The Franklin Armory DFM AR 308 Magazine is specifically designed to bring your modern sporting rifle into compliance with state regulations. It converts your AR platform rifle to a fixed magazine design required by some more restrictive states. The DFM mag requires disassembly of the action to remove the magazine by tilting the upper receiver out of the way and removing the mag from the top of the lower receiver. Limiting tabs prevent the release of the magazine from the bottom of the lower through the mag well. It's designed to be used with the mag catch which prevents the tabs from resting on the lower receiver.
Improper installation with the magazine positioned below the mag catch may cause the limiting tabs to mark your lower receiver. Additionally the feed lips will likely sit too low for the magazine to function properly.
Installation will require removing and reinstalling your existing bolt catch.
Franklin Armory also offers a modified bolt catch designed for easy installation of the DFM magazine. This is optional but highly recommended.
Specifications and Features:
Franklin Armory DFM AR 308 Magazine 54805
.308 Winchester or 7.62x51mm NATO
Restrictive State Complaint CA/CT/NY
Converts AR platform rifles to a fixed magazine design.
Requires disassembly of the action to remove the magazine.
Limiting tabs prevent release through the bottom of the mag well.
Can only be removed from the top of the lower when the upper is tilted out of the way.
California, Connecticut, and New York restrictive state compliant AR platform rifles chambered in .308 Winchester/7.62x51mm NATO