Hogue Handall grip sleeves are scientifically designed and patented with an innovative shape that hugs the contours of your firearm giving them the tightest and most secure fit possible. Molded from their modern, soft, but durable rubber, Handall grip sleeves are easily installed and provide years of dependable service.
Soft textured rubber slips on to improve your grip. Fits large frame autos, not intended for handguns with grip safeties.
Features and Specifications:
Manufacturer Number: 17000/86431
Soft textured rubber slips on to improve your grip. Fits large frame autos, not intended for handguns with grip safeties.
Features and Specifications:
Manufacturer Number: 17000/86431
42 Ratings
Great product, I would buy again!
I have an injury to my right (shooting) hand that caused the amputation of my middle finger. This Hogue hand grip gives me the dexterity needed to handle my weapon yet is form fitting enough not to get hung up when drawing weapon.
September 11, 2018
Works Great
Great for compact Glocks. Fits perfectly and very grippy. I've been using these for years and they hold up well to the test of time.
February 28, 2018
Awesome!! easy install. Great feel.
I read reviews before ordering. With so many people saying good things I had to buy them. I did the normal shipping wasn't in any rush. still only took 5 days to get here. I heated them up in hot water dry real good and had a hair blower to keep them hot. took 5min to get them on my taurus pt101. I didn't even have to trim them.. And boy do they feel great snug against the gun. Solid grip when holding the pistol. I know for sure this is going to improve the handling of my pistol. Pros: Durable
June 29, 2017
Fits perfect on my XD40 i
Fits perfect on my XD40 its a little tuff getting on but its worth it, not to mention the price is right!
July 14, 2016
Easy install, performs we
Easy install, performs well. Bought for a Ruger P95 and fit like a glove. Hogue never fails to disappoint. 4 bullets due to that the sleeve slowly slides down over time.
May 1, 2014
This is a very nice grip.
This is a very nice grip. I've used it in my Glock 22, Glock 23, and my Hi-Point .40. It fits all of them great. If you have difficulty putting it on, use warm and soapy water to help. Also works well on rifles with pistol grips.
November 22, 2012
Bought it for my PX4 Stor
Bought it for my PX4 Storm and it was a really tight fit, which in no way is a bad thing.
September 26, 2012
Bought two different grip
Bought two different grips, hoping one of them would fit my AMT automag III. I didn't even try the other grip this one looks great, after a beer I finally slid it on there, should've wet the grip before installation, Oh well. Definitely worth the money.
November 3, 2011
Ordered this for a sig p2
Ordered this for a sig p250 compact, length is perfect. My only complaint is it's just a little looser on the bottom than the top. Good quality and improves my grip 1000%.
September 30, 2011
I bought one for each of
I bought one for each of my pistols, they fit perfectly on an FNP-45 and a Taurus PT-92, its a very tight fit, but thats not a bad thing; just takes a little effort to get them to slide on. They could stand to have one more finger groove at the bottom though; well worth the price though.
August 4, 2011
Put this on my Hi-Point 9
Put this on my Hi-Point 9mm pistol. Very tight to get on, but this was expected since it is not really meant specifically for this gun. Totally worth it though! Grip is much improved.
May 26, 2011
Great grip. I use em on m
Great grip. I use em on most of my tactical pistol grips. Super comfortable compared to that standard checkering on most standard grips. I know the checkering works great with gloves, but I don't use gloves too often. Nice for warmer climates.
April 24, 2011
Best $10.00 you will spen
Best $10.00 you will spend. Same grip every time improved my shooting from the first clip. A must have
March 12, 2011
nice grip gives me more c
nice grip gives me more control in my opinion great product fits my sig p250 full size hand gun it was kind of hard to get the grip over the end of the pistol grip but once it was on it worked in quite nicely and didn't have to do any trimming...but if you happen to live near a cheaper than dirt store you might want to check if they have it in stock first because i paid $22 after a $9.81 shipping fee and then went to the local ctd store here in town and found the same grip for the advertised price on this web site minus the 10 shipping fee so basically i paid $22 for a $9 universal hand grip
February 18, 2011
I got this today and inst
I got this today and installed it on my Hi-Point 995TS. It fit like a glove and was pretty easy to install. It fits my hand really well and it's made by Hogue. What else is there to say?
January 19, 2011
Fits a P22 excellently. S
Fits a P22 excellently. Stiffer rubber than Pachmayr. Feels great in hand.
