The Official MCK/Micro Glock Conversion Kit From Command Arms Accessories
The Command Arms Accessories MCK Micro Roni Conversion kit is designed to allow you to place your pistol into the chassis without having to disassemble your pistol. The Ergonomic finger groove grip provides you with extra stability. The Top picatinny rail allows for several combinations of sights and or optics. The chassis is an ambidextrous system and you will notice how fast and easy the firearm handles. This particular polymer chassis features a matte black finish.Command Arms Accessories Conversion Kit (Tan) Specifications and Features:
- CAA MCK21TA
- Micro Roni Conversion Kit Chassis with Advanced Kit
- No pistol disassembly required - Just place pistol into the kit, lock, and go
- Allows for multiple handgun models into one platform
- Ergonomic Finger Groove Grip for more stability
- Top Picatinny rail, allowing a combination of sights and/or optics
- Side Picatinny rails for mounting additional accessories, i.e… thumb-rests
- Ambidextrous fast and easy handling
- Right-folding stock arm brace for easy concealment and carry, locks in the folded position
- Front spare magazine holder for a faster reload
- Built-in charging handle allowing for quicker assembly/disassembly
- Exposed slide release for direct contact and easier use
- Polymer Chassis
- Overall Width 2.48"
- Overall Height 5.70"
- Overall Length 13.70"
- Tan Finish
- Stabilizer
- Advanced Kit
- Polymer Pair Side Rail Thumb Rests (MCKTHR)
- Push Button Sling Swivel (MCKPBSS)
- One Point Sling (MCKOPS)
- Flashlight that fits MCK and Micro Roni 17/19 Chassis (MCKFL)
- Polymer Front Flip-Up Sight (MCKFBUS)
- Polymer Front Rear-Up Sight (MCKRBUS)
- Glock Pistol
- Glock 20/21 Gen3 and Gen4
Note: Here is the ATF's latest rule regarding the use and legality of pistol braces. Installing a pistol brace may convert your firearm into an SBR and all NFA rules will apply.
Latest ATF Pistol Brace Rule
DISCLAIMER: Glock is a federally registered trademark of Glock, Inc. an d is one of many trademarks owned by Glock, Inc. and Glock Ges.m.b.H. Neither Cheaper Than Dirt!, nor this site are affiliated in any manner with, or otherwise endorsed by, Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock pistols, parts, or components. Components and parts that do not specifically have Glock listed as the manufacturer are made by their respective company. Such parts may be intended for use with Glock components but are not produced by Glock, Inc.. For additional genuine Glock, Inc. and Glock Ges.m.b.H products and parts visit www.glock.com.
1 Rating
I have 4 of these, and they are terrific . I can shoot the bullet holes after sighting it in..
I have 4 of these, and they are terrific . I can shoot the bullet holes after sighting it in. I usually give my targets to someone at the range since there isn't many holes.
November 29, 2022
Will it fit a Glock 31?
Answer:
No this will not fit. If your G31 is a Gen 3-5, then try item # 7-MCKGEN2T.
Will it fit the XD.40?
Answer:
No this will not fit.
Will it fit a canik TP9SA?
Answer:
No this will not fit.
Does it fit the GST9 or the GST9 mod 1? If not do you know if they have any that will?
Answer:
No this will not fit. Unfortunately Command Arms is not making one for the GST9 at this time.
Can I use a flick 22 on this kit?
Answer:
No this will not fit.
Will this still fit with a 6 inch plus barrel (thread protector) installed in my Glock 20 Gen 4 10mm?
Answer:
No this will not fit.
Does this work with the Glock 20C?
Answer:
Probably not, however, Command Arms does not list fitment for the G20C. I recommend reaching out to the manufacturer directly for clarification.
Will it fit a Glock 22?
Answer:
No this will not fit. Check out item # 109177 and 122360 and 109178.
Will this fit a 1911 colt Government PISTOL ft?
Answer:
No this will not fit.
Is there a conversion kit for A Beretta?
Answer:
Command Arms does not currently make one for any Beretta models.
Do you have this for a 9mm?
Answer:
Yes we carry this for a Glock 9mm. Check out item # 109177.
Does it support glock 40??
Answer:
No this will not fit.
Do any fit a SCCY cpx2?
Answer:
No this will not fit.
Will a Glock 30 gen 4 work in this unit?
Answer:
No this will not fit.
Do they make this for a model 22 .40cal ??
Answer:
Yes, we have this available with the standard kit. Check out item # 109177. Please note, this will fit the G22 Gens 3-4, however, it does not fit the G22 Gen 5.
