect. The hex wrench that came with it is too small, I stripped a screw, so I got one that fit tighter so all is good. Does what it is supposed to do. I would not trust it for front sights, but the whole point is to use the front A2 gas block sight anyway.
March 1, 2017
Good piece of kit. If yo
Good piece of kit. If you have a standard M4/AR15 style rifle and want to make it look like what our special ops guys use, this handguard is for you. Plenty of space for your hands as well as a light, laser(coffeemaker/microwave)whatever!
February 12, 2017
This fits perfectly on my
This fits perfectly on my Smith & Wesson M&P Sport 2 AR and I paid almost half of what I was going to pay for the TROY Delta rails. Made in USA so you know it's quality stuff, came with extra rails I can use to fit my vertical grip and then some...I was skeptical at first but saw the pictures and was convinced by the other reviews. Overall, if you have a front sight and want that low profile look, do not hesitate to buy this item. Highly recommended!
November 28, 2016
Installed this on my AR15
Installed this on my AR15 and I can not be happier. It gives added reach for those of you with longer arms and is comfortable yet slip resistant for the hand. I was skeptical at the beginning and did quite a bit of research on the product before spending my hard earned money on it. It is worth every penny. It comes with all the necessary hardware to install it and once it is installed it ain't going anywhere. If you are like me and have been thinking it over and debating... stop, It's Worth It.
October 17, 2016
Just installed this rail
Just installed this rail on my Smith & Wesson M&P Sport 2. It was easy and quick. It looks really good, it also has a cut for the sling swivel. I received this item with in today's of my purchase. I would recommend the delta ring remover to make the process easier. I used it in did it in 5 mins.
August 23, 2016
I ordered this rail becau
I ordered this rail because it was at a great price and let me tell you... U.T.G. came through like champ! I had the rail on in less than 30 minutes and it looks awesome! The fit is tight on my M&P AR-15, and it comes with 4 add-on rails. Thanks for the great deal!
December 4, 2014
My Windham Weaponry ar15 carbine has a bayonet lug adapter that sticks out underneath the barrel, below the A2 front sight. Will this drop in hand guard clear the bayonet lug??
Answer:
This will accommodate a standard A2 style bayonet lug, such as the one found on the Windham 16 M4 models. However, if you have a proprietary bayonet lug, such as the one on the Ruger AR556, then you may need to remove some material for this to fit.
Does it fit the ruger ar556?
Answer:
No this will not fit.
Are there hand gaurd covers that can be added to keep heat down?
Answer:
UTG does not have rail covers that mount directly into the holes, but they do have rail covers that mount to picatinny rails. This handguard comes with 4 rails and additional UTG super slim compatible rails can be purchased separately. Check out item # 16-RB-HP12B-B and 16-MTURS03S and 16-MTURS03M and 16-MTURS01M.
Which 15 in handguard WILL fit the M&P sport 2 with picatinny gas block?
Answer:
We do not carry any that are designed for a picatinny gas block. Extended 15" drop-in style handguards are typically designed for the A2 style front sight and you may need to remove a little material from the picatinny rail on the gas block to use this style handguard.
What type of picatinny rails do I need for the bottom and sides?
Answer:
This handguard has a proprietary attachment method for the side mounted picatinny rail sections, but it includes two 2 slot rails and two 4 slot rails for mounting accessories.
Will this fit over 1.625 OD suppressors?
Answer:
The inside diameter of this handguard is 1.88", so while it will be close, this should fit.
Will a hera arms cqr forend grip fit with the rifle sling mount?
Answer:
It may utilize one or more of the picatinny add on rail sections, but yes.
Will this fit springfield saint?
Answer:
There is now more than one variant of the Springfield Saint. If your Saint has an A2 style front sight, then yes this will fit. If your Saint has a free float handguard, then your rifle will require additional parts for this item to fit.
Will it fit the S&W M&P Sport 2 Model #10305?
Answer:
Yes this will fit.
Can you use mlock on it?
Answer:
No, this handguard does not have M-Lok compatible slots. However, it does include two 4 slot rails and two 2 slot rails for mounting accessories.
Will this fit the mp sport 2? I've seen you've changed up your answers recently
Answer:
There is now more than one variant of the M&P Sport II. This will fit the Sport II with A2 style gas block and will not fit the version with the gas block with picatinny rail on top.
Will it fit a ruger 556 ar?
Answer:
No it will not.
Will it fit DPMS panther?
Answer:
If it has a carbine length gas system and requires a drop in handguard, this will fit.
I have the colt cr 6920 will this fit as a replacement hand guard from the factory?
Answer:
Yes it will.
Will this fit a Bushmaster XM-15?
