AR-15 Vertical Tactical Foregrip Black Leapers UTG 5" Length Battery Storage Ergonomic Ambidextrous RB-FGRP168B [FC-4712274522503]

Picatinny mounting deck to slide on and screw tight.
Ergonomic finger grooves for most comfortable grip.
End cap conceals AA or Lithium battery storage compartment and controls grip mounting.
Side grip panels remove to allow ambidextrous mounting of pressure pad.
5" length.
Black

Pair up this vertical foreward grip with our matching quad rail (ARR-238) , six position collapsible stock (ARR-008) , pistol grip (ARR-331) or four position collapsible stock (ARR-007) from UTG.

Unconditional Lifetime Warranty

237 Ratings

5 out of 5 stars

237 Ratings

Rated 5 stars by 100% of reviewers

Rated 4 stars by 0% of reviewers

Rated 3 stars by 0% of reviewers

Rated 2 stars by 0% of reviewers

Rated 1 star by 0% of reviewers

I love these grips! Will buy again

January 29, 2024

This thing is a lot bigger than I expected it to be, but that’s not a bad thing. I have big hands and it fits nicely. I ordered a couple of these and love them! My only hang up is that the pressure switch for one of my lights did not fit the way it was meant to and I had to tape it to the handguard. Not a deal breaker, but it would have been cool if it fit.

August 7, 2023

Perfect fit and extremely well made. I purchase along with the self-mounting rail and it's a great combo for anyone wanting just a single rail to mount a fore grip. Highly recommend.

July 12, 2023

Great! Easy install and fits perfect.

June 24, 2023

Works great very easy install

June 19, 2023

I like it so much, there are nicer foregrips but not for this price

May 15, 2023

Well manufactured, Comfortable grip. Looks and feels great when mounted on your weapon. I mounted it on My bullpup shotgun it ,works great.

April 16, 2023

Works well I like the fit and the extra compartment is nice also

April 5, 2023

Quick and simple attachment. Works great

March 8, 2023

Great item feels great for the grip and does exactly what I wanted.

February 26, 2023

Looks like the picture showed. Fits nice and snug on the rail. I like how it has the removable pieces for pressure switches. Will totally get another one for my next gun.

February 17, 2023

Looks good on gun and feels right in hand

February 8, 2023

The grip is great the only thing I see wrong with it is that it does not have a bolt that goes through the rail just a round bump that goes into the slot that broke on the first shot. Decent for price but needs a bolt.

November 22, 2022

Good product. Fits nice

August 10, 2022

The Utg verticle foregrip is sturdy and easy to attach. I have had a good experience with it at the range. I own two of them now.

July 6, 2022

Good choice for the money

June 28, 2022

Looks nice and at a good price..!

May 22, 2022

Good product for the price. Went on and locked into place with no issues.

April 3, 2022

Comfortable and solid. Heavier than you’d expect but I like it nonetheless. 10 outta 10

February 4, 2022

It was not as ergonomic as I thought and I stuck with my bcm which fit my ar 15 much better and provided a much sleeker look.

December 21, 2021

This is a good addition to your AR platform. It is sized right to provide a steady shooting position whether you are shooting unsupported or with a bipod. The price is right and the extra storage is nice to have.

November 18, 2021

Solid product and easy to install and is light weight. Highly recommended.

October 21, 2021

Great sturdy and strong grip. Easily attaches. One BIG con for me, I tried to put my pressure switch in BUT the pads will not allow it. They don't fit in it-not enough room for it and then to put the plates back on. Really scks cause that's why I bought it! Pros: Strong and Sturdy Cons: Pressure Pads Won't Work With Pressure Switch

June 23, 2020

Great product, great price, CTD rocks!

May 18, 2018

Very pleased with this grip. Easy to install and comfortable once on. Pros: Cost

March 15, 2018

Bolts up tight zero slop. Very straight forward and the pressure pad fits snug and accessible. I have zero complaints and the price can't be beat

January 14, 2018

This foregrip is everything you could think of that you might want. By fr the best you can get for the money.

September 19, 2017

If you are looking for a decent grip at a decent price go crazy. Not as sleek as I would prefer doesn't come with screws to help it tighten but does the trick with just the big place screw piece came quickly so I gave it 4 stars

June 18, 2017

I do like it.. for the price you cannot beat that .. is working fine, is little bit bulky but is okay

February 15, 2017

Grip is okay but didn't suit my tastes. It's a bit heavier than I expected and it's a bit thicker than I had hoped. The finger grooves okay but kind of force you to hold your hand inline with the grip which isn't all that comfortable in my opinion. Pressure pads are nice but, at least on mine, the cutouts didn't fit flush on the grip.

February 2, 2017

Purchased this foregrip along with a Leapers quad rail hand guard, and am very pleased with both. The foregrip attached to the picatinny rail very solidly, and the ability to insert a pressure pad and store extra batteries are very nice features, making this by far exceed my expectations for the price of the part. However, I would be just as happy with this foregrip if it cost more. 5/5 for the part, 6/5 for CTD customer service.

November 22, 2016

Nothing bad to say about this foregrip. Awesome price. Great feel. Really gives me that extra control needed for close quater quick shots or that little extra stability for further shooting couldnt ask for more from it super durable as well

October 8, 2016

I am personally a fan of Leapers products but this one is a bit out of touch for me. It attaches great onto my rifle but it's far too big for me.(I can't fit it into my soft case without removing the tightening peice) I gave it four because some of that was my fault. CTD did a great job. It's built solid and feels good. But if your looking for something sleek, this is not.

July 12, 2016

Great grip for a great price. Enough said.

July 10, 2016

4 Stars because it's heavy enough to double as an impact device. Overall very sturdy, stout, and quite long. I cut mine down, removing everything below where you're ring finger goes, and figured out another way to attach it to my rail. That's just me, though. At this price they couldn't do it wrong as long as it doesn't snap in two, which this surely won't.

June 22, 2016

Great grip for the price. It's a grip with much needed storage. What else can I say!

November 17, 2014

For the price, this foregrip cannot be beat. It's lightweight, mounts quickly and easily, and it's really comfortable. It also helps in creating a more stable shooting platform. Overall I would recommend this to anyone in the market for a fixed-position foregrip.

August 10, 2014

I bought this foregrip as a replacement to the old one. I like the feel of the grip, the storage compartment within the grip is awesome, and the pressure pad slots is exactly why I chose this grip. Feels and looks great, great quality and very sturdy.

July 8, 2014

This foregrip has an excellent size to it. Not to small in the hand, not to large. Also looks good. locks down tight, and if you can't finger tighten it to your liking the notches on the end cap allow you to get a vice grips on it to finish it off.

July 5, 2014

This is a great grip for the price and love the storage it offers

June 23, 2014

This is a very well made foregrip that fits perfectly in my hand.

