ETS magazines are made from advanced polymers that provide extreme impact resistance so they won't crack or break when dropped. With superior temperature tolerances our magazines won't become brittle over time, even when exposed to harsh environments, chemicals, or extreme cold. Its durable construction eliminates creep so the feed lips and body won't spread when being stored long term, even when fully loaded. These new for Glock Magazines provide a top notch alternative to an OEM magazine and available in multiple sizes.
Features and Specifications:
This is not a Glock Factory Product, it is an after market Product
Manufacturer Number: GLK-18-40
Elite Tactical Systems for Glock Magazine
Caliber: 9mm Luger
Capacity: 40 Rounds
Body Material: Polymer
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Chemicals, UV, Temperature resistant
Compatible with Gen 1 through Gen 4
Compatible with Glock and aftermarket floorplates
Finish: Smoky Translucent
Fits:
Glock 17, 18, 19, 26 and 34
DISCLAIMER: “Glock” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Features and Specifications:
This is not a Glock Factory Product, it is an after market Product
Manufacturer Number: GLK-18-40
Elite Tactical Systems for Glock Magazine
Caliber: 9mm Luger
Capacity: 40 Rounds
Body Material: Polymer
Spring Material: Steel
Follower Material: Polymer
Baseplate Material: Polymer
Chemicals, UV, Temperature resistant
Compatible with Gen 1 through Gen 4
Compatible with Glock and aftermarket floorplates
Finish: Smoky Translucent
Fits:
Glock 17, 18, 19, 26 and 34
DISCLAIMER: “Glock” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “Glock” on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by GLOCK, Inc.. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
10 Ratings
Love the high capacity and clear plastic. Very helpful at the range. Price is great too!
September 4, 2023
I highly recommend this magazine.
I've had zero problems.
January 18, 2023
With it
Good mag for the money.
January 7, 2023
I like it good quality
October 19, 2022
Exactly as pictured
Got 41 rounds loaded and can see all of them.
July 15, 2022
Meh
Don’t know if I got a bad one but none of my guns like this mag. Feeding is very poor.
May 24, 2022
Big mag for the range
Works great and looks pretty cool also!
March 15, 2022
Bingo
Loved it so much I bought 3 more.
February 2, 2022
defect?
Not sure if defect or just hot garbage, bottom plate shot off at 3/4 capacity when loading first time. thou only on one of the two that I purchased.
June 6, 2020
Will be buying more
Only issue i have had is when reloading the magazine if you're not paying attention there is a potential for 2 bullets aligning on the same side instead of double stacking like normally.
January 7, 2020
Will this fit a psa dagger 9mm compact ?
Answer:
Yes it will
Will this fit Glock 17 Gen 5?
Answer:
Yes it will.
Will it fit a 19 x?
Answer:
Yes this will fit.
Will this fit a Kel-tech 2000?
Answer:
If your Kel-Tec Sub 2000 has the Glock magazine well insert installed, then yes this will fit.
Fit gen 5 Glock 19?
Answer:
Yes it would.
Will this fit a Hi Point 9mm C9 ???
Answer:
No it will not. I recommend item # 2-MGMKSCLP10C.
Will this fit a ruger 9mm carbine?
Answer:
If you have swapped the magazine well to accept standard Glock magazines, than yes this will fit.
Will this fit Gen 5 Glock 45?
Answer:
Yes it will.
Will this fit a Glock 43?
Answer:
No it will not. Try item 122814
Will This fit a glock 19 gen 3 compact ?
Answer:
Yes it will.
Will it fit a glock 26 gen4?
Answer:
Yes it will.
Will it fit a glock 26 gen4?
Answer:
Yes it will.
Will it fit aSarsilmaz USA SAR 9?
Answer:
No it will not.
Will it fit a gen 5 Glock 19?
Answer:
Yes it will.
Would this fit cz p10c?
Answer:
No it will not fit the CZ P-10C.
Will it fit a hi point c9
Answer:
No it will not.
Will this ship to California?
Answer:
Due to company policy and the high legality of CA's firearms laws, we unfortunately cannot sell/ship this time to residents of CA.
Will this work in a Draco nak9x?
Answer:
Yes
Will this fit in a glock 45
Answer:
Yes
Will it fit Glock45 Gen5 (9mm)?
Answer:
Yes
Will this ship to Texas? And will it fit a Glock 19 5gen
Answer:
Yes and yes
Will this ship to New York State
Answer:
No
Will it fit the 19x?
Answer:
Yes it will.
The description says compatible with Glock 19 gen 1-4. What about gen 5?
Answer:
This will work with a Gen5
Will it fit a Glock 31 .357 sig
Answer:
Would it work for a different brand? I have I Ruger.! I'm thinking bc it's 9mm it will work but just wanna ask b4 I purchase.?!
Will this fit in a Century Arms Canik TP9SF ONE 9mm Luger Semi Auto Handgun?
Answer:
No, you need item # MAG-428-322.