Thumb-operated lever arm is the secret to fast- easy operation. No sore fingers. No fatigue. Capable of loading 15 rounds in 18 seconds. Works equally well right or left handed. Faster and easier than ever before, The HKS Magloader quickly loads double stack Glock, H&K and S&W Sigma magazines. It's this simple: magazine slips into loader and is held in by hand. Depress thumb lever and load. That's it!
Glock 17, 19, 22, 23, 26, 27, 31, 32, 33, 34, 35, 37, 38 and 39.
H&K USP 9mm and .40 S&W.
S&W Sigma 9mm and .40 S&W.
DISCLAIMER: “Glock” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Glock 17, 19, 22, 23, 26, 27, 31, 32, 33, 34, 35, 37, 38 and 39.
H&K USP 9mm and .40 S&W.
S&W Sigma 9mm and .40 S&W.
DISCLAIMER: “Glock” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
8 Ratings
I got this for a 40 Glock
I got this for a 40 Glock 23.... Works like a charm...Really saves on the fingers and is so easy to use.
December 11, 2013
It does what it's suppose
It does what it's supposed to. It takes a little getting used to, but it does help a bit with loading. Sometimes, the device can slip out of position and stop working, so there's a bit of a learning curve. I probably won't buy a replacement when this one breaks.
December 18, 2012
Cheap - Yes; Plasticy - Y
Cheap - Yes; Plasticy - Yes; Functional - Yes. Figured I'd try this one before spending more on something else. Glad I did! As of now, it's worked well on my full size M&P 40. I say 'well' because you have to hold it just so or it hits the top of mag when you press down. However, you will swear that each time you press down will be the last because of the cheap plasticity feel. If I get over a year out of it (couple thousand rounds), I'll consider it a good value and buy another when it breaks.
August 30, 2012
It worked perfectly on H&
It worked perfectly on H&K USP 9mm. I did some research so for this price this is one of the better Magazine Speedloader for the USP9. Yes, it only works if you have standard magazines and not the high capacity ones. If you have both types I suggest you get the HKS adjustable universal magazine speedloader.
June 27, 2010
Ok, well this will make l
Ok, well this will make loading easier. Only tested on Glock 23 factory 13 round double stack mags. Is a little cheap not bad for the money. It will do what I need for the time. It does look as if it might break if loading in a hurry. The thumb hinge area flexes entirely too much. But like I said for the money, you just need on buy it.
June 2, 2010
I was very disappointed i
I was very disappointed in this speedloader. It is cheaply constructed and it is very limited in application. It works with Glock 17 and Glock 26 (10 rounds). It will not work with Glock 26 mags with an extension. It does not work with either S&W Sigma 9 or 40. It was supposed to be more universal. I ordered this when the Glock factory mag loader was out of stock (for a third the cost). I'd ship it back but it was cheap enough to outweigh the return shipping costs.
January 10, 2010
This loader is unbelievab
This loader is unbelievably fast. Not only do you get to shoot faster, fingers don't hurt at all after putting them in. Works great even with the larger bullet mag.
September 8, 2009
These things are a Godsen
These things are a Godsend. Makes loading the Glock 17 mags a snap. It's almost as fun loading the 9mm rounds into the mags with these things as it is to shoot the rounds out the barrel of my Kel Tec S2k. It also minimizes your touching of the ammo - keeps moisture and oils from compromising the casings.
May 5, 2009
Will this work on s&w 40 sdve?
Answer:
Yes this will work.
Will this work for a G20 double stack magazine?
Answer:
Yes it should.
Will this work to load a 25 round double stack glock 22 magazine ?
Answer:
Yes, it will work.
does the maker of this item have a model for a taurus pt111 g2? i know you can't stock everything!
Answer:
The best loader for any pistol, inclulding your PT111, is the Maglula UpLULA Universal Loader, item MAG-242-014
does the maker of this item have a model for a taurus pt111 g2? i know you can't stock everything!
Answer:
The best loader for any pistol, inclulding your PT111, is the Maglula UpLULA Universal Loader, item MAG-242-014
Will this work with Sig Sauer P226 magazines?
Answer:
Item HKS-124-020 would be a better fit for your P226 magazines.