May 31, 2014

Very happy with this grip! I was worried after initially ordering that it would not fit on my WASR-10 and still allow me to feed a high capacity magazine. Fortunately, there is no conflict!. I can still use 30rd mags with no issue at all. Grip attaches very secure and fits the hand well. Would recommend this to anyone.

April 23, 2014

This grip is solid and has a great feel. Not to mention, it has a pressure switch slot for accessories as well as battery storage. I liked the grip so much that I wanted to submit a review. I would highly suggest this grip, especially for the price!

April 7, 2014

Another good UTG product and for a low price I would recommend to anybody looking for a simple grip with storage capacity.

March 7, 2014

Got this grip in 3 days even though I paid for the cheapest shipping that would specified it would take a week. The grip is VERY durable. The battery compartment can hold 2 AA or 3 lithium batteries, comes in handy for when your in the field and need a quick change of batteries for your scope or flashlight. Its feels comfortable and natural to hold with the finger grooves in the grip.

February 12, 2014

This grip is soooo nice comfortable and easy to install on your rail. Well done.

November 2, 2013

very good foregrip, i used vise grip to tighten down, i have a sissy grip lol, love this grip, will be ordering more later for other guns

January 25, 2013

It is a good grip for the price. Can't beat it. Thank you, CTD.

January 3, 2013

Bought this to put on a 9 in quad rail from UTG. Fits perfectly and doesn't need an Allen wrench, or any kind of wrench for that matter, for it to be on the rail. A little twist on the bottom is all it takes. Would buy another if I had another AR.

October 15, 2012

Fit great, which was expected, since my rail is also UTG. Perfect size for me to get a good grip.

July 26, 2012

I have this on my new AR-15 and it works very well with the Midwest Industries quad rail. UTG, like always, did not disappoint. I would like to try a collapsible grip with a smaller profile when on a sling or in case, but this will work for now.

April 24, 2012

Bought this a little while back for my Double Star AR chambered in 5.56. Easy to attach and secure. It holds tight to the rail and doesn't even flinch when I fire multiple shots quickly. Great grip and fits my hands perfectly. Highly recommend.

April 16, 2012

Bought this item on Tuesday, along with the UTG quad rail, and they came in on Friday. This grip is wider than I would like it to be, but is very sturdy. That is the only reason it has 4 bullets. Shot about 100 rounds on Saturday and it held with no problems. Even dropped it on the ground on accident, and it still held strong. Looks great on my custom AR-15. I LOVE UTG products and Cheaper Than Dirt!!!

April 7, 2012

Sure this item is very quick to install and has a good price, but the attachment is very flimsy. Doesn't feel solid. Very unsteady.

January 12, 2012

Believe it or not, this is an excellent foregrip. I've used many other foregrips before, especially in the military. This is by far one of the best. It's simple, durable, well constructed, and comfortable. The battery compartment is useful if you're running EOTechs, Flashlights, lasers etc. The grip is a bit wider than most for better comfort, especially in larger/longer hands. And it secures snugly into the rail system. Can't beat the price.

December 23, 2011

Very easy to add on to the Picattiny rail seems to make it easier for to raise and shoot.Good choice.

December 13, 2011

Put this on an M&P 15. It has survived several hundred rounds without even budging. Its fairly beefy which is good for me since I have big hands. No complaints so far.

November 4, 2011

Got my order next day. This went on my Sig 522 SWAT pistol, and it works great!

July 26, 2011

Received quickly and went right on my weapon.

July 2, 2011

Fits well. Thank you.

June 22, 2011

Ive been parusing the net for the last 2 days looking for the best foregrip I could find, and this one is it. Some say its weight is a factor, but anything you add to your rifle is going to make it heavier. SOLID construction and design. I got 2 of these, one went on my DPMS Panther, rock solid onto my quadrail, and the second to the tactical pump on the 870 Supermag. Easily detaches and reataches to any picatinny rail system. The bottom unscrews to a huge storage compartment, O ring sealed. If your looking for a sturdy, affordable forgrip, then stop looking, because this is it.

May 26, 2011

Attached this to my Bushmaster AR-15(A3M4) on my UTG rails and it fits snugly and does not move. The construction seems solid, but I have yet to test it in prolonged shooting. Overall, for the price, it is definitely a good deal so far.

May 17, 2011

Got mine in the mail today. Goes great on my DPMS .308 oracle. Its true that this item adds a little more weight but I dont mind because I am used to FAL's and M1A's. Great product and well made. Might not be suitable for someone with small hands. Thanks CTD

May 16, 2011

Got this item along with the UTG Quad Rail System for my Bushmaster. Talk about a well made item.. It's great.. Adds alittle more weight that I would like to have, but other than that it's fine.. The handle is stable, with no play and it fills your hand..

April 21, 2011

A little loose but I dont mind, all in all its worth the money.

April 19, 2011

Works great. It adds a noticeable amount of weight but its well worth it. Works great w/ leapers bipod.

April 6, 2011

Well, it works, it doesn't cost a ton and it looks pretty good. It smells funny when you open it though. haha. Its a bit big but oh well.

April 6, 2011

This thing is plastic. Upside light, downside sort of cheap. Mine did not break or anything mounted on my AR but I bought the UTG with built in flashlight which is 3 times the price but about 1000 better. If you want to go cheap and get this one email me and l will sell you mine for 5 bucks.(when its in your hand that is about how much it feels like it is worth)

April 3, 2011

Love it! The thumb screw makes it super easy to move around on your rail but secures it enough that there is no wiggle. I just love it! I'm planning on getting the low profile one also. As always another great transaction with CTD, Thanks CTD.

March 31, 2011

DO NOT BUY THIS PRODUCT if you're intending to mount this on an AK, 12 guage shotgun, or any kind of 30 cal rifle. The nipple WILL break off. It'll probably be fine if mounted to a .22 or even a .223 (wouldn't risk it though). This grip cannot take a beating, so be very careful with it.

March 29, 2011

I put this on my AR-15. Very happy with the item. Light, sturdy, and easy to slide on the quad rail. Extra storage in the bottom for batteries for my LED flash light and red dot system.

March 15, 2011

I've had this grip about 6 months now. I've used it on an SKS, Sig 556, and an SR-22. It is the best made grip I've ever ever used. High quality aluminum and perfect size. It mounts easily and has a large capacity waterproof storage compartment as well. I'm ordering another one for my rifles!

March 3, 2011

Bought this foregrip a couple weeks ago and just took it to the range. It worked great with the UTG quad rail. Item # ARR-238. Fit is very solid with no play.

March 3, 2011

Bought this for my S&W M&P 15-22 and it is easy to attach and detach while holds tight with no movement. Great grip for the price.

February 19, 2011

Anyone with big hands will love this grip. The price is hard to beat. If you don't need a grip that holds batteries, try this one. It goes on solid and stays solid. Great product for the money.

February 19, 2011

I'm not a Tier 1 Operator, so I don't need a hundred dollar VFG. That being said, this is a nice grip. It secures tightly to my rail, and holds the tape switch for my light just fine. As others have said, it IS a little fatter than some other VFGs. I like the way it fills my hand though, so it works for me. Overall, I'd say, unless you're doing HALO jumps from the Space Shuttle, BUY THIS GRIP.

