Hogue shotgun stocks are molded from a super tough fiberglass reinforced polymer, assuring stability and accuracy. The grip and entire forend are overmolded for outstanding handling characteristics. These superior stocks are durable, weatherproof and non-slip. Hogue shotgun stocks are super comfortable with a standard length of pull, ambidextrous ergonomic palm swell and a soft recoil cushioning buttpad.
Features and Specifications:
Manufacturer Number: SRAI-ML3-3HBT-00
Material:: Synthetic
Finish: Matte Black
Recoil Cushioning Buttpad
FIts:
Mossberg 500, 590A1, 510 Mini, Maverick 88 (12 Gauge)
Features and Specifications:
Manufacturer Number: SRAI-ML3-3HBT-00
Material:: Synthetic
Finish: Matte Black
Recoil Cushioning Buttpad
FIts:
Mossberg 500, 590A1, 510 Mini, Maverick 88 (12 Gauge)
No Ratings
Be the first to review this item
I'm converting my pistol grip Maverick 88 with a 20 inch barrel to a shoulder stock. This is product contain all the bolts and washers I would need for this conversion?
Answer:
Hi Eric! Here's what Hogue says: (A) A flat washer MUST be used with the factory stock bolt. A washer is included with the stock. The Hogue stock is designed to reuse the factory stock bolt with the addition of the flat washer. (B) The stock bolt (not included) is a 5 ½”long 5/16” – 18 TPI with a flat washer, available at any quality hardware store, gun parts retailer, or from Mossberg directly. You must use this bolt when changing from a pistol grip or Tamer to a butt stock. Tamers/Pistol grips use a short bolt that is included with the Tamer (no washer needed). (C) Forend adapter nut (#05020) may be required for some models.
Would this work on mossberg model 535 ?
Answer:
Hi Rey! Here is Mossberg's own answer to that question: "Yes, a Mossberg 500 stock (SKU#05012) will fit on a Mossberg 535 pump action. The Mossberg 500, 535, 590, 835, and Maverick 88 all share the same stock dimensions and can interchange stocks."
Does this fit a mossberg 500A? Thanks
Answer:
Yes sir. There are no functional differences between a 500 and 500A.
can i use this to form one my 20 gauge 590 shock wave to a sbs?
Answer:
Hi Neil! I went ahead and asked Hogue. Here is their answer: "Your customer is asking if the stock SKU#05012 will make his Mossberg Shockwave a Short Barrel Shotgun (SBS) which needs a Form one completed to get the tax stamp required to own a SBS. The answer is yes this stock will make a shockwave a SBS and need to be done legally. None of what I have written should be taken as legal avdise."
Do I have to change the forearm slide for this new forearm?
Answer:
Hi Bill! Hogue says it depends on the action tube assembly. If you have a 7-5/8 or 7-3/4 inch, ou do not need anything else. If it is 6-1/2 or 6-3/4 inches, you will need an adapter nut (SKU 05020). If you have a Maverick 88, you will need an action tube assembly that the manufacturer says is only available on eBay.
will this fit the 535?
Thx for your help,
Wayne
Answer:
Hi Wayne! I just heard back from Hogue. Here is what they say: "Yes, a Mossberg 500 stock (SKU#05012) will fit on a Mossberg 535 pump action. The Mossberg 500, 535, 590, 835, and Maverick 88 all share the same stock dimensions and can interchange stocks."
I have a Maverick 88 that I need to replace the stock as New York State classifies this shotgun as some sort of a terror weapon. I purchased it while I was living in Vermont, will this stock work?
Answer:
Hi Robert! Sorry to hear you're wading through it. This stock and forend kit is indeed specified for the 12ga Maverick 88/
I have a mossberg 500C 20G, pump shotgun. Originally came w a pistol grip which bolts through the top rear of the pistol grip w an allen type bolt. Question: Will this stock retrofit, in place of the pistol grip?
Answer:
Hello again James! I just heard back from Hogue. They say: "SKU #5012 will not completely fit the 20 gauge as the forend is not compatible. The butt stock will fit without issue as long as you have the correct bolt/mounting hardware (which is not provided). You will have to find one online or contact Mossberg directly for the bolt."
Will this fit the 600AT as well?
Answer:
Hi Nick! I had to ask the manufacturer. Here is what the Hogue rep says: "I do not have a 600AT in house to confirm fit, everything I have been able to research points to all Mossberg 500 furniture fitting the 600AT. I would say that the 05012 will fit the 600AT."
Will this fit a 20 Guage mossberg 500
Answer:
Hello again Richey! I just heard back from Hogue. They said: "The stock will fit the 20 Gauge, but not the forend. 05017 is the PN for the Kit for 20 Gauge." Very interesting. I regret that we haven't got product number (PN) 05017 in stock at the moment, but I'm sure you could find what you're looking for by Googling "Hogue 05017."