Answer:
It will fit on any AR-15 with a delta ring, circular handguard endcap, standard front sight gas block, and carbine length gas system
Will this fit the m &p 15 sport 2 optics ready. I seen you answered that it fits the standard size of the sports 2 but I am curious about the high profile picatinny rail version on the optics ready model.
Answer:
No it will not, unless you have the standard front sight block, and not the railed gas block that comes on certain S&W M&P Sport 2's
Will this fit my Smith & Weston m&p sport 1? And how long does this usually take to ship? My area code is 83634. Thanks!
Answer:
Yes this will fit your Sport. You can choose your shipping method and times at checkout.
Will this fit a Windham Weaponry MPC R16M4A4T?
Answer:
Yes it will
Will this system work with the ruger AR-15 style screw on heatshield ring? Is there a better one for dealing with that delta ring style?
Answer:
The portion of the Ruger gas block that the rail fits around is not wide enough, it would have to be modified or ground down to do so. Any modification would void warranty service.
Will this fit an Adams Arms AA15?
Answer:
It will if you have an A2 front sight post and circular handguard end cap
Will this fit on a bushmaster carbon 15
Answer:
No it will not.
Will this fit on the Ruger AR 556, model 8511? Thank you.
Answer:
No it will not.
Will this product fit the Springfield Armory Saint AR 15?
Answer:
It will only fit if you have a carbine length gas system.
will this handguard fit my Colt M4 16" carbine?
Answer:
Yes, this Leapers UTG PRO M4/AR-15 15" Carbine Length SuperSlim Drop In Handguard will fit most models of the Colt M4 carbine.
I need to buy extra rail sections for this product. Do you sell them?
Answer:
Item#'s: ARR-276-030 ARR-17-200 and ARR-17-197
Will this fit a Windham Weaponry SRC?
Answer:
Yes it will.
Do you carry this handguard to fit a Rugar Ar 556?
Answer:
Try item ARR-276-091
Is this rail compatible with Picatinny foregrip mount or mlok, Keymod?
Answer:
This handguard includes a total of 4 short picatinny rail sections that you can mount to various positions, so it is compatible with picatinny foregrip mounts... The slots on the rail are not M-Lok or KeyMod compatible.
Would it fit the MP 15 Sport 2 optics ready?
Answer:
No it will not.
Will this fit smith and Wesson m&p 15 sport 2 with integral rail gas block?
Answer:
No, it will not.
will this fit AR-10/308
Answer:
No that we are aware of.
Can you put a forgrip on the bottom of the rail?
Answer:
Yes
Is it compatible with the Bushmaster Carbon 15?
Answer:
Yes it is.
Will this item fit a Rock River arms LAR-15?
Answer:
Yes it will.
Will this fit. Ruger 556 ?
Answer:
No it will not.
Will this fit an Armalite M-15 Carbine with railed gas block?
Answer:
No it will not.
I ordered an extra long picatiny rail but the holes do not match up, is there specific rails I need to order for this hand guard?
Answer:
This would only be compatible with Leapers UTG Super Slim rail sections. Item 16-MTURS02LD is the longest one made.
Will this fit DPMS Oracle?
Answer:
No it will not.
Does this hand gaurd have a picatanny rail on the bottom to mount the utg bipod foregrip?
Answer:
The bottom and sides of the handguard has slots for you to mount picatinny rails to it. This particular handguard also includes a couple small picatinny rails to mount in any configuration you like.
Will I be able to mount the leapers utg bi-pod grip to the bottom of this handguard. The bi-pod grip is also on your webstite. Part # Brand: Leapers UTG MFR #: MNT-DG02Q UPC: 4717385554726 Item #: GRIP-245
Answer:
Yes, the bottom and sides of the handguard has slots for you to mount picatinny rails to it. This particular handguard also includes a couple small picatinny rails to mount in any configuration you like and the bi-pod grip will attach to these picatinny rails.
Is the bottom rear piece the only 1 that locks into the delta ring AND the front sight post? Or does the top rail piece also lock into the front sight post as well?
Answer:
The top and bottom bolt together around the front handguard cap.
"Will this fit on a Windham Weaponry WW-15 NY Compiant?"
Answer:
No it will not.
Will this fit the new Smith & Wesson MP15 Sport II? Can a rail be mounted to the bottom for a hand grip?
Answer:
This will fit an S&W M&P15 Sport II, and rails can be added at 3, 6 and 9-o-clock positions.
How many inches is the gap in top for the Front Sight? I also have the railed gas blocker and think it might squeeze around, but don't want too much of a gap.
Answer:
This rail usually does not work with railed gas blocks.
Does this product come in OD color or similar and will this fit a Colt AR15 Sporter 2 rifle?
Answer:
Leapers only offers it in black. It should fit the Colt.