February 9, 2011

I received this item today and bolted it directly to my DPMS Panther AP-4 that also sports the UTG Carbine length Quad rail and a Stream light TLR-1 light. While this product does add weight to an already front heavy Carbine, I can hardly find a reason to complain. The material, machine work and finish on this piece are all top notch, and I prefer the metal construction to the mountains of polymer parts out there. This grip is big on the outside and fills an average hand quite well; the internal storage has enough room to hold 2 AA Batteries side by side or 2 CR123 vertically and has plenty of room to pack cleaning patches in to eliminate noise. It can also accommodate a spare bolt, several pins, small parts or 7 extra rounds of 5.56 X 45MM ammo. Lastly I once again have to complement Cheaper Than Dirt on the Quickness in which my order was received and delivered, placed on Wednesday at 0200 hours, on doorstep Friday at 1200 hours.

January 28, 2011

I used this forgrip on my M4 carbine in Iraq. It felt comfortable but the pressure switch area is too small for military pressure switches (PEQ-15, TAC lights etc). It was durable and stable enough to use as a stand alone monopod while shooting. The compartment is water/dust tight and is great for 123 batteries or similar accessories. I also have a SIG SWAT 556. The grip wouldn't slide on the rail. I had to force it on, but it stayed where I needed it once I secured it. This is why I give it 4 stars instead of 5.

January 20, 2011

Don't be fooled by the name, this grip works on any Picatinny rail.Using this on a MAK-90 it gives the rifle a completely different feel. I mounted a pressure switch for a light and works awesome. This is highly recommend for any one who wants a basic grip. I didn't have any problem with 30 round magazines.

January 3, 2011

This grip works nicely, installs easily and holds batteries if you don't mind the extra weight. Don't get this for your AK if you plan to use a 30rd or larger magazine or you will have to mount it too far forward to be useful.

November 14, 2010

This foregrip is for AR-15/C4 but I bought it for my Mossberg 500 that I have costumed, and I'll tell you something this has been one of my most interesting purchases, This handle was really made for Mossberg, it fit perfect I did put a screw threw it but that happens when you customize any weapon, doesnuFFFDt matter how many times I rack my shotgun this is solid, I shot 25 rounds as fast as I could just to see if the handle would move and it did not even loosen a bit. Now I'm going to buy one for my M&P-15 for what it was primarily. I love it 'THANKS CTD' now can have extra bat. For my surefire on my 12ga. storage in the handle.

November 2, 2010

I've never used a high dollar grip, but this one works well for the money. I wouldn't mind having a more secure way to attach it to the rail [like a screw and nut], but it's secure enough that I handle my rifle with just the foregrip with no problems thus far. I've had it for several weeks now. I haven't submerged it to test water proofness of the battery compartment. It fits well to my larger hand. I would recommend to a friend.

October 30, 2010

I got lucky with this grip. I applied it to my LE6940 and I love the way it feels. I honestly wouldn't go with anything else and consider myself lucky for not having to buy three or four different fore-grips before I found the right one. What's not to like? It's comfortable with its highly ergo-friendly design. It has a storage slot to cache supplies, has two inserts that can be removed and replaced with pressure switches for the installation of a lighting/lazer system. I wouldn't go with anything else.

October 12, 2010

It is reasonably priced, solid, has a storage compartment and a pressure pad slot. This is better than grabbing the magazine well and/or the magazine.

October 11, 2010

It is reasonably priced, solid, has a storage compartment and a pressure pad slot. This is better than grabbing the magazine well and/or the magazine.

October 11, 2010

Good solid install. I put it on a Troy Industries M-14 Modular Chassis System with a really heavy barrel. Weighs over 17lbs. dry so I needed something that could take the weight. Large storage area inside under a solid threaded cap but needs padding to keep the noise down.

October 6, 2010

This grip is a little more bulky than it shows in the picture. Besides that, i see nothing wrong with it. I love it and have it on my AR-15. Great buy.

September 27, 2010

This is a very solid foregrip. Had it on various platforms and all calibers, no complaints...

July 25, 2010

Solid grip. Easy to install and remove.

July 21, 2010

I got it today. It was very easy to put on. It feels good in the hands. I thought that it was probably going to be a bit small for my hands, but it wasn't. It doesn't wobble at all on the rail. Feels right for my AR-15. It doesn't get in the way of a standard mag or a C-Mag. Again no wobble at all. I tightened it by hand and it holds on firmly.

July 15, 2010

I like this grip you have great control while popping off follow up shots.

June 26, 2010

If your plastic nipple sheared off you did something wrong. The plastic nipple is only there to make sure the grip is in a slot. the base of plastic rod actually holds it in place by tightening up against the bottom of the rails as you twist it in. I have had no malfunctions. The only reason the nipple would shear is if you did not tighten the bottom enough.

June 22, 2010

Pretty rock solid grip, feels good in your hand too. Put it on my Rock River LAR-15 Elite. Worked out very well. Only con I had was that I had to wrench it down in order to keep it in place, and not loosen back up on me.

June 13, 2010

Bought on for my new AR. Love it. Great price!

April 25, 2010

Put it on a DPMS 6.8 SPC with a UTG Extended quad. It was a little tricky getting it on with that style rail, especially when you still have your sling mount on the gas block. So I put it on from the back and it's a tight fit to get over the delta ring. Once on it never moves. AA++.

April 14, 2010

I actually bought the folding version of this vertical grip, same price as this one but has 5 lockable positions. Holds two CR-123 batteries, not three. Looks like Leapers got one right with this grip. Pitching the TAPCO vertical on my Mini-14 and ordering another folding one to replace it with. Folding version wasn't listed with the AR parts, just do a stock search and select LEAPERS,UTG to find the folding version.

March 11, 2010

Fits great. Finger grooves are comfortable and help control muzzle rise due to the texture. Worth it.

March 10, 2010

I put it on my AR and it has held up to the test so far. It is nice and tight. If you don't rough house with it you will be just fine

February 23, 2010

Foregrip was loose on rail. Took electrical tape and placed it on flat part of foregrip. It took slop out of grip. Mounted it on S&W 15/22.

January 29, 2010

I just put 100 rounds through m4 with this foregrip and the little black nipple that twists into rail to secure broke off. Now the thing just slides around. It is also so large you canuFFFDt not use it as an monopod if shooting off a rest. I guess you get what you pay for. I may try drilling out a hole and inserting a bolt and nut to use in the broken nipples place.

January 24, 2010

This grip is pretty nice. I used some sticky velcro to mount my pressure switch from my Leapers laser and it works great. It also works great as a mono pod. Having said that I had to tighten it up with channel locks to get it to clamp down onto my tac-rail. If my rail had solid bars across intstead of the open ones in the middle it probably would not have slid out of place, but it did and the channel locks clamped it down tight enough to hold. I would recommend this to anyone with solid bars and will buy another.

