Lightweight and Durable Leapers UTG PRO AR-15 Drop-In M-LOK Handguard
Take your AR-15 to the next level with this UTG PRO drop-in handguard. It features M-LOK rail slots to equip your favorite accessories. Securely attach all the lights, lasers and foregrips you want to your favorite rifle. This lightweight handguard offers simple and friendly installation with no gunsmithing required. A full-length handguard is a great way to improve the handling of your rifle. Additionally, the handguard features a top rail for mounting scopes and optics. Make your next range visit one to remember with a new handguard for your AR-15 rifle.
UTG PRO Handguard Features and Specifications:
- Proudly Designed and Made in the USA
- Compatible with Standard Delta Ring Assembly, Barrel Nut and Round Front Handguard Cap
- Lightweight with 30 Slot Scalloped Top Picatinny Rail, Extends to and Meets Up with Upper Receiver Flat Top, Providing Ample Real Estate for Optics and Other Accessories
- Features 45 M-LOK Slots on Seven Slot Tracks for Mounting M-LOK Rails and Direct Accessories, Easily Tailoring the Rifle to the User's Specific Requirement
- Three-Piece Slim Octagonal Profile with Ergonomic Grooves for a Solid Support Hand Grip and Superior Handling Comfort
- Precision Machined from 6061-T6 Aluminum with a Matte Black Anodize
- Includes Two M-LOK Accessories, an Eight-Slot Picatinny Rail Section for Accessory Mounting and a QD Sling Swivel Adaptor for Sling Swivel Attachment
- Ready for Use Right Out of the Box
- Simple and Friendly Installation, No Gunsmithing Required
I would suggest this if you don’t want to change you gas block .
This fit my dpms sportical very nice with no modifications at all.
September 15, 2024
Good Handguard for A2 front sight post AR
Feels like quality and easy to install
July 23, 2024
Great for options
Great for the limited market. Only decent hand gaurd that would accomodate a sling swivel and a2 sight post. It is sturdy enough to hold accessories but it does not hold zero. Shifts about 1/8 inch at barrel tip but is free floated so it will not effect accuracy. Would buy again if needed
May 19, 2024
Fast shipping and great looking, but….
Beware.. There isn’t any heat shield. Couldn’t hold onto after 75/100 rounds. Great product for AR’s with A2 gas block/sight, but needs some heat protection.
March 23, 2024
Great item if you wanna keep your a2 sight
Fit perfectly and gave me so much more room.
March 13, 2024
Works great
Super impressed. Install was easy and gives me so much more room without removing my A2 sight and gasblock. Shipping was super fast!
March 2, 2024
Very satisfied
Well made. Slender and light weight with plenty of space for accessories. The product came with thorough instructions and hardware. I recommend a D-Ring tool and blue Loctite for the installation. Installation was quite easy.
February 27, 2024
Great upgrade for your carbine gas gun!
Great upgrade for older carbine length gas system rifles. Allows for more length of pull, more mounting options, feels sturdier, and it slimmer overall profile. Also looks WAY cooler. Easy install and fitment on my DPMS carbine length rifle (no front sight post, but will fit FSB too). Only downsides is there is a gap in the MLOCK rail on the bottom where the gas block is at, right where I like to mount a grip/handstop. But not a big deal. Also the back of the pic rail bends upward to meet the taller upper receiver rail and it just looks kind of awkward but thats probably the only way they can get it so slim. You can actually see it in the stock photo. But for the price, very nice upgrade for your older rifle. Check out my attached photos to see how it helped with my rifle's makeover.
January 24, 2024
Easy to install. Looks great.
December 31, 2023
Looks and works great for the money.
December 30, 2023
Will this fit a sig m400 enhanced carbine from 2012-2014 era with the A2 front sight?
Answer:
If your M400 has an A2 front sight and delta ring assembly, this should fit.
What picanny rail do I need for the bottom of handguard?
