The Leapers UTG Pro M-LOK Super Slim free float hand guard fits DPMS low profile .308 Winchester AR style rifles, and provides tons of real estate for your mission-critical accessories. It is precision machined form 6061-T6 aluminum and has an ergonomic octagonal profile with grooved surface that provides a solid, comfortable grip for firearm handling. Anti-rotation tables prevent the hand guard from rotating under heavy use. The super slim design fits with standard gas tube and barrel diameter not exceeding 1". It is not compatible with piston systems.
Specifications and Features
Manufacturer Number: MTU038SSMC
6061-T6 aluminum
M-LOK attachment system
Flush fitting, top Picatinny rail aligns with upper receiver rail
Anti-rotation tabs
Ergonomic octagonal profile
All installation hardware included
Hard coat anodized
Overall length 17"
Width 1.7"
Height 2.1"
Matte black
Fits: LR-308, SR-25, S&W M&P-10 and other DPMS low profile AR style receivers
Unconditional Lifetime Warranty
Specifications and Features
Manufacturer Number: MTU038SSMC
6061-T6 aluminum
M-LOK attachment system
Flush fitting, top Picatinny rail aligns with upper receiver rail
Anti-rotation tabs
Ergonomic octagonal profile
All installation hardware included
Hard coat anodized
Overall length 17"
Width 1.7"
Height 2.1"
Matte black
Fits: LR-308, SR-25, S&W M&P-10 and other DPMS low profile AR style receivers
Unconditional Lifetime Warranty
3 Ratings
Great product
Perfect hand guard for a M&P10 barrel nut went on perfect and te tool you get with this works great
May 31, 2022
Great product
I have Leapers UTG Pro Super Slim handguards on all my rifles. 15" on my PC C and 5.56 rifles and the 17" on my M5.
May 20, 2022
exactly as described and arrived early
fit perfect on my MP10 S&W
September 15, 2018
Will this fit on an M&P AR-10?
Answer:
Yes this should fit.
Will this work on a cmmg mk3? I'm putting a 20" ballistic advantage heavy barrel on
Answer:
This handguard has a low profile top picatinny rail and the MK3 has a high profile rail, so the picatinny rails on top will be different heights. I recommend item # 16-MTU026SSMB or 133749 or ARR-933-050.
Will this work on an Armalite AR-10, if not any suggestions, it has a 20inch barrel?
Answer:
No this will not fit and unfortunately we do not have any Armalite compatible handguards in stock at this time.
Will this fit smith and Wesson AR 15, 223/556?
Answer:
No it will not. This is for the Smith & Wesson M&P10 model chambered in .308 Winchester or similar AR-308's with a DPMS pattern Low Profile receiver.
will this fit a PA10 (palmetto 308 ar)?
Answer:
PSA uses a DPMS barrel nut thread pitch, so this handguard will thread on and fit a PA10. Please note, there is a chance the picatinny rail on top will be lower than the top rail on your receiver. PSA does not specify weather their receiver's top rail is high or low profile. Internet chat says their receiver uses low profile, as does this handguard, however, the manufacturer does not specify.
Will this work with a PA-10 gen 3 in .308?
Answer:
Yes it should.
Will this work with a Stag 10 upper?
Answer:
No it will not. Look for DPMS High Profile handguards.
What is the weight of the handguard with and without the barrel nut. Im trying to find a balance of light and accurate for these notoriously heavy rifles
Answer:
The overall weight is listed as 14.4 oz with the proprietary barrel nut required for installation.
It is work with smith and wesson MP 10 308 All tool for install is also included
Answer:
Yes, but you may have to replace your gas block.
Will this go with an aero m5 / aero 20" as heavy, Does it include a barrel nut?
Answer:
Yes it will. It also includes the barrel nut and barrel nut wrench.
Does this come with any tools and Hardware
Answer:
This handguard includes an 8 Slot Picatinny Rail Section for Accessory Mounting, a QD Sling Swivel Adaptor for Sling Swivel Attachment, Barrel Nut Wrench, Additional Installation Tools, and Easy to Follow Instructions.
Does this come with all tools and Hardware in order to install
Answer:
This handguard includes an 8 Slot Picatinny Rail Section for Accessory Mounting, a QD Sling Swivel Adaptor for Sling Swivel Attachment, Barrel Nut Wrench, Additional Installation Tools, and Easy to Follow Instructions.
Will this work on my 6.5 grendel
Answer:
No, this is for an LR-308 platform. The 6.5 Grendel is typically an AR-15 platform caliber. The AR-15 version of this handguard is item# ARR-17-486
Will this fit my armalite ar10-A?
Answer:
No. Item ARR-276-092 will.
Will this work on an Armalite AR-10?
Answer:
No it would not.
The Trunnion end of my Barrel that goes into the Upper Receiver is greater than 1 inch in diameter. Even my slim profile AR10 Barrel is greater than 1" at the Trunnion. I know it says in the description that it will only work with barrels up to 1". Is this a problem? Or do they only mean 1" at the Gas Block?
Answer:
They mean 1" in front of the barrel nut.
I'm planning on installing this on my Aero Precision M5 .308 Upper Receiver with an Anderson Manufacturing 24" SS Heavy Fluted Barrel and an Odin Works Low Profile Adjustable Gas Block. Do you foresee any conflicts?
Answer:
No, it should work out well.
Do any tools come with this model?
Answer:
Yes, it includes a barrel nut wrench
will this fit a rock river .308
Answer:
Probably not. This is for DPMS profile rifles.
How do I get this to fit my Smith MP10? The stock plastic guards are 8" I cant move the gas block, is there a replacement low profile gas block in this package?
Answer:
A low-profile gas block will need to be purchased separately. Try item ARR-577
Will it fit an aero std. upper 308
Answer:
The Aero M5 .308 upper receiver is compatible with DPMS LR-308 High Profile handgaurds. Longest UTG M-LOK handguard that will work is item # 16-MTU026SSMB.