The Official MCK/Micro GLOCK Conversion Kit From Command Arms Accessories
The Command Arms Accessories MCK Micro Roni Conversion kit is designed to allow you to place your pistol into the chassis without having to disassemble your pistol. The Ergonomic finger groove grip provides you with extra stability. The Top picatinny rail allows for several combinations of sights and or optics. The chassis is an ambidextrous system and you will notice how fast and easy the firearm handles. This particular polymer chassis features a Black finish.Command Arms Accessories Conversion Kit (Tan) Specifications and Features:
- CAA MCK21T
- Conversion Kit Chassis
- Micro Roni Conversion Kit
- No pistol disassembly required - Just place pistol into the kit, lock, and go
- Allows for multiple handgun models into one platform
- Ergonomic Finger Groove Grip for more stability
- Top Picatinny rail, allowing a combination of sights and/or optics
- Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
- Ambidextrous fast and easy handling
- Right-folding stock arm brace for easy concealment and carry, locks in the folded position
- Front spare magazine holder for a faster reload
- Built-in charging handle allowing for quicker assembly/disassembly
- Exposed slide release for direct contact and easier use
- Polymer Chassis
- Overall Width 2.48"
- Overall Height 5.70"
- Overall Length 13.70"
- Tan Finish
- Stabilizer
- GLOCK Pistol
- Advanced Kit
- GLOCK 20/21 Gen3, 4, and 5
5 Ratings
Glock
Looks very good on the glock
January 25, 2023
Fast delivery, I purchased this for my Glock 20. I really like it you can buy different attachment’s for it to your liking. Can’t wait to go out to the range again! At first it took several tries to get it to accept the gun but after completing it a couple of times it was easier. Just wished it would have came with something to coat the front of the gun with Because the front sight was a little dark with from the powder . Other than that glad I bought this!!
August 24, 2022
Easy to put Glock in. Fires true especially when I adjusted my red dot.
May 20, 2022
A fun concept and a joy to shoot. Few minor issues and not much practical use but a fun time putting lead down range that makes your pistol look more aggressive than it is.
December 19, 2021
Just became my new primary
This thing is too much fun. So much that I had to set up another plate carrier to run with it. Although I wish I had known this was the Gen1, and was missing out on some features on the Gen2, I still like and highly reccommend this piece. Pros: Ability to mount various accessories Cons: Charging handle is very small
September 28, 2020
Will this fit a Glock 20 Gen 5?
Answer:
Yes this will fit.
What kind of gun goes in this?
Answer:
This kit is designed to fit the Glock 20/21 Gens 3 and 4.
Does it matter what generation you have. I have a Glock 21 gen4. Can be changed with any generation?
Answer:
This will fit the GLOCK 21 Gen 4, but it's not compatible with all generations.
Do they make one of these for a glockenspiel 17 ?
Answer:
Yes, in a a lot of different flavors. Pay close attention to the written descriptions for fitment. https://www.cheaperthandirt.com/command-arms-accessories/parts-and-accessories/parts-by-gun-model/glock/17-17l-34/accessories/?srule=product-name-ascending
I have a glock 21 Gen 4, does this fit?
Answer:
Yes this will fit.
Will this fit my glock 21 gen 5?
Answer:
Yes this will fit.
Will this fit a Glock 19x ?
Answer:
No this will not fit. Try item # 7-MCKGEN2TU or 7-MCKGEN2W.
Will this fit gen 4 41 glock .45?
Answer:
No this will not fit.
Will a Glock 43X fit and work in this?
Answer:
No this will not fit. Try item # 129626.
Is this considered a handgun still if I put my gun in it or is it considered a (sbr)?
Answer:
The conversion is a chassis with a pistol brace for your handgun. It is not considered an SBR.
Will this fit Glock 21 sf gen 3?
Answer:
If your Glock 21 SF has a universal Glock rail, then yes this should fit.
Would it fit a Glock 17?
Answer:
No Try item 109181
Will a G21 gen one is what I figure because it has no gen on it fit this, if not do you have one that will?
Answer:
No, unfortunately CAA does not make a Micro Roni that is compatible with the Gen 1 models. These conversion kits attach to the pistol using the accessory rail below the pistol's barrel and the Gen 1s do not have this rail.
Does it fit glockenspiel 27 G4?
Answer:
No this will not fit. If you have a Glock 27 Gen 4, than I recommend item # 129617 or 136689.
Can I get this for Smith and Wesson sdve 40?
Answer:
No this will not fit. I recommend item # 140377.
Will a cm9 fit in this?
Answer:
No this will not fit.
Hello is there one for a Glock 23 ?