Will this fit my Bushmaster Carbon 15? Can I add accessories to the bottom of this hand guard?
Answer:
Yes it will fit, and yes, you can.
Will this fit my stag model 8 piston driven gun?
Answer:
No.
I have a yhm phantom can, will it fit inside the rail system?
Answer:
Yes, it should.
Will this fit my Sport 2 that has a railed gas blocker
Answer:
Probably not. This is for use with a front sight tower.
Will this fit with a YHM two piece railed has block?
Answer:
It will probably fit.
Previous questions asked if this product was M-Lok compatible. The question was answered saying it was not compatible with M-Lok or Key Mod systems. So, what accessories are available for attaching accessories to the rail? Are there more weaver rails that can be purchased separately?
Answer:
It comes with four add-on rails.
Will this fit the Palmetto Arms "Freedom" rifle 16" barrel?
Answer:
Yes, it will.
I have a bayonet lug extension will this fit around it?
Answer:
Yes, it will.
Will this fit a Remington 870 Express Tactical 12G?
Answer:
No, it would not.
Will this fit an American Tactical with a receiver height gas block?
Answer:
Yes, it will.
Can you mount a quick release grip on the bottom of this handguard?
Answer:
Yes you can.
It says 15 inches but in specification/ descriptions says 10.7 inches?
Answer:
It is 15". The descriptions are being corrected, thanks!
Will this fit my Anderson .556 with a railed gas block?
Answer:
Probably not.
Does it have extra rails to mount on the side?
Answer:
It includes two 4-slot and two 2-slot rail segments.
Will this fit the smith & wesson m&p sport 2?
Answer:
Yes, it will.
Fit Springfield saint?
Answer:
No. This is for rifles with carbine length gas system.
will this handguard fit a CORE mod 15 with A2 front sight & 16 inch barrel
Answer:
Yes, it will.
Will this work with a Colt LE6920? And if so is it in stock at the Fort Worth store?
Answer:
This will fit a 6920, we do not have a store any more.
Will this fit the bushmaster XM15 QRC AR-15???
Answer:
Yes it will.
Would this fit a standard issue M4A1 with a 14.5 inch barrel?
Answer:
Yes it will.
Will this work on my midlength gas system upper?
Answer:
No, this is carbine length.
Is this hand guard compatible with magpul mlock accessories?
Answer:
No, it is not M-LOK compatible.
Will this fit a M&P 15 Sport 2 with a railed gas block? Its on the same plane as the uppers' top rail but not sure if the gas block is of the same dimensions as "A" sight post.
Answer:
Yes, it should work.
Will this fit a Ruger AR 556? thanks
Answer:
No. Because of the Ruger's non-standard front sight gas block this will not fit without modification.
Will this fit a windham weaponry src 5.56 with a railed gas block?
Answer:
It will require a low profile gas block.
Regarding: Brand: Leapers UTG MFR #: MTU015SS UPC: 4717385550278 Item: ARR-276-002 Carbine length M4 and AR-15 style rifles with standard Delta Ring and round handguard cap. This drop-in hand guard is for a Carbine length gas block. Is there one made for a mid length gas block
Answer:
We do not have a drop in extended rail for mid length gas systems.
Is there a model for a mid-length gas block of the same 15" SuperSlim Drop-In Handguard ? i.e. Alexander Arms >.50 Beo
Answer:
You might Troy Delta Mid Length if you can find one.
Will this fit my AR-15 scout rifle?
Answer:
It will fit any AR-15 with a carbine length gas system and two piece factory plastic hand guards.
Will this fit Adams arms AA 15 ? Has a railed gas block
Answer:
It might. It is designed for use with an A2 front sight. It would depend on the dimensions of your gas block.
Will this fit windham weaponry src 762x39? It has the railed gas block that sits flush with the top rail of an average quad rail. Looking for a longer handguard.
Answer:
This will probably not fit your rifle with the railed gas block, but it might. The SRC has a unique gas block.
Will this fit a DPMS oracle?
Answer:
No. The Oracle's gas block will not fit the opening.
What's weight on this handguard ?
Answer:
14.1 oz.
Is this handguard compatible with m-lock and key mod forward grips?
Answer:
No it is not.
Will the fit a Colt M4 LE6920?
Answer:
Yes this will fit the Colt 6920.
Will this fit a Ruger AR15 5.56? The only reason I ask is I have seen other drop in extended hand guards that specifically call out this model AR stating they are not compatible.
Answer:
No. The proprietary front sight A-frame on the Ruger AR-556 prohibits this hand guard from working.
Does this fit a s&w m&p15 sport 2
Answer:
Yes, this handguard will fit any AR-15 that has the standard, polymer, carbine-length hand guards like the S&W M&P15 Sport II.