January 23, 2010

It's a good foregrip for the price, but thats about the best that can be said. After being mounted on an AK, the plastic nipple sheared off from the mild recoil. However, once I replaced the nipple with a metal screw and nut the foregrip is a champ.

January 14, 2010

Grip is perfect size and is made of very solid plastic

January 5, 2010

Ar-15 Leapers UTG tactical vertical handle is good. I've had it for over a year, and it still operates perfectly. Leapers finally got one right!

December 20, 2009

This thing is pretty solid...took about 5 blows with a punch and hammer to mount on my .308 free float...but now it's not going anywhere...it's a great buy though..going back for one more

November 29, 2009

This is the same grip as the Mako Security grip #60992 offered on this site for $17.13 Save yourself a couple bucks and go with the Mako. This is a great grip, fits my hand well.

November 17, 2009

This is a great product and I recommend it.

November 11, 2009

Just installed to my Mini 14 with ATI stock. Went on quickly and improves grip. Laser and flashlight controls fit real good. I'm glad I bought it.

October 28, 2009

I recomend this grip to anyone wanting one. This thing holds down firmly and never moves, and I dont even have a bolt in it. Very nice.

October 24, 2009

Quality is OK but you cant beat this for the price.

October 21, 2009

I gotta say this Ar-15 foregrip works really great on my AR-15!!

October 18, 2009

The grip is wider than I expected- but that's good. Very sturdy and works well with a pressure switch. Best upgrade.

September 11, 2009

Wasn't expecting much given the price of this grip, but I was impressed. Solidly built, mounts solidly to my UTG quad rail. Very happy with this product. Hope it lasts, but it's giving me no reason to think that it wouldn't. Once again - CTD shipped this lightning fast. Thanks.

September 4, 2009

This thing mated up perfectly to my Daniels Defence free float handguard on my M4gery, its easy to use and adjust, and its comfortable. I have put this thing under my former Army Infantryman 'gorilla testing' (I'm 6' @ 210-lbs and NOT weak). I pulled on it to stress it, knocked it around side to side... it stayed rock steady! I'm not saying its unbreakable, but it gets the job done. Great function & value for the money, and I would not say it if it were not so... GET SOME!! HUAH!!

July 10, 2009

Me and my dad both have these and they fit and work great. would and will buy more.

July 1, 2009

Bought one for my personal DPMS; I figured nothing to lose at this price. Loved it so much I bought one for my duty weapon, and recommended it to all the guys. CTD got it on my front porch in less than 48 hours. Amazing.As to the guys complaining after using it as the pump on a shotgun...WTH did you expect for this price???

June 23, 2009

I've owned quite a few of these, (at least 4) & consistently buy them because from a Tactical Perspective they offer value, balance, comfort, stowability, & most importantly they're the most useful & effective Foregrip I've found anywhere. I would've paid much more for a better Foregrip if there was one available, but the only one I've found to be even comparable is the CAA Grip with Mount, but that's almost 3 times as much money. With it's battery Storage compartment filled w/CR123 Replacements for your Tactical Flashlight, it's got a very solid & balanced feel. The two sliding panels on either side are the IDEAL size for holding any standard-sized Remote Flashlight Pressure-Switch (You don't even need glue if you buy the right size switch (it'll fit snugly into the grooves). So I have to rate this the best of the Tactical Foregrips, especially if you plan on mounting a Flashlight or Laser that requires a Remote Switch, because this is the best Foregrip design for remote switched applications.-Tactical Technology

June 9, 2009

Felt and looked great until it was put on a three rail forend and after 3 rem slugs out of an 870 broke off in hand. If intended use is anything other than an AR look the other way because this product is all cheap plastic. Huge disappointment.

May 18, 2009

Awesome feel however it didn't come with a screw to lock it on the rail the grip has a pin that tightens down from the top that wasn't quite long enough but a dab of liquid weld on top extended the pin and made a tight fit. GTG

May 14, 2009

This is the best bang for the buck I've bought from this site.

May 9, 2009

This grip is so simple to install, it took more time trying to get the right feel and placement than to install. If you have problems installing this you really should not own a gun. LOL Holds up as well with no moving. Great Buy

April 25, 2009

This product has everything you need at an excellent price. I love the features it offers plus it has a nice hold on the rails. Purchasing it from CTD was a smart choice.

April 24, 2009

Bought it back in January. Shot over 500 rounds with it. Have had no problems at all. Would recommend to everyone

April 8, 2009

Hard to beat the price but I had to take a pair of vice grips to the bottom set screw to get this mounted solid to my AR. There are better grips out there, but not in this price range.

March 31, 2009

This looked great and fit alright on my AR-15 at first. Slot for pressure switch is nice and internal compartment was good. With a bit of use however, I snapped it in half while adjusting along rail with my bare hands. Bought a CAA grip that works much better.

March 11, 2009

Great value for 20 bucks. Easy install on quadrail, can't beat it.

March 9, 2009

Added this to my WASR 10 using the UTC Quad Rail. Man, what an improvement for control of the Gun! I was not crazy about the way it is secured to the rail, its not pinned. But after firing off a 100 round drum, it held up great!

March 3, 2009

Great fir with the ARR-138 picatiny rail. Fits snug. Very Secure! Love it. *****

March 2, 2009

Put this on a a forward grip on my SKS and it works just fine. Have shot several hundred rounds without it coming loose/need to tighten it at all. Like the little compartment in the handle.

February 26, 2009

If your having problems like the guy named C.J. on here was having, DO NOT USE A DREMEL OR MALLET LIKE THEY DID. You have to take out the entire screw slide it on, then screw it back in, it slides between the rails on the picitanny and then tightens the sides together...I LOVE IT ON MY AR!!!!!!!!!

February 20, 2009

Have been using this just as a grip on my m4 along with the 59.99 rail setup. It is rock solid. The grip has a pressure switch which I have not used quite yet as I do not have a light or laser.

February 16, 2009

Great grip. only dowside is to tighten the grip onto the rails you have to turn the bottom of the handle. Don't know if it will stay tight after 300 rounds. The price and quality is great.

February 11, 2009

I got this for my sks and it is great. Very worth the money.

February 2, 2009

I will have to agree with Kharenzo. The lock-up method on this grip could have been better, but then it would have cost more. Aside from that, I like it.

January 28, 2009

This grip is rock solid on my utg quad rail, I would reccomend it to anyone. Thanks cheaperthandirt!

January 21, 2009

I received my grip today and am totally pleased,very solid and mounts in seconds!!!!Highly recommended!!!!

January 8, 2009

I received my grip today and am totally pleased,very solid and mounts in seconds!!!!Highly recommended!!!!

