Mil-Spec Picatinny Quad Rail handguard allows for a huge array of accessories and is precision machined for maximum strength. The two piece design replaces your original plastic handguards and locks in place for a secure fit. Rail installs easily without gunsmithing or modification to the barrel.
Precision machined from hard anodized aluminum for superior wear resistance. Four rails with 18 slots per rail includes rubber rail guards for comfort and protection.
Features and Specifications:
Manufacturer Number: MTU007
Precision machined from hard anodized aluminum
Two-piece design
Weight: 15.2 ounces
Length: 8.7 inches
Width: 2.4 inches
Height: 2.4 inches
Black
Made in the USA
Fits:
Mid-Length M4 and AR-15 style rifles with standard AR-15 gas tube. The compatibility with any special piston system is not guaranteed.
NOTE: Fits only rifles with triangular handguard cap, will not fit rifles with round handguard cap.
Includes:
Four Picatinny Rails Each with 18 Continuous Slots
Precision machined from hard anodized aluminum for superior wear resistance. Four rails with 18 slots per rail includes rubber rail guards for comfort and protection.
Features and Specifications:
Manufacturer Number: MTU007
Precision machined from hard anodized aluminum
Two-piece design
Weight: 15.2 ounces
Length: 8.7 inches
Width: 2.4 inches
Height: 2.4 inches
Black
Made in the USA
Fits:
Mid-Length M4 and AR-15 style rifles with standard AR-15 gas tube. The compatibility with any special piston system is not guaranteed.
NOTE: Fits only rifles with triangular handguard cap, will not fit rifles with round handguard cap.
Includes:
Four Picatinny Rails Each with 18 Continuous Slots
60 Ratings
Great Hand Guards
Well-built. Very Solid. Good air flow.
February 7, 2024
Great upgrade easy to install
I bought this to replace the factory handguard. It was super easy to install and is a game changer. Now I have rails and was able to add a for grip. It is now more functional and looks better.
February 7, 2024
Awesome
Best drop in quad rails for this price! I’ve got a Mid and Carbine. I’ve bought some for similar prices with wavy picatinny rails that were milled badly. UTGs are PERFECT.
February 4, 2024
Great Mid-Length Handguard
This my second UTG Pro Handguard. You can pay more , but why? Fit and Finish is excellent
January 29, 2024
Awesome.
The absolute BEST drop in quad rail in the price range. Have a carbine and mid length and love both.
January 27, 2024
Rock solid piece of KIT from a Rock solid Seller!
A solid piece of gear! Years ago I purchased a KAC rail for $400, this Leapers model is every bit as quality build as the KAC without having to pay for the name. Leapers/UTG has really stepped up their game over the last decade and I personally trust the high quality products they make. I bought this rail for a new RRA mid-length 16" barrel with a "triangle" front picatinny gas block, fit perfect and rock solid! Cheaper Than Dirt is amazing to buy from, fast shipping and affordable prices!
January 6, 2024
Amazing for its price and it fits well.
Fits PSA-15 mid length AR and any other mid length AR. It’s nice, sturdy and I like the rail covers that are included with it.
October 4, 2023
Great product!
Perfect! Just what I was looking for. Makes adding attachments a breeze.
July 20, 2023
Excellent QUAD-RAIL for attachments!
Don't hesitate to purchase this Leapers UTG PRO AR-15 Mid-length Drop-in Quad rail MTU007. fit perfect on my Del-Ton upper. MUST HAVE THE TRIANGLAR FRONT HANDGUARD ATTACHMENT will not work with a round attachment. Drop-In means just that. NO removing the front sight or anything. Comes with 16 rubber/plastic snap in tabs for heat protection on your hands when the barrel gets hot. Only down side is makes the rifle a little heavier, but worth it for the many attachment positions.
July 3, 2023
Hard to find, easy to install!
Easy and quick install. Well made, no sharp corners. Great upgrade for the money.
May 21, 2023
Leapers UTG PRO AR-15 Mid-Length Drop In Quad Rail Handguard Aluminum
Great looking, easy to install. The rubber protectors make it comfortable to hold. The price was great and the quality was outstanding. I'm very satisfied with this handguard.
April 22, 2023
Perfect fit
Nice light easy to install. Definitely I will share with friends.