Will this fit a Smith&Wesson m&p .45?
Answer:
No this will not fit.
Will this fit a Glock 40 gen 4?
Answer:
No it will not.
Will it still work if I have an extended slide lock release lever?
Answer:
This will work with a standard right hand extended slide release. However, it may not work with ambidextrous slide releases.
Can you tell me which one of these MCK's will fit my Taurus G2C and G3C? Thanks
Answer:
Check out items # 140374 and 140375.
Will this fit a glock 19 gen 5?
Answer:
No it will not. I recommend item # 109178.
Will this fit a glock 20 gen 2?
Answer:
It may not fit a gen two as it requires the Accessories rail.
Not sure if my guestions are getting through. Will this fit a model 40 in 10mm?ifoit won't do you have one that it's will?
Answer:
This will not fit a Glock 40 and CAA does not make a Micro Roni for the G40 at this time.
Do you ma k e one for beretta 92fs?
Answer:
No, Command Arms has not yet made a Micro Roni for the Beretta 92.
Is it compatible with Glock 30SF?
Answer:
No it is not.
Will this fit my Taurus 9mm?
Answer:
No it will not.
Will it fit glock 22 ?
Answer:
This will not fit a Glock 22. Check out item # 109177.
Will it fit Glock 23 gen 3?
Answer:
It is not designed for it. Try item 109178
Will it fit a Glock 35 gen 3 ?
Answer:
No it will not.
Can it fit a Glock 30?
Answer:
No it will not.
Will this fit a Canik TP9SF ELITE?
Answer:
No it will not.
Are there any conversion kits that work with a mossberg mc1 9mm?
Answer:
We are not aware of any conversion kits on the market.
Will this work with a PF45 Glock 21 Poly80 build?
Answer:
No. It will not fit the P80. CAA does not currently produce an MCK for the P80's in .45 ACP.
Does this fit the Glock model 21sf ?
Answer:
Yes it should.
Will a SAR 9 fit in this kit?
Answer:
No it will not. Per the written description: Fits: GLOCK 20/21 Gen3 and Gen4
Will this work with a Glock 21sf?
Answer:
Yes it should.
Is this compatible with glock g 34?
Answer:
No it will not. Try item 7-MCK3441GEN2
Will it work with a Glock g45?
Answer:
No. The GLOCK G45 would use the GLOCK 17/19 MCK. See item# 122363
Will this fit a Walther?
Answer:
No it does not. CAA does not currently make a MCK Micro Roni for any of the Walther models.
Will it fit a Masada?
Answer:
No it will not. CAA does not list a fitment for the Masada.
Will this fit a full auto Glock?
Answer:
It depends on which model GLOCK you have. Per the written description: Fits: GLOCK 20/21 Gen3 and Gen4
Do you make one for s&w m&p full size .40?
Answer:
We are a retailer not a manufacturer. CAA is the manufacturer. See item# 7-CAAMCKMPGEN1G
Will this work with a glock 43
Answer:
No it will not. Please see item# 7-MCK4348GEN2
Is the conversion compatible with BERSA THUNDER 9 9X19 Appreciate your response.
Answer:
No it will not. CAA is not currently producing any MCK Micro Roni models for any of the Bersa models.
Will this fit a Taurus G3C? If not, is there a model # that will?
Answer:
No it will not. CAA is not currently producing any MCK Micro Roni models for any of the Taurus models.
Guessing this won't work with the glock 19x?
Answer:
No it will not, try item 7-CAAMCK
Will this fit a Gen 5 Glock 21?
Answer:
CAA states it only fits GLOCK 20/21 Gen3 and Gen4
Will it fit the Glock 19 gen 4
Answer:
No it will not. Item 109176 will fit.
Will it fit Glock 21SF Gen 3
Answer:
Yes it should
Will fit hi point 9mm?
Answer:
It will not
will any other brand of gun fit in there besides Glock
Answer:
Yes, CAA makes models for other handguns.
Will it work with a Glock 44, which is a 22 caliber? If not, will any of their similar models?
Answer:
No it will not fit. CAA doesn't currently make anything for the GLOCK 44
Will this work with the Glock 20 gen 3?
Answer:
Yes
Hi, will this fit the gen 5 45 9MM
Answer:
No, you will need item # 7-CAAMCKT.
I'm sure the answer is no, but can this accommodate a 6 inch barrel, or does it have top be standard length?
Answer:
This will accommodate a 6" barrel. Yes.
Does this have the updated charging handle?
Answer:
This has the current production charging handle.