Why load your revolver one cartridge at a time? With HKS Speedloaders, instantly load all cartridges into your revolver! These speedloaders securely hold rounds until released with a turn of the knob. Proven by decades of use in law enforcement.
Fits:
HKS Speedloader M Series CA-44
.44 Special/.44 Remington Magnum
5 cartridge capacity
Works best with cartridge jiggle
Polymer/Aluminum
Black
Fits:
Charter Arms/Rossi/Taurus/S&W 5 shot .44 Special/Magnum Revolvers
Fits:
HKS Speedloader M Series CA-44
.44 Special/.44 Remington Magnum
5 cartridge capacity
Works best with cartridge jiggle
Polymer/Aluminum
Black
Fits:
Charter Arms/Rossi/Taurus/S&W 5 shot .44 Special/Magnum Revolvers
37 Ratings
Work as expected
They work as I expected. The shells stay in the loader until you turn the knob.
August 20, 2023
Taurus judge
Works great for my Taurus judge.
April 28, 2023
good speedloader
same as every other HKS i've ever owned, top shelf works like a dream
September 27, 2022
Speed Loader
Love this thing
May 20, 2022
HKS M3
Works, but not on new King Cobra.
May 9, 2021
Fits the EAA 357 Windicator
I forgot to include that it fits EAA 357 magnum Windicator. However I find that the A 10 fits a tad bit better if you change your mind and pull a loaded speed loader back out. It seems to hand up on the grip, but it does come out just fine otherwise. All in all it works just fine.
September 15, 2020
HKS makes a very good and affordable loader
I can't say anything bad about HKS. I have a few and they all work fine Pros: Easy To Use
September 12, 2020
The products were great but not compatible with my 460 Smith
C&D did great job it was my fault for all problems that came about.
July 2, 2020
Works great
These speed loaders are of excellent quality especially for the price. They fit perfectly inside of a speed six revolver and have cut my reload time by 75% on average.
April 30, 2020
These speed loaders are superb
These speed loaders take all the stress and worry about having to send more bullets toward your target.
October 21, 2018
work great
speedloaders work fine , always practice any reloading technique till reliable .
January 5, 2018
Pleased am placing an order for additional one.
Securely holds extra rounds. Even carry in coat pocket.
October 28, 2017
Good so far
This is my first "twist" speed loader, so, I was a little hesitant. But, after testing it seems to be easier than the push button ones I own. Definitely easier to do one handed. Also, the quality of the materials seems good.
September 7, 2017
This is a must have for anyone who owns a revolver!
No more fumbling with rounds while trying to reload. The grip on this is great, bullets are secure and release is smooth. Sure makes reloading the 6 shooter easy and quick!
August 23, 2017
Good price and it works.
Good price and it works. Works for my Ruger GP100 and also my Chiappa Rhino.
March 4, 2017
Bought it, used it, like
Bought it, used it, like it! Great item for the price.
November 23, 2016
Works great
Works great
January 31, 2015
I like these speed loader
I like these speed loaders. They sure make reloading the pistol a lot faster.
August 23, 2014
I bought a few HKS and Sa
I bought a few HKS and Safariland speed loaders for my GP100. Both are excellent products, but the HKS has a few minor downsides. First, the release mechanism is a simple twist so you have to brace your cylinder for the shells to release. Second, the twist is a little too easy and it feels like it could be activated while drawing the loader from a mag pouch. The Safariland uses a push release that is difficult to actuate accidentally, and with no need to brace the cylinder. That said, the release is smooth and the product is well made.
June 2, 2014
Yup it fits the judge, ju
Yup it fits the judge, just saying. no issues.
May 18, 2014
I had one of these for my
I had one of these for my GP100 and 3 of a different brand. The others would stick and were difficult to reload. I threw them in the trash and bought 3 more of the HKS brand. They work like they should.
April 2, 2014
Title says it all. Bought
Title says it all. Bought three of these and have had no trouble with them. Very satisfied.
March 20, 2014
I bought this to try on m
I bought this to try on my Taurus Judge......It Works!! It doesn't hold .410, but holds .45LC well with a lil jiggle room. This is my 1st speedloader so I don't have much else for the review, but it works great for me!
March 10, 2014
Yes, I still carry a whee
Yes, I still carry a wheel gun and these speed loaders are ideal for extra rnds & ease of storage. Reliable and easy to use.