April 17, 2023
Could not be happier with my Leapers UTG quad rail. Installation instructions were clear and it dropped right into place. No rattles fits my mid length AR perfect
March 10, 2023
Quad rail review
Solid piece, fits very well and easy installation. The finish is great and I like the numbering system on the rail.
March 10, 2023
Two piece drop in quad rail hand guards
Fit as they should, look good and we’re easy to install
March 4, 2023
Another quality Leapers product.
Easy install, quality product.
February 8, 2023
EXCELLENT QUAD RAIL
UTG makes Excellent Products, I also have a UTG light and handle on my AR. Highly recommend their products.
January 29, 2023
Best drop in quad rail you can get.
I have never been this happy with a drop in hand guard. The way it locks into the front and then bolts together makes this a super solid quad rail. Ill admit i was skeptical when i ordered it, but this was a great purchase.
January 6, 2023
Solid as they come
Had been meaning to throw a quad rail on my trustly lil poverty pony for a couple of years and finally got around to it this month. Got the unit inside a week of ordering it and it fits like a glove (this is a PSA mid length 1/7 "Freedom Rifle" nitride upper, 16 in barrel and triangle end cap). Solid handguard with no rattle, can't wait to finish it out with a decent light and AFG. Hard to beat this value.
December 24, 2022
Mid Length
Fits Mid legnth PSA PA-15 no problem. Not my first quad rail from UTG. Always quality.
November 3, 2022
Overall great product for a great price
Fit perfectly on my midlength rifle with triangular cap. Great price. Great product made from aluminum so it will hold up long term
October 6, 2022
Really happy with this handguard. Super lightweight, came with a bunch of rail guards, which admittedly were kind of a pain to install but are really nice when they're on, and overall looks really nice. Have it on a 16" barrel with a mid length gas system and had zero issues with fitment into the delta ring or the handguard cap. Totally recommend!
September 10, 2022
Quads
Quadrail for the Win!Expells heat better than the polymer handguards! The look is wonderful as well! And can't forget the rails for extra attachments!Most Highly Recommend!
August 6, 2022
Great Handguard for your carbine
Easy to install, looks great works very well.
July 28, 2022
Definitely makes the gun look better
Definitely going to be buying another one
June 30, 2022
Very satisfied
Easy to install and looks great!!!
May 18, 2022
Good buy
It fit perfect and looks great
March 13, 2022
Solid 2 piece railed handguard
Install was quick and easy. Rock solid. 2nd purchase of this same item. Fits triangle end plate. Would definitely buy again!
January 28, 2022
UGT drop in quad rail....you can't go wrong
This quad rail fit perfectly ,super easy installation and gives me just enough real estate for the furniture I have on it. UGT makes some great products and I highly recommend it.
December 18, 2021
Perfect fit
Absolutely easy install idiots like me can even do it
December 8, 2021
Easiest install ever. No tools. Looks great. Great product
November 26, 2021
5+ Stars guys!!!
This Quadrail is great. Easy to install and at a good price. The quality is much better than I expected it to be for the price so another very satisfied customer. Thanks CTD. Always love doing business with you guys. I’ve purchased many Gun parts from you all, so far completely happy and satisfied. 5 STARS Guys.
October 6, 2021
No More Rail Envy!
Put it on a PSA Freedom Rifle with triangle front plate. At first, I thought it was too long, but I was wrong. Once I realized the front of these hand guard more hugs the outside of the triangle plate, it was easy as pie. Don't over-think it. Tight fit and SOLID product. LOVE IT!
February 27, 2020
great rail, better than expected!
installed onto my del-ton mid length upper, went on very easy, this rail is rock solid!, it even came with 2 extra screws and rail covers! this is a very well made rail.
January 2, 2020
A great tight fit & easy install
I had to modify two inside unseen corners on the bottom piece. Just filed less than 1/16" to round over the sharp right angle corners. The top piece set in by hand although I have the proper tool it wasn't needed for much more than removing the the original hand guard.
October 19, 2018
Great looking cover
Made the gun look the part, way better than plastic!!!
May 29, 2018
Nice drop in Quad Rail
Replaced stock rail with a quad rail. Wanted to add accessories. Installed perfect with no problems. Nice tight fit. A little wider than I would have liked. Nice finish.
December 7, 2017
Can't go wrong!
