Since 1968 Hogue has manufacturered everything from handgun grips, long gun stocks , AR components, specialty knives to gear and accessories. All share the same quality: Fit, function, superior performance and world-class design are hallmarks of the Hogue name.
Hogue shotgun stocks are molded from a super-tough, fiberglass reinforced polymer assuring stability and accuracy. The grip area of the stock and the entire forend are OverMolded with soft rubber for outstanding shotgun handling characteristics, which facilitate fast and easy mounting all the while maintaining excellent sight acquisition. In addition, the grip features ambidextrous ergonomic palm swells and is finished with an exclusive recoil cushioning Hogue butt pad. These superior stocks are durable, weatherproof, and non-slip.
Features and Specifications:
Manufacturer Number: 05312
Fits Model 590A1 835 series 3 ½” magnum pump shotguns providing adapter nut #05020 is used, Maverick model 88. Forend may require replacement of action bars (slide tube) with 7 ¾” “metal tube” type, Other Mossberg pump shotguns that are copies or variations of the 500
A flat washer MUST be used with the factory stock bolt. A washer is included with the stock. The Hogue stock is designed to reuse the factory stock bolt with the addition of the flat washer
The stock bolt (not included) is a 5 ½”long 5/16” – 18 TPI with a flat washer, available at any quality hardware store, gun parts retailer, or from Mossberg directly. You must use this bolt when changing from a pistol grip or Tamer to a butt stock. Tamers/Pistol grips use a short bolt that is included with the Tamer (no washer needed)
Forend adapter nut may be required for some models #05020
Length of pull: 14”
Recoil pad is 1” thick
Drop at front of comb as measured from center line of the barrel is 1 1/2”, and drop at heel is 2 1/2”
Weight (with washer): 1 lb, 1.22 oz
Color: Field Dark Earth (FDE)
Fits:
Mossberg 500, Model 590, Maverick 88
Hogue shotgun stocks are molded from a super-tough, fiberglass reinforced polymer assuring stability and accuracy. The grip area of the stock and the entire forend are OverMolded with soft rubber for outstanding shotgun handling characteristics, which facilitate fast and easy mounting all the while maintaining excellent sight acquisition. In addition, the grip features ambidextrous ergonomic palm swells and is finished with an exclusive recoil cushioning Hogue butt pad. These superior stocks are durable, weatherproof, and non-slip.
Features and Specifications:
Manufacturer Number: 05312
Fits Model 590A1 835 series 3 ½” magnum pump shotguns providing adapter nut #05020 is used, Maverick model 88. Forend may require replacement of action bars (slide tube) with 7 ¾” “metal tube” type, Other Mossberg pump shotguns that are copies or variations of the 500
A flat washer MUST be used with the factory stock bolt. A washer is included with the stock. The Hogue stock is designed to reuse the factory stock bolt with the addition of the flat washer
The stock bolt (not included) is a 5 ½”long 5/16” – 18 TPI with a flat washer, available at any quality hardware store, gun parts retailer, or from Mossberg directly. You must use this bolt when changing from a pistol grip or Tamer to a butt stock. Tamers/Pistol grips use a short bolt that is included with the Tamer (no washer needed)
Forend adapter nut may be required for some models #05020
Length of pull: 14”
Recoil pad is 1” thick
Drop at front of comb as measured from center line of the barrel is 1 1/2”, and drop at heel is 2 1/2”
Weight (with washer): 1 lb, 1.22 oz
Color: Field Dark Earth (FDE)
Fits:
Mossberg 500, Model 590, Maverick 88
2 Ratings
Nice replacement part
Nice product.
January 7, 2021
Nice upgrade from the original stock / forend
Kudos to CTD for having the set in the FDE color. The feel is much better than the original stock on my Mossberg 590SP and the LOP is actually about 1/2 inch shorter which makes it more comfortable to shoulder and reach the forend. Best of all was that I didn't have to take the gun apart to install the new forend. Just remove the barrel and use a wrench that slides over the magazine tube. Remove the locking nut and the forend comes right off ! Slide on the new forend, replace the lock nut and barrel and you're good to go. Basically, follow the directions on the package - what a novel idea ! The look and feel of the new stocks is well worth the time and expense.
February 20, 2020
Will the fit the older Mossberg 500
Answer:
Yes it should.
Anything special needed to use on Mossberg 500AB ?
Answer:
No. (unless you have the fore-arm with the molded in action arms, then you need to purchase a standard action tube)
Does this forend fit the short 6 3/4 mossberg 500?
Answer:
It would require item SHT-128-019 to fit the shorter action tubes.
Will this fit a Mossber 590A1?
Answer:
Yes. You will need an adapter nut, Mossberg item number 05020. We do not currently stock that item.
I have a maverick 88 12 gauge 28" barrel and I would like to know what parts do I need to use this forend? Is it just the action bars or the action slide as well? If it is the Action slide also what length do I need the 7 1/2 or the 6 3/4 with the nut?
Answer:
You would need new action bars. Unfortunately we don't currently have them.
Does this fit a Maverick 88 12 gauge shotgun?
Answer:
The stock will fit. To install the forend might require replacing your action bars, as the forend on the Maverick is usually permanently attached.