Crimson Trace has been setting the standard since 1994
The CTS-1550 is an Ultra-Compact Open Reflex sight with a 3 MOA red dot that is designed for pistols. The CTS-1550 can improve your pistol's performance almost instantly. Installation is easy since the CTS-1550 uses an industry standard J-Point mounting interface. The ambient light sensor automatically adjusts to the lighting conditions and turns the device off when the cover is used. The battery is located underneath the CTS-1550 which allows for co-witness with the pistols iron sights. The high efficiency LED will provide years of service.Crimson Trace CTS-1550 Compact Open Reflex 3.25 MOA Red Dot Specifications and Features
- Crimson Trace Item number 01-01960
- 3 MOA Round Aiming Dot
- Battery Underneath
- Low-Profile Snag Free Design
- High efficiency LED
- Shock, Impact, Fog, Vibration Resistant
- Industry Standard J-Point Mounting Interface
1 Rating
Unit 1550 EXCELLENT UNIT
Had a gun specialist install the unit.Have use it indoors,.so I don't have experience with the auto light sensor...quick sightingsPleased with everything and you won't be disappointed ☺️.Can't beat the price!!! P.S. installed on my Shield Plus.
October 14, 2022
Will this fit the PSA Dagger compact?
Answer:
With the correct adapter plate, this will fit. Check out item # 2-RA45R004A.
Will this fit the Taurus GX4 toro directly?
Answer:
It should.
What type of foot print does this red dot have. I want to mount it to my p365 380. My p365 380 had a Rmsc foot printWill it work?
Answer:
It has a J-Point mounting interface which is the same as the SHIELD RMSc footprint.
Would this fit a ruger max 9? If so do I need to get a specific mount as well?
Answer:
This will fit the Ruger Max 9 and it should be a direct fit, so no adapter plate or mount is required.
Will fit on Steoger-9c handgun?
Answer:
If you have the correct adapter plate, then this will fit.
Will this fit on the new s&w 5.7 and if not witch one will work ?
Answer:
Yes this should fit.
WILL THIS FIT A S & W SHIELD PLUS?
Answer:
If your slide is cut for an optic, then yes this should fit.
Will this fit a P365 X Macro without an adapter?
Answer:
Yes this is a direct fit.
Will this fit a springfield xdm 9mm?
Answer:
If you have the correct adapter plate, then yes this will fit.
Will this fit on a gen 3 g19, that has the slide cut out already?
Answer:
If you have the correct adapter plate, then yes this will fit. However, the necessary adapter plate is not typically included with Glock MOS models, as this optic was designed for smaller slim frame pistols such as the Glock 43. You may find better fitment with an optic that is designed more for full size handguns, such as a Doctor/Noblex footprint. Check out item # 131521.
Will this optic fit the Springfield Hellcat Pro?
Answer:
Yes this should fit.
Do it fit m&p40 s&w ?
Answer:
If you have the correct adapter plate, then yes this will fit.
will this fit on a sig p320 compact?
Answer:
If you found the correct adapter plate, then this could fit. The P320 RXP Compact slide is cut for optics with a ROMEO1PRO footprint. Check out item # 113464.
Springfield xdm elite 3.8 barrel 10mm will this fit it? Thanks for your time
Answer:
Your model has a Doctor/Noblex footprint and this optic has a Shield footprint, which is designed for smaller single stack handguns. You may be able to find an adapter plate, but I would recommend a full size red dot with Doctor/Noblex footprint. Check out item # 2-CMTCTS-1300 or 2-CMT01-00560.
Is there a red dot that I dont need a plate for the xds 45 mod2?
Answer:
This optic has a 'Shield' footprint. If your slide is cut to fit a Shield footprint, then no plate is required. If your slide has a different footprint, then an adapter plate is required.
Will this for canik tp9sfx?
Answer:
Yes however you would need an adapter plate as the Canik tp9sfx has a RMR base.
Will it work on a Springfield xds 9 3.3 ?
Answer:
If your XDS slide is cut to accommodate an optic with a Shield footprint or you have the correct adapter plate, than yes this will fit.
will it work with XDS 45 3.3 mod 2 with OSP?
Answer:
Yes it will.
Will this fit on aGlock model 22?
Answer:
With the correct adapter plate yes it will.
How does this sight turn on ?
Answer:
The item is always on and adjusts to light conditions. it is turned off by using the cover.
Will this fit the Hellcat osp?
Answer:
Yes it will.
Will this fit the S&W 9 2.0 with optic?
Answer:
If you have the correct adapter plate it will
Will this fit the Springfield xd9 with 4" barrel?
Answer:
With the correct adapter plate it will fit
Do this fit the Springfield hellcat?
Answer:
It will with the correct adapter plate
Will it fit on a 45 ACP Tactical Pistol
Answer:
That would depend on the make and model of your tactical pistol