I purchased this for a new Springfield Saint- the BCM Keymod handguard is just too loose and flexible to suit me so I wanted a replacement rail without breaking the bank so to speak. Arrived quickly and went on in about 2 mins without a hitch. Fit and finish is perfect, super rigid and no more Keymod rails needed as most of the "good stuff" is rail mounted. (IMO-Keymod to me is not strong enough for rough use). For the price you won't do better and I can't see spending $100+ on a rail. Excellent buy!
September 25, 2017
quad rail
very happy with the quad rail fit like a glove
August 21, 2017
Can't go wrong!
Questions to ask your self when considering this purchase. Does it have m lock capability? Check Is it easy to install? Check. Is it made with quality material? Check. Will it accommodate all your accessories for far less cash than some other higher priced rail systems? Check. Does it look cool? Check. Is it made in the USA? CHECK! Enough said. Enjoy.
July 5, 2017
This is an excellent prod
This is an excellent product. The hand guard was easy to install without the use of a delta ring tool, fits very snug with no wiggle room, and looks and functions great. This comes with 16 of the rubberized grip rail covers, enough to completely cover all 4 rails. As for the reviewer who said it doesn't fit rifles with the triangle end plate, this person was either installing it backwards, upside down, or just not inserting it properly. Great build quality, and made in USA.
November 22, 2016
Cheaper Than Dirt you may
Cheaper Than Dirt you may want to check the special consideration on the bottom of this items information page. I could be wrong, but Leapers and a review on this site both claim that this is for round handguard caps.
November 15, 2016
It fits perfectly on my a
It fits perfectly on my ar with a triangular cap. It is a pritty substantial rail for a great price. perfect for builds on a budget.
November 1, 2016
This piece fits perfect o
This piece fits perfect on my palmetto AR. Several gun shops suggested i just change the front triangle stop to the round or a floating hand rail. This was definitely more cost effective. Had no trouble droping it in, and it lined up perfectly when I screwed it together. Changed the way my ar looked. Very pleased.
October 12, 2016
I have a palmetto state a
I have a palmetto state armory PA-15 with a triangular cap. Hand guard fit perfectly. Installation is a little tricky, both sections must be slid into delta ring first. Use each section to push down on delta ring and slip into triangular cap. Overall excellent piece of hardware made in the USA.
July 13, 2016
Awesome. Fits my Rock Riv
Awesome. Fits my Rock River Arms LAR-15 perfectly. Nice and tight with no movement. Installed in minutes with no modifications.
March 15, 2016
This quad rail is a great
This quad rail is a great buy, it was easily installed and is made of good quality aluminum right here in the USA.. I would highly recommend this to anyone..
April 6, 2014
I have a Palmetto State A
I have a Palmetto State Armory mid-length upper with the triangular hand guard cap on a DPMS Lower. This rail system was an exact replacement for the stock hand guards. No fitting or gun smithing was needed. The quality of the rail system is made of good quality aluminum and the finish matches my AR's finish. Extremely pleased with this rail system and highly recommend it.
February 16, 2014
Just like the NcStar sigh
Just like the NcStar sight I bought, I wasn't expecting this to be spectacular. But I was wrong again. It took a little fitting, like the other guy said it would, but less than two minutes with a flat file fixed it. Rock solid once you screw the two pieces together with the included bolts and Allen wrench. Just use some Loctite and you'll be OK. It feels a little wider than OEM oval hand guards, especially with the rubber covers installed, and it adds some weight to the forend but for the .308 I put it on, that's not a bad thing. I say, for the money, you can't beat this rail system and it's American made (so it says). What's not to like?
December 18, 2012
I dropped this on my RRA
I dropped this on my RRA LAR-15 6.8 SPC in less than 5 min. It fits securely when installed and comes with the rail guards. Great product for the money.
July 19, 2012
I dropped this on my RRA
I dropped this on my RRA LAR-15 6.8 SPC in less than 5 min. It fits securely when installed and comes with the rail guards. Great product for the money.
July 19, 2012
Bought this to put on a D
Bought this to put on a Delton mid length kit I just built. Couldn't be happier. Installed in 5 min when you follow the directions and put the bottom in first and use the rail to push down the delta ring, popped right in. Solid fit, sturdy once screwed together. I would recommend this and would definitely buy it again. CanuFFFDt go wrong with this product.