January 8, 2009

Got this grip for the price and size... I hate the tiny grips. It is not the best and sturdiest grip on the market... but it does work well for the price. It holds the AA batteries for my Eotech and holds the pressure pads for my light and I have fired about 1000 rounds with it on there, and it works great. If you want the one that will take a bullet and stay straight... go take out a loan, because they are expensive.The guy that gave this one bullet... should he really be employed by law enforcement? Using a hammer on plastic? Then wondering why it cracked? Send it back before you destroy it... everything comes with a return label!

January 5, 2009

This is a great grip to use on any picatinny rail except for one problem. The 'screw' or bolt or whatever that tightens it to the rail is made of plastic and as such it deformed when I was adjusting the grip on my rail. This could just be a problem with me but even cinched down all the way it still has a tiny bit of side to side wobble. Overall it's good but i'd rather have one with a metal bolt.

January 2, 2009

I purchased this grip to mount onto a UTG Quad rail system and is of high quality, just as good as a grip that I purchased from a local gun store for $40.00.

December 30, 2008

Bought this grip 10 months ago, and it has performed flawlessly. I just put it on my rail, tightened it down, and forgot about it. Easy to remove, and great storage compartment. Will be buying more.

December 30, 2008

I purchased this grip to mount on a UTG Quad Rail and it works great. Easy install and feels very solid.

December 28, 2008

I bought this grip for the pressure pad cut out as well as the sturdy look. First I tried to use a mallet to get it to slide on. Then I used a file to try to smooth out the slide portion. Next I actually had to use a Dremel tool to grind out some of the plastic and still had to use a hammer to get it on the rails I bought from CTD. Needless to say the grip started cracking the first time I deployed it on duty as a Police Officer.

December 26, 2008

Sturdy and works well for the price. Threads on the bottom nut are plastic and a little tight when turning but a little sandpaper took care of it.

December 18, 2008

I recently bought this and the utg quad rail for my Dpms. What a pair. Works perfect with no movement at all. You dont need anything higher end then this.

December 8, 2008

I was very impressed by this grip. It is all plastic which may concern some people, but this thing is rock solid. Very good buy. Well worth the money. Mounted easily on my UTG quad rail.

December 7, 2008

Rock solid, locks in place on my UTG quad-rail and will withstand tremendous force. Feels a little heavy right out of the box but this impressed me, it is not wimpy.

December 5, 2008

Absolutely can not be beat for the money. You could pay 70 and get the TD grip but I sure wouldn't. It is plastic but seems pretty stout, and the battery compartment is O-ringed which impressed me, plus it has a spring inside the handle to keep pressure on the batteries to keep them from rattling. If I was a pro I might spend the extra money to get something a little beefier but I'm not so this is great.

December 2, 2008

This is a great grip. ordered it on Friday night, got it Wednesday morning. locks solidly in place, feels great in the hand. love the price as well

December 2, 2008

I was skeptikal at first. But after installing this and getting a feel for it, I have to say that it was well worth the money and it looks great too! Oh, and it is not flimsy at all like I was told it might be....

November 11, 2008

I figured the price being so low would mean its cheap quality.. couldnt be further off, material is great quality, its very comfortable. I put this on my AR15 with a swatforce flashlight with pressure switch and it works great. I highly recommend this product.

November 2, 2008

This product is at a great price, and it works great too! It is easy to put on and take off, and it also accommodates other tactical gear well. It makes the gun much easier and steadier to aim. I would recommend it anyone!

October 28, 2008

This is a great grip and i really like the storage compartment! Thanks CTD!

October 27, 2008

Fits the front rail of my wasr-10 like a glove. Makes it much more comfortable to shoot, especially since the weight of the gun has increased with all the aftermarket parts I've purchased. Allows you to pull the stock in tighter to your shoulder, thus increasing accuracy and conformability. Thanks CTD

October 10, 2008

I recieved this with my bi-pod and installed it on my Bushmaster AR-15 front rails(that i also bought from CTD) and it fit perfectly. You could not ask for a better product at a better price. Highly recommended.

September 22, 2008

I bought this grip because it was the only one available at the time. I thought it looked quite bulky and would be cumbersome. In reality, its quite comfortable. It is bigger than most, but fits well in your hand. And even though it is a polymer grip, it feels very sturdy and attaches to my rails very well. Id definately recommend it.

September 16, 2008

its a solid grip. it had such a tight fit on my rail i had to use a rubber mallet to slide it on there before it was even tightened, but once it was on i was pleased.

August 27, 2008

I bought this for use on a Mossberg 500 with a picatinny rail forend. Much more comfortable than tommy-gun style pistol grip forends I've used that put your hand at an awkward angle and do not allow for anything but a standard grip. Works great with a streamlight mounted about 1.5 inches in front of it on the rail. Provides a good balance point to my shotgun and easy access to the streamlight switch. Very comfortable to hold in any position and great when working the shotgun's action. Bulky enough to feel sturdy without feeling like a baseball bat. My military days are far behind me so I can't comment on mil/field use, but for home defense and range use should do a bang-up job.

August 16, 2008

This is a great grip for my AR-15 and like always CTD had quick dilevery service. As soon as I opened it up I slid it right on my AR and it fit perfectly. Thanks CTD!

August 14, 2008

This is a great feeling grip and secures tightly to my tac rail. I had to cut away a bit of the support on the back of mine so I could quick detatch it by sliding it toward the receiver instead of also removing whatever I had installed in front of it and taking it off towards the muzzle like I believe was intended. As far as SPC 6's comment on it not being sturdy enough for combat, I have yet to fall on mine repeatedly or run it full force into a concrete wall so I have no comment other than it feels like is would take most non-combat wear in stride! And as for the guy who couldnt figure out how to attach his pressure switches: Remove battery compartment, Slide out either right/left side's textured plastic tab, Slide in pressure switch, cord side up(may require some gorilla glue to stay put), and DONE!

August 12, 2008

I bought this grip and the very similar Tango Down grip from another retailer for about $65.00. This one feels every bit as rugged and durable as the Tango Down, and fits just as tight. This grip is an extremely good deal!

August 5, 2008

Seems like a nice grip for the price. Had some trouble sliding it onto my surefire quadrail and had to use a hammer to bang it into place. Feels sturdy but i have the feeling if i bang it into something it might break off.

August 1, 2008

have two of these, one on a Remington 870 mako tactical forend and the other on a WASR 10. Works well in both applications. Angle isnt perfect on the 870, but it is removable which is a plus. Just fine on the WASR 10 though. I like them for the price and have held up well for me at least

July 31, 2008

Great for the price. Installed on my Sig 556 HOLO - looks like it came with the weapon. When comparing to other grip this one seems to be oversized, but it is a positive - feels great.

July 29, 2008

Great for the price. Installed on my Sig 556 HOLO - looks like it came with the weapon. When comparing to other grip this one seems to be oversized, but it is a positive - feels great.

