EGW Gives you a Solid Scope Mount for Your Browning WSSM
Make sure you have a solid base for your scope to mount on with the Evolution Gun Works One Piece Picatinny Rail Scope Mount. The Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Browning has started producing their 22-250 and 204 Ruger in a Super Short Action (SSA) Spacing. EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike. We STRONGLY suggest taking your gun to a qualified and competent gunsmith to have this mount installed.
Older model X-Bolts had front screw holes that were threaded to the top of the receiver. Newer models now have a deeper countersink. This countersink prevents the mounting screws from engaging multiple threads and can cause the holes to strip out in the receiver. We have changed the depth of the countersink on mounts made after January 2021. The date code can be found on the bottom of the mount. If the last 2 digits are 21 or higher, your mount has the deeper countersink.
Older mounts may require longer front screws. We recommend test fitting the screws before Loctiting to check for proper engagement. If the screws only engage with one thread, please contact EGW to provide longer screws (.335" OAL).
EGW Browning X-Bolt WSSM Picatinny Scope Mount Specifications and Features:
- Manufacturer Number 81016-B
- One Piece Picatinny Rail Scope Mount
- Right Handed
- 0 MOA
- 5.790" Overall Length
- 0.44 Inch Height
- .7 Inch Front and Rear Spread
- 2.825 Inch Center Spread
- Extruded Aluminum
- Matte Bronze Hardcoat
Browning X-Bolt WSSM (SSA)
And newer 204 Ruger and 22-250 Firearms
#6-48 X 1/4 Screws and T-10 Bit Included