January 15, 2014
Of course HKS speedloader
Of course HKS speedloaders do just what they are supposed to do-reload fast as a pistol magazine with practice-but I especially love that I share them with the classic 1970's Charter Arms .44 Bulldog I have, AND my Taurus .44 Magnum Tracker 5 shot revolver. It's great that it fits all K-frame sized holsters with its medium frame, and coincidentally being the shared speedloader with my beloved, ugly but cherished Bulldog! To keep it straight, I use paint markers and the knob is red for .44 magnum, blue for .44 special. Because it is always better to have and not need, I keep at least four speedloaders on hand when carrying-and most often in either a nylon speedloader pouch in the pocket, or those neoprene asthma inhaler pouches, they fit two speedloaders easily and keep them from rattling around in the cargo pocket and releasing rounds. As usual, CTD has the best prices on them!
June 20, 2013
Sometimes the cartridges
Sometimes the cartridges do not seem to line up and I have to wiggle the loader around to get the cartridges to load. Tried with same cartridges in different order and other combinations of cartridges. Seems to hang up on my rubber Pachmyer grips. Maybe the back end of the unit should have its outside edge beveled.
July 7, 2012
Bought for use with Smith
Bought for use with Smith & Wesson Governor. Works great.
August 22, 2011
This speedloader works fo
This speedloader works for my Smith and Wesson Governor. With a couple of these and a handful of .45ACP moonclips, I am set for a full day at the range.
August 10, 2011
I am impressed with these
I am impressed with these HKS speed loaders. They each hold the rounds like they should and all the rounds line up perfect with the cylinder chambers for a quick reload.
August 1, 2011
Bought 4, all work great
Bought 4, all work great for my S&W 357 Mod686. Yes they are mainly plastic, but very tough. I'm ordering 4 more for backups.
March 17, 2011
Bought 2 of these to use
Bought 2 of these to use to hold quick reloads for my Taurus Judge. .45 Colt fits great, but don't expect them to hold the .410 loosely enough to drop out when needed. Note: they weren't designed to hold shotgun shells so this isn't a complaint.
February 24, 2011
It loads my Ruger quickly
It loads my Ruger quickly. But, make sure you practice as it takes a dozen times to become proficient.
December 20, 2010
They work very well. Easi
They work very well. Easier than other brands but they feel flimsier and are a bit expensive for being all plastic.
October 2, 2010
Very pleased with the pro
Very pleased with the product. Use it with success in both my Security Six snub & Service Six. Works well. Sometimes hangs up on the factory wood grip & is a somewhat a tight fit. Perfectly functional, though. Buy a couple!
March 13, 2010
I have owned several of t
I have owned several of these speedloaders over the years for my S&W Models 57 and 58. Last year, I purchased a Taurus Raging Bull in .41 Magnum. I placed a set of snap caps into a speedloader to see if it would work with the Raging Bull. It was a perfect fit!
March 6, 2010
Speedloader works great w
Speedloader works great with both .357 and .38.. S&W 686 .357 magnum
March 14, 2009
I got this speedloader fo
I got this speedloader for use with my Taurus Tracker.44 Special,however, I find that I works much better with my Taurus Judge .45Long Colt. The fit is rather loose with the .44 Special catridge.Sincerely,James E. Sims, Jr.U.S. Army Special Forces
February 17, 2009
Will this work on a 5 shot tarus judge. .45 long colt?
Answer:
No
Is it plastic?
Answer:
This item has polymer and aluminum construction.
will this work with a S&Wmodel 69?
Answer:
Yes this is compatible with a S&W Model 69.
Will this work with a Taurus 905, 9mm Luger rounds. 5 shot?
Answer:
No this will not fit.
Will this work with a Taurus 905?
Answer:
No this will not work.
Based on the info you provided so far, I think that this will work for the Taurus Tracker 44 mag, correct??
Answer:
Correct, this should fit.
Will this work for S&W 442?
Answer:
No, this is for 44 Special revolvers and current 442s are chambered in 38 Special. I recommend item # GNS-124-003.
Does this fit the 5shot polymer Taurus Judge Public Defender .45LC?
Answer:
No. Per the written description it is not compatible with the Public Defender.
Will this work with .45 acp? Specifically Tracker 455.
Answer:
No it will not.
Will this work for the 454 Raging Bull (Taurus)
Answer:
No, the HKS M Series 5 Shot .44 Special/Magnum Speedloader will not fit a Taurus revolver chambered in .454 Casull. Best option we have that will work is item # GNS-081-004.
Will this work on Taurus 454 cal
Answer:
No, the HKS M Series 5 Shot .44 Special/Magnum Speedloader will not fit a Taurus revolver chambered in .454 Casull. Best option we have that will work is item # GNS-081-004.
Will this work for 45 LC?
Answer:
This will not work for .45 Long Colt, try item HKS-124-012