July 29, 2008

I've had this on my Bushmaster AR-15 since Feb. I bought a short rail to mount it on the bottom. So I could still just hold the forestock or use the grip. Terrific price. Very solid and well made. I have a tri-mount rail on the top. I have my tactital light and laser mounted on them. With the pressure switches mounted firmly in the slots that you take out the filler pieces. I don't trust the double-tape. So I got black cable ties and wrapped them around the swtiches top and bottom. Tightened them down and cut off the extra. If you get them positioned right they aren't in the way at all.

July 28, 2008

Unless I'm going blind, picture makes it look to be of better quality than it actually is. If I would have known that it was made out of plastic, I may have considered buying a different one. I'm a civilian and even I can see how it probably wouldn't hold up to well 'in action'. However, it does look good and is very comfortable. I'll let you know how it does at the range...

July 26, 2008

I bought this grip and put it on. It works great. I however can not figure out how to get my pressure switches to work on it. Maybe some one can tell me?

June 26, 2008

I used 3 of this style hand grips while I was in Iraq. They Kept breaking where it attaches to the hand rail it might be good for civilian use but for mil applacation it didn't hold up to wel

June 23, 2008

I got mine last week and was very pleased with it as soon as i pulled it out the box.Strong, sturdy, and fits perfectly.

June 21, 2008

Nice grip, and easy to install. Fits tight on the rail and feels comfortable in my hand .

June 18, 2008

Got this and the quad rail ARR-138 and they are BOTH awesome! The grip is definitely substantial but even though I have small hands it still feels great. Can't be beat for the money especially with the features it has. SOLID BUY! Thanks CTD!

June 11, 2008

I installed it on my bushmaster m4 orcits a little loose but it works ok

June 9, 2008

As with eveyone else I found this to be a great item and a great but way cheap upgrade . But the problem is I couldn't decide which rifle to put it and keep it on so now I'll now I'll havta get one for ALL of 'em . Thanks a frelling lot CTD ! LOL!

June 4, 2008

Straight out of the package I was amazed to see the quality of the product. Then when I installed it, I was once again amazed to see and feel the sturdiness of the handle. Very nice product and have recommended this to numerous persons.

May 29, 2008

Awesome grip. Fits sturdy on rail system. (AKS-101) The grip was larger than I expected. Its a good fit for someone with large hands. Easy to take on and off. Worth every penny.

May 24, 2008

I bought this grip some time back (about a year or so) for my Bushmaster and just wanted to say that it has never let me down even after taking it off and on time and time again, it still works great! bought another one for my AK. Great product! thanks CTD!!!!!!!!!!

May 20, 2008

Works Great, Feels Great, Price Is Great,Shipping Is Great!!!

May 17, 2008

This grip is amazing. Simple, yet effective. It does it's job- Being a Forend Grip but allows you to store 3 cr123's inside & gives you a place to mount you light trigger. Great Product.24th MEU

May 14, 2008

Perfect fit for large hands, After ordering product was in my hands in two days.

May 14, 2008

This grip is amazing. Simple, yet effective. It does it's job- Being a Forend Grip but allows you to store 3 cr123's inside & gives you a place to mount you light trigger. Great Product.24th MEU

May 14, 2008

One of the first things I purchased for my first AR. I've never used another vertical grip, so I can't compare it to anything else, but it's comfortable and doesn't seem large to me (I have normal-sized hands). I take mine off frequently (gun cleaning, etc.) and it goes right back on without a hitch. Good product.

May 12, 2008

this one is just as good as models costing 3-5 times as much.... should have bought this one first! Installed in ten seconds.

May 8, 2008

Works great! fits pressure switches great. DON'T PUT BATTERIES IN THE COMPARTMENT!! completes circuit with (AA) batteries no matter '++' or '--' gets hot and battery acid everywhere. Very strong and comfortable.

May 6, 2008

I put my AR-15 Forend Grip on my AK-47 I have a Tri-Rail Universal Barrel mount on my AK and a 5' Picatinny Riser added on to it to come back a little bit [so I am not stretching to hold it! I had a Romanain front grip ,but it did not allow you to hold it [very well] like a traditional rifle so I put the original wood front stock back on! but now! I have the best of both worlds! I can shoot it like a traditional rifle [holding the wood front stock] or I can hold it Tactical style! I have a 5mw Green laser on the side of the tri-rail and on the right hand side I have a Tactical flashlight [90 lumens] with 7per sec. strobe to blind perps in the dark[the darker the better!] the AR-15 Forend grip works great! ,just line up the holes on your Picatinny rail tighten it down and 'go to town!' the only thing I did not care for was you need a coin or a common screwdriver [with a thick wide blade] BUT I have the fix it that worked for me! I took out the old drimmal with a thin cutting wheel and found that a quarter is just a little smaller than the slit so I cut about 1/4 off so it was the length of the slit, then I super glued that quarter in the slot! once dry I used some grill spray paint to give it a flat black look. Now I can get them three 123 batterys in no time and it don't look bad! I put My laser pressure switch in the grip {it fit tight,but better tight than not! } and it works great! I can reach the flashlight button no problem! [I use my thumb! If you buy this it is going to be the best $11.97 you ever spent! 5-STARS!!!!!!!!

May 1, 2008

I got this on an airsoft gun and I have to say that this is a great buy. The bottom is how you tighten it, it also has a housing for pressure switches!!!!!!!!!!!

April 29, 2008

I put this on a SOCOM II and it fits perfect. You can't beat the price and it was easy to put on. It looks good on bigger guns because of it's size but for the price it will look just fine on any gun.

April 26, 2008

Put it on my Bushmaster M4 and it works great, looks great, and you can't beat the price... Enough said.

April 20, 2008

I purchased this grip for my M&P15 with Quad Rail (ARR-073). It feels nice in your hand and has great storage. It is easy to install with absolutely no tools required. I highly recommend.

April 20, 2008

I just got this grip and it works great. I can place 3 of the 123 batteries in the Grip so if I'm on a call out I have spares. I have not used it on the range let but I am very happy with the grip. GREAT BUY

April 16, 2008

Purchased this grip a few weeks ago and so far it works great. I've attached my pressure switch for my flashlight and all together it seems to be very durable. Definitely great for the low cost.

April 8, 2008

Grip is exactly as described, and fits well, easy to take on and off with no tools, and stores my c123 batteries nicely. Would definitely get another one at this amazing price!

April 8, 2008

I agree with all the rest. This a great grip, easy to install and sturdy.

March 26, 2008

This grip is SOLID. Fits amazingly well on my Yankee Hill free float. Won't budge at all. Nifty compartment in the grip.

March 25, 2008

Great product for little $$$. The slots are really great for mounting light/laser pressure switches. True it's a little bigger than other foregrips but if you have bigger hands it's actually better. For those wondering why they didn't get pins or screws for this...YOU DON'T NEED THEM!!! This unit attatches the same way that my knights Armament foregrip does. The center post uses pressure to hold it to the rail. I've had a knight armarment on my current M4 and several prior including the one I carried in the Marine Corps and on a SWAT Team, and never had a problem with wiggling loose. The only reason I purchased this one is because of the slots for the pressure pads. Take it from a professional who relies on equiptment to keep myself and others alive, this will be a great purchase.