Answer:
This handguard includes one 8 slot picatinny rail and it will accept M-Lok compatible picatinny rails. Check out item # 16-MTURS09M and 126958 and 2-ARSRS-RAIL-3M.
Will this fit an M16a2 ?
Answer:
No it will not.
Will this fit a Springfield saint with a2 sights?
Answer:
Not if you have a mid-length gas system.
Will this fit S&W M&P Carbine?
Answer:
There is more than one variant of M&P Carbine. This will not fit an M&P Folding Pistol Carbine. This will only fit if you have an AR with a carbine length gas system and an A2 style front sight. If you would like additional assistance you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
WHAT IS THE ID " INSIDE THIS RAIL ?
Answer:
This handguard has an internal diameter of 1.58".
Will this fit on my stock Palmetto State Armory PA-16 carbine ?
Answer:
If you have a carbine length gas system and require a drop in handgaurd it will.
Would this work on an AR-10?
Answer:
No it will not.
Will this work on my m&p sport 2 optics ready without removing the gas block?
Answer:
If you that the M&P Sport 2 Optics Ready model with the A2 style front sight/gas block, then this will fit and you will not need to remove the gas block. If your model has a short picatinny rail on top of the gas block, then this will fit without removing the gas block, but minor hand fitting may be required.
Will this work for a Colt M4-22LR?
Answer:
No it will not.
Will this work with colt sportter?
Answer:
There is more than one variant of Colt Sporter. If you have the A2 Sporter II with carbine length gas system, then this will fit. If you have the A2 Sporter II with rifle length gas system, then this will not fit.
Why does none of these products like this show the weight? Would really be useful.
Answer:
Probably only 1lb or less. Very light weight. More around 13oz
Will this fit the adams arms P1?
Answer:
Probably not. Leapers does not state that this will accommodate a piston system and this is not on the Adams Arms piston friendly handguard list. You may find better fitment with a handguard that states if fits most piston systems. Check out item # ARR-177-013.
Will this fit a Colt AR-15A3?
Answer:
Yes this should fit.
Will this fit a smith and Wesson m&p?
Answer:
There is more than one variant of the M&P AR15. This will fit the M&P Sport II with A2 style gas block (front sight is built into the gas block). If you have the Sport II with a gas block that has a short picatinny rail on top, then you may need to remove a small amount of material from the gas block or handguard to make this fit.
will this fit in place of the stock am15 handguard with the original gas block?
Answer:
Anderson makes several variants of the AM15. This will fit an AM15 with a carbine length gas system and an A2 style front sight/gas block.
Does it have a heat shield if not can you get one?
Answer:
It does not have a heat shield and is not designed to work with one. Handguards such as these rely on venting to reduce heat.
Will this fit a m&p sport 2?
Answer:
If you have the A2 front sight gas block and carbine length gas system this should fit fine. If you have a different configuration like a railed gas block then some fitting may be required.
Will this fit the palmetto state 16 m4 upper mid length and carbine length?
Answer:
Palmetto makes several variants of the M4 and fitment will depend on which setup you have. This will fit a Palmetto State 16" M4 upper that has a carbine length gas system and A2 style front sight, however, this will not fit a mid-length gas system.
Will this drop in easy to a S&W m&p 15 sport 2 without having to remove the gas block? It’s going on my fist rifle and I’m not gun savvy enough to want to do all of that. I really like the look over this handguard.
Answer:
This fit perfectly on my SW with front A2 sight literally took 5 minutes and no tools. Look for usg leapers videos about installing it. Looks and feels great.
Will this work on an FN AR15 M4 ??
Answer:
FN has more than one variant of their M4. If your model has the collapsible stock with carbine length gas system, then this will fit. However, if your model has fixed stock with rifle length gas system, then this will not fit.
Will this fit on a delton 556 carbine the fore grip is 6.75 then site frame worlk looking to extend grip to add other parts ?
Answer:
Delton makes more than one variant of AR-15. If you currently have a two-piece drop-in style handguard with carbine length gas system and A2 style front sight, then this will fit.
