Replace your standard AK wood handguard set with a UTG PRO precision CNC machined quad rail. This tactical aftermarket upgrade has four mil-spec picatinny rails that allow you to personalize your rifle with a variety of accessories. UTG manufactured these from aircraft grade aluminum with a hard coat anodized black finish for ultimate strength and durability. You will have the confidence to run your rifle hard at the range without fear of inferior components failing. UTG also machined swivel sockets into both sides of the handguard to give you plenty of sling mount options. This quad rail system comes with rubber rail covers that not only insulate your hands from heat but also provide a comfortable grip while shooting. Installing this rail is as simple as following the included instructions and does not require any gunsmithing. Modernize your stock AK with this high-quality tactical handguard from UTG.
Features and Specifications:
Manufacturer Number: MTU009
AK Quad Rail Handguard Set
Mil-Spec Picatinny Rails
Integrated QD Sling Swivel Sockets
Precision CNC Machined
Rubber Rail Guards Included
Overall Length: 8.43"
Height: 3.1"
Width: 2.05"
Weight: 9.2 oz
Material: Aluminum
Color: Black Anodized
Made In USA
Fits:
Romanian, Bulgarian, Chinese, US, and Similar AK Variants
Lifetime Warranty
Features and Specifications:
Manufacturer Number: MTU009
AK Quad Rail Handguard Set
Mil-Spec Picatinny Rails
Integrated QD Sling Swivel Sockets
Precision CNC Machined
Rubber Rail Guards Included
Overall Length: 8.43"
Height: 3.1"
Width: 2.05"
Weight: 9.2 oz
Material: Aluminum
Color: Black Anodized
Made In USA
Fits:
Romanian, Bulgarian, Chinese, US, and Similar AK Variants
Lifetime Warranty
Easy to put in great quality material a solid piece.
February 13, 2023
Romanian full size draco
Fits perfect on my Romanian full size draco. Can't wait to test it out on the range.
March 25, 2022
Good fit
Beautiful fit for my wasr-10.
October 19, 2021
Works very well for my setup
The rail was easy to install. Recommend blue loctite to lock down screws. I mounted a red dot on my Romainian parts kit ak and it holds zero nicely. The rubber grips help with the heat. Pros: Easy to install
April 20, 2020
Excellent upgrade for my Romanian SAR-1
Very easy install and an awesome improvement on my Romarm SAR-1.
May 20, 2018
It didn't fit my ARS 47
Quality seemed fine, unfortunately it did not fit my ARS 47 well at all. I had to return it. Customer service was good.
March 11, 2018
Awesome, I put this stock
Awesome, I put this stock on my wasr 10 and it looks amazing is super snug no wiggle and it went on in a snap didn't even need the directions, I love it and even after a few hundred rounds its still tight as can be and performing super well
March 8, 2017
Simply perfect. Light, ro
Simply perfect. Light, rock solid, easy installation, and is just high quality all around. Very satisfied with this purchase, 100% worth it!
September 2, 2016
Installed on Norinco Mak9
Installed on Norinco Mak90, fit perfect, no mods, no issues! Feels great, works perfectly.
June 8, 2016
Cheapest place I found al
Cheapest place I found also one of the only places that had the part on order.quick delivery and makes the gun look so much better!
March 4, 2016
Looking for rail mlock for century vska thank u
Answer:
Hi Robert! Are either of these products what you're interested in? 1. https://www.cheaperthandirt.com/midwest-industries-gen-2-ak-47ak-74-universal-hand-guard-m-lok-compatible-rail-top-cover-6061-aluminum-matte-black/fc-816537013365.html 2. https://www.cheaperthandirt.com/magpul-moe-ak-47ak-74-handguard-m-lok-black/fc-840815100294.html
Looking for something to fit the Arsenal SLR 107F -AK. The model 70 quad rails did not work. Please advise?
Answer:
THis will fit.
Will this fit a arsenal ak-47 slr-95?
Answer:
It should, but some hand fitting may be required.
Will this fit a palmetto Gf3 ak47m?
Answer:
Yes this should fit. Minor fitting may be required.
?Is this good to use on a hellpup?
Answer:
It depends on which Hellpup you have and the distance between the end cap and front sight. You may find better fitment with a handguard that does not have an extended rail. Check out item # 2-FABFX-AK47B.
Will this fit a BFT pistol, 12 in barrel length, part number HG7416-N... ?
Answer:
Yes it will.
Does this fit a rak 47 riley defense?
Answer:
Yes this will fit. Please note, minor fitting may be required.
Will this fit a Hungarian Feg Sa2000m?
Answer:
If it has been converted to accept standard AKM handguards, then yes this should fit. Minor fitting may be required.
Will this fit the PSA AK 104?
Answer:
Yes this should fit, however, minor fitting may be required.
Is this upper and lower handguards?
Answer:
Yes this is a two piece handguard.
whats a good tactical scope for this?
Answer:
I would go with a long eye relief scout scope. Something like item# 16-SCP3-274LAOIEW
Would this fit a Zpap85?
Answer:
No it will not.
will the fit the hellpup?
Answer:
Yes it should. Minor fitting may be require.
Will this fit my Arsenal sam7k?
Answer:
Yes it should. Minor fitting may be require.
Will it fit a century vska ?
Answer:
Yes it should. Minor fitting may be require.