March 9, 2012
I had to by a grinder to
I had to by a grinder to get this thing to fit, It's probably an Armalite AR 10 thing. I did get it on but It would definitely not fit my rifle without grinding down a few areas. It fits well and works well now.
November 17, 2011
Great product but not ent
Great product but not entirely designed to fit a Bushmaster ORC 308. It fit the triangle front great but I had to do quite a bit of clearencing to get it to fit around the gas tube and barrel nut. Word to the wise, it is a far from direct fit on a Bushmaster but once clearenced it fits like a champ.
October 24, 2011
This is an excellent rail
This is an excellent rail. It is well machined, and has a great price. Mine was for the triangle cap, so it worked well. It holds all accessories very securely.
October 1, 2011
Excellent buy! Easy insta
Excellent buy! Easy install and solid once tightened. No movement. Highly recommend! great price.
September 20, 2011
Just recvd this product a
Just recvd this product and had it installed on my Armalite within 30 mins. Fits tight and doesn't move at all. Had no problems w/ the triangle foregrip cap as product is made to lock up to it perfectly. I don't know why any one would spend any more than the $70 spent for this item (unless of course if you are switching to freefloat). Item is also sold as UTG part# U416MA as both part#s are stamped on rail.
August 2, 2011
THIS WILL NOT FIT TRIANGL
THIS WILL NOT FIT TRIANGLE RIFLES, when I ordered this I read carefully the description but when I got it the handguards were clearly rounded and would not fit. I have sent them back.
April 2, 2011
THIS WILL NOT FIT TRIANGL
THIS WILL NOT FIT TRIANGLE RIFLES, when I ordered this I read carefully the description but when I got it the handguards were clearly rounded and would not fit. I have sent them back.
April 2, 2011
Fits my Armalite AR-15 mi
Fits my Armalite AR-15 mid length. The stock foregrip was junk so I bought this one to accommodate my bipod. I am not familiar with the other mid length quadrail on this site for 59bucks, but this one worked great for 69. Good machine work, nice # engravings, including made in the USA. Very tight, solid fit on my rifle, I would recommend the nicer removal tool for this application. Fast shipping from CTD. I have a handle and bipod on the bottom rail with room for the plastic guard in between. With iron sights I had consistent tight groupings at 100 yards on a table with a short bipod on this rail. Very nice product.
April 2, 2011
Does this fit Springfield Saint 5.56/223 that has A2 front sight post?
Answer:
It should.
To clarify this is a two piece drop in set up that can be used with stock Delta ring and A2 front sight?
Answer:
Yes it is.
Will this fit the PSA M4 upper with the standard hand guard and heat shield ?
Answer:
Probably not. A "standard M4" has a carbine length gas system. This is for a mid-length gas system. It depends on the length of your gas system. If your rifle has a mid-length gas system and requires a drop in handguard, this will fit. If your rifle has a carbine length gas system, it won't.
Will this fit a psa ar15 upper?
Answer:
If it has a mid-length gas system that requires a drop-in handguard it will.
Whats the length?
Answer:
This item is 8.7" long.
I have a diamondhead upper which is all metal handguard. I would like to replace something with aluminum. What handguard should fit?
Answer:
If your upper has a mid-length gas system and triangular front end cap, then this will fit. If you have a free float one piece handguard, then this will not fit and you should check out item # ARR-398 or 110716.
I have a PSA AR10 its a mid length gas system, will this fit ? Thank you in
Answer:
If your rifle has a triangular front end cap, then this should fit. Please note, this will not fit a circular front end cap.
Will this fit a bushmaster patrolman, m4?
Answer:
Probably not. This is for a mid-length gas system. The Patrolman has a carbine length gas system.
Will this fit the colt AR15 with triangle cap and 20 barrel?
Answer:
It will depend on the length of your gas system. This will fit a triangular front end cap, but this will only fit if you have a Mid-Length gas system.
Will this fit springfield saint ar15?
Answer:
That depends on exactly which model Springfield Saint you have an it's current configuration. This will fit any AR-15 with a mid-length gas system that is configured to accept a drop-in handguard.
I have a triangular front cap and this doesnt fit. Any tips ?
Answer:
Yes. Get a handgaurd removal/installation tool. This handguard is specifically designed to ONLY fit triangular end caps. Delta rings can be difficult to collapse enough to get proper fitment without some leverage. See item# ARR-833-028
Will this fit a Deyra/Rock Island tm22?