Answer:
We do carry a Glock 23 compatible version of this item. Check out item # 109177.
Is there one that will fit my Polymer 80 large frame pf45?
Answer:
Unfortunately Command Arms does not currently make a Micro Roni compatible with the PF45.
Will it fit a ruger p89?
Answer:
No it will not.
Do they make a sling for this?
Answer:
any standard sling could work.
Will this fit any other guns or just GLOCK?
Answer:
This will only fit Glock 20/21 Gen3 and Gen4 models.
Can this fit a Glock 41 gen 4?
Answer:
No it will not.
I HAVE A GLOCK 17 GEN 5, I NEED A CONVERSION KIT TO FIT AND WORK WELL WITH THAT WEAPON ?
Answer:
No this will not fit. I recommend items # 109178 or 122360.
Do you have one that fits Glock 27 ?
Answer:
Yes, check out item # 129617 and 136689.
Does this kit fit 9mm shield?
Answer:
No it will not. I recommend item # 133757.
Will my 40rnd wind up round mags fit this monstrosity?
Answer:
They should this does not hinder the Magwell.
Will this fit a Glock 45?
Answer:
If you have a Glock G20 or G21, which are chambered in 45acp, than this item will fit.If you have a Glock G45, than this will not fit and I recommend item # 7-CAAMCKT.
Will this work on the other 10mm Glock makes - the Glock 40?
Answer:
No it will not.
Does this work with Glock 21 gen 3 .45 acp?
Answer:
Yes it will.
Will this fit a polymer 80 glock 21? And if not why not?
Answer:
No it will not. Because a P80 frame is not actually a GLOCK. The MCK21 is manufactured to very precise specifications and slight variations in the P80 design mean that the GLOCK Micro Roni's do not fit the P80.
Can you put a compensator on it ?
Answer:
The manufacture did not design it with that intention.
Will a PF45 Glock 21 SF fit?
Answer:
No it will not.
Are the pop up sights are included?
Answer:
No, sights are sold separately. You can use standard same plane AR-15 sights. I would recommend item # SCP-177-009.
Will this fit the 21 Gen 3?
Answer:
Yes it should.
Do you use your own barrel? If so do I need a extended barrel
Answer:
This item does not require any type of barrel extension.
Is this a gen 2 Model?
Answer:
It appears to be an Gen1 MCK model.
Will this fit 21sf?
Answer:
It will only fit the GLOCK 21SF that has the accessory rail.
Will this fit Glock 41 gen 4?
Answer:
No it will not. Try item 7-MCK3441GEN2
Will this fit a Glock 22 gen 4?
Answer:
No it will not. Per the written description: Fits: GLOCK 20/21 Gen3 and Gen4
will this work in glock gen 4 #23 and #27 ?????
Answer:
No it will not. Item# 122360 will fit your G23, Item# 7-MCK2627 will fit the G27.
Can it fit to glock 30 gen 4?
Answer:
No it will not.
Will a G30SF fit with this model?
Answer:
It is not designed too.
Can work with a Apx ?
Answer:
No it does not. CAA does not currently make a MCK Micro Roni for any of the Beretta models.
Will my Glock 21 fit and work in this item, no gen# on it??
Answer:
This will not fit the Gen 1 or Gen 2 GLOCKS.
Will it fit a Beretta APX? If not what will?
Answer:
No it does not. CAA does not currently make a MCK Micro Roni for any of the Beretta models.
Will it fit my Beretta APX?
Answer:
No it does not. CAA does not currently make a MCK Micro Roni for any of the Beretta models.
Will this work with a Walther?
Answer:
No it does not. CAA does not currently make a Micro Roni MCK for any of the Walther models.
Does any company make a similar product for a model 1911?
Answer:
No. Not at this time.
Can I use with a beretta 92FS?
Answer:
No. CAA does not make an MCK Micro Roni for any of the Beretta's.
WILL THIS WORK ON GLOCK 21 GEN 1 ?
Answer:
No it will not. CAA does not currently make a MCK Micro Roni for the GLOCK 21 Gen 1.
Will this fit Glock 19, if no what will?
Answer:
No it will not, item 7-CAAMCK would fit a G19
Will it fit smith & Wesson mp2 9mm?
Answer:
No it will not
I see it fits glock 20 gen 3 and 4....by any chance does it fit a gen 1
Answer:
No it does not, it interfaces with the built in rail on the Gen 3 and Gen 4 models.
Will it fit a Glock 30s
Answer:
No it will not.
will this fit the Glock 21sf?
Answer:
Yes
Will this fit glock a 21sf
Answer:
Yes it will.