November 11, 2010
I bought this for my High
I bought this for my High Point C9 9mm it fits good. It just needs a little trimming around the safety, but very happy with it. A good buy.
April 5, 2010
I put these on everything
I put these on everything. Got one on my glock, Got one on my sks, got one on my ak. Anything w/a moderate-size pistolgrip is fair game. Love that palm swell.
April 2, 2010
I just got this grip in t
I just got this grip in the mail today, and it fit perfect on my Taurus PT101. Makes the gun feel soooo much better in my hand. Haven't got to shoot with it yet but plan to tomorow. Im very pleased with it and excited to try it out. CTD = great shipping btw.
March 25, 2010
I got a Glock 22 for Chri
I got a Glock 22 for Christmas and have put about 500 rounds through it and love the gun. I finally got to go to the range with my Father-In-Law and he had this grip on his G 22. These grips were such a difference in the feel of the gun that I ordered mine this morning. These grips have a great feel and I would recommend it to everyone.
March 16, 2010
Put this on a SigPro 2022
Put this on a SigPro 2022 in 9mm. The grips were very comfortable already, but I wanted some front finger grooves. I will have to trim about 1/4' on the bottom aspect of the sleeve for a cleaner fit, as it just barely hangs over the magwell opening. Great purchase for $10.
March 11, 2010
No other slip-on grip bet
No other slip-on grip better than Hogue! Just bought another one for my new Glock 26.
March 6, 2010
I have had a Glock 17c fo
I have had a Glock 17c for like 5 years. Never did anything to it but something was always missing. Now I received my Hogue grips today. It feels solid. I mean I love my Glock because it is a Glock but it feels awesomely good. Grips feel so firm yet very grippy. Thanks Cheaper Than Dirt.
December 11, 2009
Just got this in the mail
Just got this in the mail today along with some other stuff. I installed it on my HK USP compact in .40 S&W and it fit quite well. A little trimming will be required for aesthetic reasons, but functionally it fits perfectly. Feels excellent as well, can't wait to take it to the range. Ordered on Monday, received today (Thursday) with 3-5 day shipping.
December 9, 2009
I love the Glocks angle b
I love the Glocks angle but I find the sides a bit lacking. Adding this grip fills the void and makes for the best feeling handgun I've used.
August 31, 2009
Fits and feels great. Bes
Fits and feels great. Best of all don't have to take grip apart to install. Slides right on and ready to go. If your hands get sweaty a must have. Also 'Cheaper and Dirt,' beats factory retail price.
August 10, 2009
After what seemed forever
After what seemed forever with a mix up on my order I FINALLY got the grip in yesterday...just in time to go to the range for my yearly firearms cert. at work. Before I put it on I fired a couple of clips off with the factory grips & then I put THIS on! I skeptical at first...how could a piece of rubber make as much difference as folks say they do? I wondered... 'Waste of $10' I thought to myself As I squeezed it onto the grip. fits my Zastava 9mm with no trimming..'ok this is getting better' I muttered aloud to myself. I gotta say, I was completely amazed at how much better my weapon fit my hand. Thought it was comfortable before...I would tell anyone who owns any gun to grab one of these for your favorite pistol. Grab one for all of them...I will be!!! ordering one for my Hi Point Carbine (yea,yea, yuck it up) and one for the SIG as well!!!
July 2, 2009
I got this for my XD... i
I got this for my XD... it fit very well and of course had to cut a little off for the 'grip safety'. the only problem with the rubber grips is the side has slight bulges which change the way the gun feels and pointing angle. Some people love it and say it helps them hold the gun better but I'm not too thrilled about it.Other than that, this is a great product for a good price. I wish they would have put that information on the box/item description
April 21, 2009
These grips make a world
These grips make a world of difference in the grip of my Glock. It wants to stick to your hand when firing. IF you have a Glock these are for you !
February 23, 2009
you gotta have one if you
you gotta have one if you own a glock i own 4 glocks and everyone of them has a hogue handall grip on it.
September 20, 2008
the best thing i have put
the best thing i have put on my glock model 22
August 27, 2008
Get a grip and let her ri
Get a grip and let her rip, absolutely no slip. Fits my Glock 21 perfect. Not to sticky and doesn't get in the way of anything. Wouldn't recommend if your hands are really small. Great product, buy it now and see for yourself.