Answer:
No probably not. You may want to contact Armscor directly for compatibility information.
I have a BCM standard 14.5 mid length gas with a A-frame front sight . Would this fit ?
Answer:
If you currently have a two piece drop in style handguard, then yes this will fit.
Will this work with a colt m4 carbine?
Answer:
No this will not fit.
Will this fit my Delton 316 L?
Answer:
If you add a front end cap and delta ring assembly to your upper, then this should fit. However, you could also add picatinny rails to your existing handguard. Check out item # 2-GTSW239 or 144783 or 2-GTSW241.
Well this fit a High Satandard AR 15?
Answer:
This will only fit if you have a mid-length gas system that requires a two piece drop in handguard. It will not fit the more common carbine length gas systems.
Can this be suited for ar9?
Answer:
It probably would not be a suitable fit for most AR-9's on the market. If you need additional assistance you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
Color?
Answer:
This handguard is black.
I have a 16 inch barrel on my ar, will this fit it? If not can you recommend one that will? I'm having difficulty finding rails that fit triangle front caps.
Answer:
Triangle end caps usually indicate a mid-length gas system. This should fit fine.
Will this fit s w ar 15 5.56 sport 2 optic ready model?
Answer:
No it will not.
Can this replace a magpul moe sl hand guard on an aero precision mid length upper with an A2 front sight?
Answer:
Yes it can
Is there one of these that fitsBushmaster XM15-E2S with a 20 inch barrel?
Answer:
Bushmaster made a couple variants of the E2S. If your model has a carbine length gas system with a handguard about 7" long, then I recommend item # ARR-238. If your model has a rifle length gas system with a handguard about 12" long, then I recommend item # 10563.
Would this fit on my bushmaster m4 m15 ar?
Answer:
Only if you have a mid-length gas system that requires a drop in handguard. It will not fit the more common carbine length gas systems.
Will this fit a bushmaster qrc?
Answer:
No Try item Arr-238
I have a mp sport 2 carbine. I would like to use this hand guard, what type of gas system should I use?
Answer:
Your firearm has a Carbine gas system. You would have to change the barrel in order to change that. However Item number ARR-238 will fit your firearm.
Will this fit the delton sport ?
Answer:
No, the Delton Sport has a carbine length gas system. I recommend item # ARR-238.
Will this fit dpms oracle upper ?
Answer:
No Try item Arr-238
Will this fit an sig saur M400?
Answer:
No this will not fit. The M400 uses a proprietary barrel nut compatible with free float barrel systems.
Will this fit on a Springfield Saint AR-15??
Answer:
There is more than one variant of the Springfield Saint. If your model has a mid-length gas system with a two-piece drop-in style handguard, than this will fit.
Will this fit a Windham MPC RF?
Answer:
No, you need a carbine length gas system. I recommend item # ARR-238.
Will this fit a KS-47?
Answer:
There is more than one variant of the KS-47 and several of these models come with free float handguards. If your model has a mid-length gas system with a two-piece drop-in style handguard, than this will fit.
How is this forearm fastened to the rifle?
Answer:
This is a two piece drop-in style handguard. It is held in place by the delta ring and the front retaining cap.
Will this fit on my delton ar15?
Answer:
If your Delton AR15 currently has a mid length two piece drop-in style handguard, than yes this will fit.If you would like additional assistance you can reach our product techs Monday thru Friday from 8am to 5pm central time at 1-800-421-8047 or by using our live chat feature.
I want to moumt a 2" diameter can x 6" length. what is thenside diameter of this rail ?
Answer:
This handguard cannot be mounted around a can. This is a two piece drop in handguard that is held in place by a delta ring and front end cap.
is this an MLOK?
Answer:
No it is not. This is a picatinny quadrail.
I have a Rock River arms AR-15 mid-length. My question is the front end the cap is triangular while the tensioner closer to ejector port is round. Thank you for your help.
Answer:
The delta ring is at the end of your receiver, the end cap is near your gas block, this handguard fits triangular end caps only
Will this fit my California spec S&W AF-15
Answer:
If it uses a mid length gas system, delta ring, and triangular handguard end cap it will.
Will this fit a M&P Smith&Wesson AR 15 Thanks
Answer:
If it uses a mid length gas system, delta ring, and triangular handguard end cap it will.