The length from the picatinny on the upper to the back of the a2 is 9 and 3/8 will this fit my barrel?
Answer:
No this will probably not fit. This is designed to replace carbine length drop-in handguards that are around 7" in length.
Will this fit the Smith & Wesson M&P 15 Optics ready rifle?
Answer:
No this will not fit the optics ready version without modification.
Does this work with rifle length?
Answer:
No this is only compatible with carbine length gas systems.
Will this fit on a Ruger AR 5.56?
Answer:
It should fit, however, some users report that the bottom portion of the rail may need to be modified to accommodate certain gas blocks, particularly with the Ruger model AR's.
Does this fit dams .223/5.62 carbine?
Answer:
Yes It will fit the Standard Carbine length Ar-15s.
Will this work with non iron sight gas blocks?
Answer:
It may or may not fit depending on the configuration of your rifle. This is designed for firearms with a carbine length gas system, A2 style front sight, and two piece drop-in style handguard. If you have a gas block with a picatinny rail on top, rather than an A2 style sight, some fitting may be required.
Will it go on the m&p 15 sport 2 that is optics ready?
Answer:
This will likely fit, however, some hand fitting may be required.
Will this fit an m&p15?
Answer:
There is more than one variant of M&P15 and it depends on which model you have. This is designed to fit a carbine length gas system with drop-in two piece handguard and the cutout is for an A2 or M16 style front sight.
could this be used to allow easy access to an adjustable gas block?
Answer:
Depending on the gas block you may be able to access the key on an adjustable gas block, however, there will still not be much room for clearance. Please note, this is designed to fit a firearm with a carbine length gas system, delta ring, and front end cap.
A few questions here. 1 would this fit my Ar15 with a 16 in barrel? 2 is the cutout on top meant to allow space for a m16 style front sight?
Answer:
This will fit your barrel if you have a carbine length gas system. The cutout is for an A2 or M16 style front sight.
Will this fit a high profile M- lok at 3,6 and 9 o’clock positions for a cmmg MK-3 7.62mm ar10?
Answer:
No it will not.
Will this work with a DPMS oracle upper?
Answer:
Yes it should.
Will this fit a M&P 15 with a standard gas block? No A2 sight
Answer:
It may fit but some hand fitting will likely be required.
Will this fit a smith and wesson m& p sport 2?
Answer:
Yes it will.
Will this fit my Olympic arms ?
Answer:
As long as it has a standard Carbine set up.
Will a Dead Air Sandman-K fit inside this?
Answer:
Based on the listed diameter of the Dead Air Sandman-K and the internal dimensions of the handguard shown on the second image of the product page, No. I don't think you'll be able to slip the Dead Air Sandman-K inside this handguard.
I have a s&w m&p sport 2 it have a2 front sight i have changed anything its da magpul edition will this fit ?
Answer:
Yes it should.
will this fit m&p15 optics ready?
Answer:
Yes it should.
Will this fit on a Springfield Armory Saint?
Answer:
No it will not.
Will this fit a m&p sport 2?
Answer:
As long as your M&P15 Sport II has a carbine length gas system, this will work for you.
Will this fit my DPMS Oracle ?
Answer:
It may or may not fit depending on the configuration of your rifle. Some fitting will likely be required.
I will fit a Bushmaster QRC?
Answer:
Yes it should.
Will this fit a Windham ar 7.62x39.... carbine length ?
Answer:
Yes it should!
Will this fit an Anderson Manufacturing AM-15 optics ready upper with a 16" Barrel?
Answer:
It may not accommodate the railed gas block. If it does, fitting will be required.
Will this fit on a dpms ?
Answer:
It will fit any AR-15 with an A2 front sight gas block and a carbine length gas system.
Will it fit optics ready m&p 15?
Answer:
It should but some fitting may be required.
Is this style of handguard come in 17 or 18 inches? Please advy
Answer:
No it does not.
Will it fit m&p 15 with sport gas block ?
Answer:
Yes it will.