July 1, 2008
this grip is a really nic
this grip is a really nice addition to any firearm with boring grips,i have three! on on my glock one on my hi point (i know, i know) and one on my ruger.it really ads support when you fire, i have big hands and this just fits like a glove, really snug tight fitit had to be trimmed down a bit for my hi point but you cant even noticeand if you are skeptical about having a grip with a clip release in the way u can just snip around it, really easy to cut to fit any gunhogue is a great product!
June 6, 2008
As said below, it is defi
As said below, it is defiantly worth the struggle. I got this onto my Glock 17, over a laser sight pressure switch taped down with electrical tape. I still managed to get it on all the way. A definite must for a good upgrade with a tight budget.
May 1, 2008
I love my Glock, but I ha
I love my Glock, but I hate the Glock grip. This sleeve makes it much more comfortable. It is a pain to get it on, especially if you have the newer Glocks with the finger grooves, but it is well worth it. You will be surprised how much better your gun feels in your hand with this on it.
March 27, 2008
I bought 3 of these grips
I bought 3 of these grips:This grip fits perfectly for my Glock 21SF. No modifications were neccessary. It took a grand total of 5 minutes to slide on, but after it was on you know it's not coming off. I absolutely love it. For my two S&W SIGMA 9MM I had to slide the grip on, center it, then cut off the extra rubber. It took 6 minutes to do both guns. When my wife and I shot them, it was like night and day. She absolutely loves the grip because it gives her a better handle on the firearm. I love it because of the control and accuracy improvement. It gives me a better handle on my weapon which gives me more confidence. That confidence allows me to focus more on hitting my target groupings rather than thinking about how hard I'm gripping the gun.I highly recommend this item to any Glock or S&W Sig owner...
February 13, 2008
I purchased one of these
I purchased one of these for my berretta px4 storm 9mm. I love it maes the gun feel lie it was made for my hand! i would reccomend this to anyone for a quick easy and cheap upgrade, or an addition to an alreadt favorite gun.
February 8, 2008
I had this grip on my glo
I had this grip on my glock23 and I've been trying to find another grip for my S&W 5906. I slipped it on the S&W and it worked perfectly on both guns. A great addition at a great price.
February 6, 2008
Bought two of these for m
Bought two of these for my Springfield XD 45 and my Beretta PX4 9mm. Fits both really well, a little work sliding them on, especially the XD. Also on the XD, had to do a little trimming on the top of the grip due to it sliding over the grip safety, but not alot. Definitely recommended for either firearm.
February 5, 2008
I bought 2 of these, one
I bought 2 of these, one for my beretta m84f and sig sauer 226. They are perfect. I had to do a bit of trimming for the beretta but that was no big deal. The best accessorie for a handgun. The only problem is that it gets caught a tad when you pull the pistol out of the holster but i can get used to that. buy it.
January 24, 2008
I use this on my service
I use this on my service pistol. I carry a 3G Glock 23, and this grip really fills the pistol out. It works with the factory finger grooves, and makes the pistol tighter in my hand. The only issue is that it rubs against my shirt. I just ordered a replacement because the left side of the grip wore to the point that it tore (took 2 years to wear that far). This is by far the best $10 upgrade you'll find.
October 14, 2007
This just showed up FedEx
This just showed up FedEx at my house today. It fits my 17 perfectly and, in my opinion, greatly improves the feel of the gun. The pattern work on the sides match those of the gun so it looks like a part of the factory grip. Overall, great quality and well worth the money.
September 19, 2007
Will this grip fit sw9f? Correctly..
Answer:
Yes this should fit.
Will this fit a TH40C?
Answer:
Yes
Will it fit S. & W. 5906
Answer:
It will probably fit.
Will this fit a sig sp2022 ?
Answer:
Yes, it will.
Think it should just checking will this fit a Ruger American 45 acp pistol with a large backstrap
Answer:
Yes, it will fit.
Will this fit a full size Ruger American 45 acp with large backstrap
Answer:
Yes, it will.
Do you make a Hogue grip for the hi point c9
Answer:
We don't make anything, we're a retailer, not a manufacturer. This slip on grip will fit almost any semi auto handgun.
Will this grip fit a FN 509?
Answer:
Yes, it should.
Is this grip too large for an FMK 9C1 Gen2?
Answer:
No, it's not.
Will this fit a TP9sf Thanks again, Mark Cutter
Answer:
Yes. It will fit any large frame auto that does not have a grip safety.
Will this fit on a Taurus PT-92 9MM ?
Answer:
Yes, it will fit a PT-92.