Will this fot a ruger AR model 8503? Do you have a similar part with 4 rails in tan? Thanks in advance
Answer:
It will fit if you have a mid length gas system, delta ring, and triangular handguard end cap.
Will this fit a M&P 15
Answer:
Only if you have a mid length gas system
Will this fit my armalite M15?
Answer:
It will only fit mid length gas systems with a triangular hand guard end cap
Will this fit a savage msr 15 patrol? If not do you know of any quad rails that will?
Answer:
It will fit if you have a mid length gas system, if you have a carbine length gas system you will need a carbine length rail.
Will this fit a Ruger AR-556? Thanks.
Answer:
Only if it has a mid length gas system
Will this product fit my Anderson AM-15
Answer:
Only if it has a 2-piece mid-length handguard and triangular handguard cap.
Can this rail fit my FNH 15 M4 Military collector?
Answer:
No it will not. Check out item # ARR-238
Will this fit Rock River AR 15 with A2 front post?
Answer:
Probably not... It depends on your model, but the Carbine length is far more common among drop-in handguards. Check out item # ARR-238
Will this fit Springfield Saint AR replacing it's B5 M Lok mid length handguard?
Answer:
Yes
will this fit a savage msr 15?
Answer:
No it will not.
will this fit S&W M&P Model 15
Answer:
No it will not.
Will this fit my bushmaster XM15-E2S
Answer:
No it will not. Item ARR-238 will fit.
will this product fit my armalite M15
Answer:
If you have an M-15 with a 9" polymer, two-piece handguard, yes.
Does this fit a Ruger AR 556?
Answer:
No, this is a Mid-length hand guard, I'm only aware of current Ruger production rifles featuring a carbine length gas system. Try item ARR-238.
Will this fit the Aero Precision AC-15 mid length?
Answer:
Yes it will.
will this fit my dpms oracle?
Answer:
No, it will not. Item ARR-238 should fit.
Does this rail work with a fixed A2 from sight post?
Answer:
Yes it does.
Does it work with a fixed A2 front sight post?
Answer:
Yes it does.
Will this fit a bushmaster o.r.c
Answer:
No, it will not. Item ARR-238 should fit.
Will this fit a PSA classic mid length upper? Just not sure if my AR has a round cap or a triangle one. Thanks.
Answer:
It should fit. Triangle is the standard for mid length these days.
Cant tell from the picture. Are the 2 holes at the ends pictured on the top rail for use with QD quick release sling swivels?
Answer:
No, they are not.
Will this fit a 11.5 Delton AR pistol upper w/ FSB sights?
Answer:
No it will not. Item ARR-238 should fit.
Will this fit a Springfield Armory Saint? And if not could you please send a recommendation? Having problems finding one. Preferably a quad rail.
Answer:
Yes, it will fit.
Will this fit a del-ton complete upper, With a 16in barrel?
Answer:
No. This is for mid-length gas systems. The Del-Ton will need the carbine length, item number ARR-238
Will this drop in fit on a Smith and Wesson M&P 15 that came stock with the Magpul MOE mid length handguard? Looking to swap it out so I can have a standard picatinny rail
Answer:
No it will not. You will need a triangular front handguard cap for this to fit.
Will this fit my PSA Gen II PA-10 with 18" barrel and standard plastic handguard that measures 8.665" long? Thanks
Answer:
No, this is for AR-15 rifles only.
Will this fit a Stag Arms 15L ORC?
Answer:
No. You need a carbine-length quad rail like the Leapers UTG PRO AR-15 Carbine Length Drop-in Quad Rail, item number ARR-276-020.
Is this hand guard m-lok compatible?
Answer:
No, it is not.
Will this work on my Windham Weaponry SRC AR-15?
Answer:
No. The SRC has a carbine length handguard. Item ARR-276-020 will fit.
Does this have the 4 set screws to hold this secure?
Answer:
All mounting hardware is included.
Is this a free float hand guard ?
Answer:
No, it is a two-piece drop in design.
Will this product work on the aero precision AC-15 mid length complete rifle?
Answer:
It will fit any mid length rifle with a triangular handguard cap.
What is the color on this product? It says black in the description but the picture looks more like a grey. My gun is dark black and want it to match. Thanks for your help!
Answer:
It does look grey in the picture, but this Quad Rail is anodized black.