March 24, 2008

I'm a soldier serving in Iraq and this grip serves me well. Makes my weapon easier to carry and control, fits my hand great, its a great place to store some extra batteries for my optics, and the slots for pressure switches are great. If you need a forward grip, this is the one to get.

March 23, 2008

Very solid, but much longer than I expected. Works well.

March 16, 2008

I used this grip for my year in Iraq, and I loved it! I like that it is a thicker grip, fits in my hand great. Pressure switch for my light fit well in the groove. Battery storage is great. Holds tight to the rail, rock solid after alot of abuse in Iraq. I am buying a second one just for my own personal rifle!

March 14, 2008

What else can i say everyone else has covered all of the bases. From what I've noticed the ONLY bad thing is its somewhat bulky. Other than that no complaints.

March 9, 2008

This one doesn't come with a pin or screw nor does it need to. When you screw out that tube, slide it on the rail, then you screw the tube back in, look through that hole in the side and you'll notice when you screw the tube in a knob sticks up to hold the grip in place on that rail. It works good, I have this on my AR15 and will probably buy another one for my FAL when I get it.

March 7, 2008

Customer service emailed me, and they are sending me another grip. I have since figured out that this one attaches to the rail by tightening the bottom of the compartment tube against the rail. It seems to work fine, but I would have not ordered it had I know it attached to the rail in this manner. I would prefer screws. But for the money, it seems to be a good grip. It feels tight once in place. I have not got to shoot with the grip yet, but it seems like a secure fit.

March 6, 2008

This grip seems fine, except that mine did not come with any type of screw or pin to push through the holes to secure it to a rail. Anyone else have this problem? Also, you will need a flat screwdriver or similar tool to remove the cap for the compartment. The entire plastic tube screws out easily, but the cap to open to gain access to the contents of the compartment is slotted and recessed requiring some type of flat edge to open it. I have contacted customer service and am awaiting a reply as to if they will ship me a screw or pin for it. It did not come with any way to affix it to the rail.

March 4, 2008

The reviews are right on. I figured with the low price quality would be marginal. It's well built and fits great on my rail. Comfortable grip, well worth the price.

February 21, 2008

This was a great addition to my Stag Arms Model 1H A3. I can shoot as fast as I want without having the sight move away from the target. It is a great peace of hardware. Leapers makes some great products.

February 19, 2008

i was really suprise how great this piece for my m4.great price and great look.very very happy.......................

February 18, 2008

wasn't 2 sure of how it would look on my m16 but once i got it on the gun it gives it a real nice look

February 9, 2008

By far the best value for a pistol grip. This grip fits tight, looks sweet, holds batteries and two pressure switches, and feels great. By far the best value out there.

January 22, 2008

By far the best value for a pistol grip. This grip fits tight, looks sweet, holds batteries and two pressure switches, and feels great. By far the best value out there.

January 22, 2008

THIS FOREGRIP IS JUST AS GOOD IF NOT ETTER THAN HE TANGO DOWN VERSION COSTING $60+. THE CUTOUTS FOR THE PRESSUR SWITCH IS EXCELLENT. BEST BUY FOR THE BUCK!

January 18, 2008

Very sturdy forend grip. Comfortable with great features. Can't be beat (especially at this price!).

January 18, 2008

Another great Leaper's and CTD value! Very pleased! Thanks!!

January 8, 2008

Just look at the rating this foregrip has received! I have to agree with everybody that has reviewed this product, what a GREAT product for the price! I would recommend this grip to everybody.

December 7, 2007

Extreamly comfortable, stores two double A's for my EOTech, and what a price!!! Highly HIGHLY recommend!!!

December 3, 2007

This is a neat little grip. Super easy to put on, and feels great. No worries about your hand slipping off as the pressure switch inserts on each side have a sand paper like texture to insure a good grip when you don't have any pressure switches mounted in there. My only beef is the pressure switch for my laser is a little too narrow and just pops in and out, so I have to use some electrical tape to hold it in place. But that's my fault because I bought a cheap laser, lol. Maybe some of the better ones use a more standardized pressure switch size. But a great grip, especially for the price!

December 3, 2007

I can't believe a foregrip this cheap is this nice. It is an excellent foregrip! You absolutely will not be disappointed in this! It is way nice than the YHM foregrip I originally bought. It is very comforable in your hand. BUY BUY BUY!

November 22, 2007

I JUST INSTALLED ON MY DPMS M4 GLACIER GAURDS AND USED A RAIL ON THE BOTTOM. FITS GREAT AND WOULD RECOMMEND. HAS A STORAGE PLACE FOR 3 123 BATTERIES AND CUT OUT SLOTS FOR PREASURE SWITCH ON EACH SIDE. IT SECURES BY TIGHTEN THE BOTTOM OF THE GRIP. BEATS A 65.00 TANGO DOWN.

November 13, 2007

Just bought this grip for my Rock River AR-15 and it's awesome. I prefer this over the cheaper normal vertical grip because it's a little fatter so your hand wraps around it more comfortably. And I bet people who spent $60 on a Tango Down is crying in their beers right now. I say buy this before Leapers gets sued because it's an almost exact copy at 1/6 the price. Can't beat that.

November 3, 2007

Great accesory for any rail system. I really liked the fact there's no bolt and screw, it's very simple. Oh and as for the battery compartment it looks like it's meant to be opened with a quarter.

October 17, 2007

Great accesory for any rail system. I really liked the fact there's no bolt and screw, it's very simple. Oh and as for the battery compartment it looks like it's meant to be opened with a quarter.

October 17, 2007

Just got this grip for fun and i was alot more impressed then i thought i would be and for such a inexpensive price....you can't get a better grip for this price.

October 8, 2007

I recently bought this grip from CTD for my ak and i love it. it gives the gun one heck of a bad boy look. Installation only took a few seconds and i would recomend this for anyone who has an Ak-47 or Ar-15 with Picantinny rails.

August 28, 2007

I have this grip on my Rock River AR-15 with the quad rail hand guard. Can't be beat for the price. The slots for pressure switch's works great for the Streamlight TLR-1 switch.

August 22, 2007

Just recieved Grip, shipping only took 2 days from placing order. Grip fits and feels good. Only complaint is the battery storage. It holds 3 surefire batts, but it takes a screwdriver to take them out, other then that Great.

August 15, 2007

This is the grip to buy! Slotted for light switches, storage for batteries, finger grooves for a better grip, firmly mounts to rails, not to mention an unbeatable price! What more could you ask for?

August 9, 2007

This is the grip to buy! Slotted for light switches, storage for batteries, finger grooves for a better grip, firmly mounts to rails, not to mention an unbeatable price! What more could you ask for?

August 9, 2007

In 5 seconds I installed this grip! It is Very comfortable and very practical! And for the money you can't beat it! I recommend this to everyone that has an AR.

