When it comes time to upgrade your current set up take a good long look at Leapers UTG. Leapers UTG gear is well made using high quality components and utilize modern design and manufacturing process to ensure shooters have the very best gear for duty, defense, competition, recreational, and all other shooting venues. This high quality handguard is MADE IN THE USA, and is comparable to much higher priced handguards. Regardless of the need, Leapers UTG has the right gear to keep you up and running.
Features and Specifications:
Manufacturer Number: MTU001SS
Precision Machined from Aircraft Aluminum
Lightweight, Slim Tubular Profile for Positive Handling
Top Rail Extends to Upper Receiver for Continuous Mounting Platform
Simple and Friendly Installation, No Gunsmith Required
6.9 oz
7.28"x1.89"x2.17"
Black Anodized
Made in the USA
Fits:
AR-15 with Standard Delta Ring Assembly, Barrel Nut and Round Handguard Cap
Includes:
Two removable two-Slot rail sections and Two removable four-Slot rail sections for 3, 6 and 9 o'clock positions
Unconditional Lifetime Warranty
Features and Specifications:
Manufacturer Number: MTU001SS
Precision Machined from Aircraft Aluminum
Lightweight, Slim Tubular Profile for Positive Handling
Top Rail Extends to Upper Receiver for Continuous Mounting Platform
Simple and Friendly Installation, No Gunsmith Required
6.9 oz
7.28"x1.89"x2.17"
Black Anodized
Made in the USA
Fits:
AR-15 with Standard Delta Ring Assembly, Barrel Nut and Round Handguard Cap
Includes:
Two removable two-Slot rail sections and Two removable four-Slot rail sections for 3, 6 and 9 o'clock positions
Unconditional Lifetime Warranty
11 Ratings
What's not to like?
The slim profile makes it very comfortable to hold. It enables me to put rails just where I need them. Very easy to install, and the price is unbeatable if you're looking for this type of handgard.
June 29, 2022
PERFECT AR ACCESSORY
I REALLY LIKE ITDESIGN & APPEARANCE IS VERY NICE, GOOD QUALITY & PERFECT FIT!
August 23, 2021
PERFECT FIT!
This UTG quad rail was ordered to replace a standard heat shield on my AR and fit perfect. I found that this particular rail was slightly smaller than the stock, which was awesome! No low profile gas block needed either. Pros: Price
May 9, 2018
Super clean look, super easy install
Ordered Saturday got here Thursday. Had it on in 15 minutes. Looks a lot better that the cheap plastic AR handguard
May 3, 2018
Bought this for my M&P 15
Bought this for my M&P 15 Sport II, wasn't sure what to expect considering that UTG has a less than stellar reputation. Received item very quickly, surprised to see it is made in USA (bonus) and the rail sections are great(metal),,installed in less than ten minutes, and boy was I impressed no wiggle at all, top rail lines up perfectly,what more could you want for the price? Finnish seems good, but really don't know if it will stand the test of time,it's ok if it doesn't, black BBQ paint will fix
August 18, 2016
This item is perfect!! it
This item is perfect!! it gives me the continuous rail I was looking for to mount my scope and back up sights. It's a breeze to install and of course CTD delivers fast!!! I also like the fact that it comes with rail covers. Nice, sturdy, and inexpensive add on to my Bushmaster AR-15!!!
June 12, 2016
It's slim and light for s
It's slim and light for sure. I bought this to replace a quad rail. With a red dot and magnifier I needed to lose some weight in the front to gain some balance back and this did the trick. I haven't shot it yet and I'm a little concerned about the size of the vent holes and how much heat will dissipate into my bare hand, but that can be fixed with wearing gloves or installing a front grip. After I installed this, I don't feel any need to switch to a free-float rail or replace my A2 front sight.
May 1, 2016
If you want a continuous
If you want a continuous top rail with the flexibility to add rails only where you want them,this is the product for you.Mounts solidly and the slim profile feels good in the hand. UTG has stepped it up with this product.
February 4, 2015
I purchased this for my B
I purchased this for my Bushmaster BFC-15 to change regular handguard. After install this UTG Super Slim Handguard,my AR looks so much better than before. But I recommend to use 'Handguard Removal Tool' for protect your finger.
August 10, 2014
Got this for my new M&P 1
Got this for my new M&P 15 Sport. I used a delta ring tool and followed the included instructions - easy and perfect fit! This handguard is slim, so I am not sure if others will like it, but it works for me. It is very clean and sleek!!!
May 11, 2014
I purchased this handguar
I purchased this handguard to replace the stock 'glacier guard' on my DPMS upper receiver and tried to do as much research before-hand to make sure it was going to fit properly. I was VERY impressed with the quality of the product and the install was quick and painless. It took less than 5 minutes to install and it fits perfectly!
May 7, 2014
Can more rails be added?
Answer:
This handguard includes two small detachable picatinny rails and we do have additional compatible rails available. Check out item # 16-MTURS02M.
will this fit s&w mp sport II WITHOUT REMOVING SLING SWIVEL?
Answer:
This handguard will fit an M&P Sport II without removing the gas block with built in QD cup for slings.
What gas block does it need?
Answer:
This is a carbine length drop in handguard. It would be compatible with any gas block. Per the written description: Fits: AR-15 with Standard Delta Ring Assembly, Barrel Nut and Round Handguard Cap.
Will this rail work on a Colt AR with a Mil Spec, spring loaded nut?
Answer:
Yes
Will this fit a piston driven AR platform?
Answer:
No it will not.
will this fit a ruger ar 556?
Answer:
Yes
Can my Magpul m lok vertical grip fit on this?
Answer:
No. This is not M-LOK
Will this handguard fit my M&P 15 Sport 2 optics ready? It has a railed gas block, same level as receiver
Answer:
Yes it will.
Will this fit my Bushmaster orc
Answer:
Yes it will.
How many rails does this come with and what sizes are they?
Answer:
As per the descriptions; "Two removable two-Slot rail sections and Two removable four-Slot rail sections ".
Will this fit my doms ar 15?
Answer:
This fits almost every AR-15 with the standard, polymer, two-piece, carbine hand guards.
Is there a QD mount that attaches to the side of this other than one that goes on a picitanny rail? I understand it's not Mlok compatable but hoped there was a way.
Answer:
It comes with Picatinny rails that can be added anywhere you like. That can be used to add a mount. It can't be added direct to the handguard.
Will this fit smith&wesson m&p 15
Answer:
Yes, this will fit the S&W M&P15.
Will this handguard fit my S&W M&P AR10 sport with the 16 inch barrel? If not does Leapers utg make one this style for the AR10?
Answer:
No, this would not fit. They don't make one this short for the .308 platform.
Can you attach a vertical grip or an angled grip to this?
Answer:
Yes you can.
Is this a mlok handguard?
Answer:
No it is not.