July 14, 2007

I ordered, recieved and installed all in record time thanks to CTD great service. This is the best grip that I have seen anywhere. Fits great and works better. If you are looking for a forgrip then buy this one dont waste time with with any others at the same price and dont waste your money on any that cost more.

July 4, 2007

Nice fit and feels good. Great price too!!

June 29, 2007

Nice and tight, only problem was one of the two I ordered stripped slightly when I unscrewed the battery case. It was a pain to get back in straight but I did. Wish there was a download page for pictures to show these products being used, that would be cool. Great price for this grip.

May 23, 2007

I have purchased all there of these grips, black, coyote and green, all have performed well. A litttle bulky but very comfortable. Side pressure pad panels are great, battery sotrage is good, 2 AA or 3 123 Lithium. End cap is both slotted and 'knurled' which is good to have BOTH features.

May 1, 2007

Product works great on my AR-15 fits perfect on a Quad Rail, CTD very quick shipping at a great price

February 18, 2007

I have only one bad thing to say. THe grip seems a little bulky but other than that I like it.

January 14, 2007

this is really a good grip. both side pressure switch slots are great for lights and laser cords. the only flaw i've found is the sloted cap on the storage compartment and the plastic tip that sets in the rail mount . it;s holding up very well after a year of heavy use on M4. I would buy another one.

November 19, 2006

What light would work best with this on an m&p-15?

Don Ratcliff Mar 6, 2024

Answer: You could just kill two birds with one stone. Item# LIGHT-276-003

Cheaper Than Dirt staff Mar 6, 2024

Will this fit a Mlok?

Noah Hanna Nov 16, 2023

Answer: You would need to add a picatinny rail to one of the M-Lok slots to mount this item. Check out item # 108751 and 16-MTURS09M.

Cheaper Than Dirt staff Nov 28, 2023

Is this compatible with an ar 15 s&w?

Pedro Leos morales Aug 4, 2023

Answer: If your AR15 has a picatinny rail on the handguard for this to mount to, then this is compatible.

Cheaper Than Dirt staff Aug 16, 2023

How many pieces do you have in stock?

Paulina Chavez Mar 27, 2023

Answer: We have 63 of these in stock at this time.

Cheaper Than Dirt staff Mar 29, 2023

will it fit 16 inch ar?

nan nan Feb 10, 2023

Answer: If it has a picatinny bottom rail this will fit.

Cheaper Than Dirt staff Feb 10, 2023

Does it fit Glock 26?

Jack Hiemen Dec 16, 2022

Answer: No this will not fit.

Cheaper Than Dirt staff Dec 19, 2022

Will it mount on a quad rail?

John Sylvain Jul 2, 2022

Answer: Yes, this will mount to any standard picatinny rail.

Cheaper Than Dirt staff Jul 7, 2022

Can I make this a Landor 902 Bullpup?

Bruce Monismith Jun 15, 2022

Answer: Yes this should fit.

Cheaper Than Dirt staff Jun 16, 2022

Will this fit my Ruger AR556 ?

Scott Scott Nov 13, 2021

Answer: If your Ruger has Picatinny rail then yes it should.

Cheaper Than Dirt staff Nov 15, 2021

I have Hi-point model 995 will this fit the rail?

nan nan Oct 22, 2021

Answer: Yes it should fit the rail.

Cheaper Than Dirt staff Oct 22, 2021

What battery does it tske?

nan nan Feb 5, 2021

Answer: It can fit a AA battery

Cheaper Than Dirt staff Feb 7, 2021

Will this mount to a DB15 Ar-15 pistol?

nan nan Dec 28, 2020

Answer: It will mount on anything with a picatinny rail.

Cheaper Than Dirt staff Dec 28, 2020

Will this fit on silver eagle RZ17?

nan nan Aug 12, 2020

Answer: It is not recommended for pump action shotguns.

Cheaper Than Dirt staff Aug 13, 2020

Does this fit on a key mod rail?

nan nan Aug 8, 2020

Answer: You will need a Picatinny rail adapter. Recommend item # ARR-253-062.

Cheaper Than Dirt staff Aug 10, 2020

Does this come in desert brown?

nan nan Jul 31, 2020

Answer: No it does not.

Cheaper Than Dirt staff Aug 4, 2020

Can this fit on glock 23

nan nan Jul 23, 2020

Answer: No it cannot.

Cheaper Than Dirt staff Jul 23, 2020

Will this fit my Leapers UTG Yugo quad rail for an AK 47?

nan nan Jun 29, 2020

Answer: Yes, the quad rail is a standardized picatinny rail.

Cheaper Than Dirt staff Jul 29, 2020

Will this fit on Leapers UTG AK-47 Yugo Quad Rail Handguard ?

nan nan Jun 22, 2020

Answer: Yes it will.

Cheaper Than Dirt staff Jun 28, 2020

will this fit on a hammerli tac r1 22lr

nan nan May 14, 2020

Answer: This will fit on any rifle with a Picatinny rail. You would have to add a Picatinny rail section to attach this to an M-LOK rail as on the Hmmerli.

Cheaper Than Dirt staff May 14, 2020

Would this be ok on a shotgun racking handle

nan nan Mar 1, 2020

Answer: Yes it would.

Cheaper Than Dirt staff Mar 1, 2020

Is this intended for use on higher caliber (i.e. 6.5 Grendel) calibers?

nan nan Jan 23, 2020

Answer: This fore grip will work on any caliber.

Cheaper Than Dirt staff Jan 23, 2020

Would this fit my AR 15 22LR ?

nan nan May 24, 2018

Answer: It will fit any rifle with a Picatinny rail to mount it.

Cheaper Than Dirt staff May 28, 2018

I guess I should have phrased my question better. Is there any hardware to help bolt this to the rail better. When u remove the center storage tube the grip moves and is not as solid

nan nan Apr 29, 2018

Answer: No, there is not. You should be able to screw it down tight.

Cheaper Than Dirt staff Apr 30, 2018

Read it doesn't come with any mounting hardware?

nan nan Apr 27, 2018

Answer: It doesn't require any hardware. It mounts directly to a Picatinny rail.

Cheaper Than Dirt staff Apr 29, 2018

How much does this grip weigh?

nan nan Sep 7, 2017

Answer: The weight is 6.7 oz.

Cheaper Than Dirt staff Sep 11, 2017

Will it fit a Bushmaster.

nan nan May 16, 2017

Answer: It will attach to a Picatinny rail on any rifle, regardless of brand.

Cheaper Than Dirt staff May 16, 2017

AR-15 Vertical Tactical Foregrip Black Leapers UTG 5" Length Battery Storage Ergonomic Ambidextrous RB-FGRP168B [FC-4712274522503]

AR-15 Vertical Tactical Foregrip Black Leapers UTG 5" Length Battery Storage Ergonomic Ambidextrous RB-FGRP168B [FC-4712274522503]

nan RB-FGRP168B

nan RB-FGRP168B